New HARDWARE / DIY Duraflex 1.25inch Sliplok Triglide duraflex-4789 $0.50 The Sliplok Triglide Adjuster is perfect in any strap or webbing application where variable length is required. It also works well in combination with other buckles as a means of securing loose webbing needs. This version is slotted for 1.25inch webbing. 1 unit = 1 Tri-GlidePart #4789 View
New Out-of-Stock HARDWARE / DIY Duraflex 1inch Single Gate Keeper duraflex-w830 $1.15 A fairly unique design where like a loop, but accessible when desired by using a spring gate. This version is setup with 1inch webbing in mind.Note: Just one raw Single Gate Keeper is included per unit, no other parts come with it. Part #W830 View
New HARDWARE / DIY Loop Fastener - Sew On hard-00110 $0.60 Good MIL-Spec stuff and we are selling it by the foot. In reference to Hook and Loop Fastener: Hook is the male side with little hooks while loop is the the soft female side. This is the sew on version of just the LOOP side. If multiple units of one color are ordered, we do not add additional cuts. 1 unit = 1 foot. View
New Out-of-Stock HARDWARE / DIY Duraflex 1.5inch Double Gate Keeper duraflex-w819 $1.55 A fairly unique design where one side is a standard lash point while the other is accessible when desired by using a spring gate. This version is setup with 1.5inch webbing in mind for both slots.Note: Just one raw Double Gate Keeper is included per unit, no other parts come with it. Part #W819 View
New HARDWARE / DIY Duraflex 1inch Double Gate Keeper duraflex-w836 $1.25 A fairly unique design where one side is a standard lash point while the other is accessible when desired by using a spring gate. This version is setup with 1inch webbing in mind for both slots.Note: Just one raw Double Gate Keeper is included per unit, no other parts come with it. Part #W836 View
New HARDWARE / DIY Duraflex 1.5inch Heavy Duty D-ring duraflex-4775 $0.50 An acetal based D-ring design, this heavy duty series is made to handle a smidge more weight than the standard D-ring series. This one in particular is slotted for 1.5inch webbing. Just one raw D-ring is included per unit, no other parts come with it. Part #4775 View
HARDWARE / DIY Woodland M81 Loop Sew-On MMI hard-00109-woodland $4.50 Woodland M61 Loop Fastener. Loop being the fuzzy/loopy side of hook and loop. Sold by the yard, 1 unit = 1 yard, this is the sew on version.Made by MMI textiles / Berry compliant. View
HARDWARE / DIY Multicam Loop Sew-On MMI hard-00108-multic $5.00 Multicam Loop Fastener. Loop being the fuzzy/loopy side of hook and loop. Sold by the yard, 1 unit = 1 yard, this is the sew on version.Made by MMI textiles / Berry compliant. View
Out-of-Stock HARDWARE / DIY Multi Mount - Sling Mount di-qd-multi-mount $24.95 Hence the name, this is a very adaptive sling mount that attaches by 1913 Picatinny Rail. Connection points include: QD on top, Another QD on one side, Small hole on the other side, and the mount itself is slotted for 1inch webbing. Although a down side it must be slid into place on a rail, the more simplistic design also makes it more durable. As most... View
Out-of-Stock HARDWARE / DIY QD Sling Connector di-qd-sling-con $18.00 This slide on connector is made to add a QD connection point to a sling, a great option to give a two point sling the option to switch to a single point setup. Currently offered in 1inch slot version. QD swivel is NOT included.-6061 Aluminum, Hardcoat Anodized-Made in the USA View
Out-of-Stock HARDWARE / DIY QD Sling Swivel D Loop di-qd-swivel-d $12.95 These are a nice modern take on QD (Quick Detach) Swivels commonly used for weapon slings. Release is performed by pressing the top "button"; this particular swivel button is recessed to be accidental release resistant, however is still easy to release when purposefully pressed. Rather than a classic loop this variant sports a D-ring style loop promoting... View
HARDWARE / DIY QD Sling Swivel Oval Loop di-qd-swivel-oval $12.95 These are a nice modern take on QD (Quick Detach) Swivels commonly used for weapon slings. Release is performed by pressing the top "button"; this particular swivel button is recessed to be accidental release resistant, however is still easy to release when purposefully pressed. A classic oval loop and currently offered in 1inch and 1.25inch webbing slot... View
HARDWARE / DIY 70E Elastic Webbing web-70e $1.80 A Polyester woven elastic that has a good amount of thickness which can offer more padding compared to lower profile elastics. Similar to nylon products, after cutting it is fairly easy to seal ends with heat like from a flame. Currently sold by the YARD, so 1unit = 1yard. If multiple yards (of 1 color) are purchased it will be one chunk / uncut. View
HARDWARE / DIY AB Slinghook 1inch hard-00107 $3.70 AB brand's offering of Mashhook style hardware for sling attachment. The original intent is to be an alternative hardware option to HK style snap-hooks as sometimes accidental releases can be created with normal sling usage rotation. Rather than a specific spring, the Slinghooks use default material tension to keep closure, practically eliminating... View
HARDWARE / DIY AB Metal Loop Rectangle Welded 1inch hard-00106 $0.55 Simple metal rectangle, slotted for 1inch webbing and welded for strength. Spaced for more thickness with interior space being approx 1-1/8inch (28mm) x 5/16inch (9mm) Berry compliant / made in the USA. 1unit = 1 loop and no other items are included View
HARDWARE / DIY AB Metal Loop Oval Welded 1inch hard-00105 $0.55 Simple metal oval, slotted for 1inch webbing and welded for strength. Spaced for some wiggle room with interior space being approx 1-1/8inch+ (29mm) x .25inch (6mm) Berry compliant / made in the USA. 1unit = 1 loop and no other items are included View
HARDWARE / DIY AB Metal D-ring Welded 1inch hard-00104 $0.55 Simple metal D-rings, slotted for 1inch webbing and welded for strength. Berry compliant / made in the USA. 1unit = 1 d-ring and no other items are included View
HARDWARE / DIY MIL-W-5664 Elastic Webbing web-5664 $1.60 MIL-SPEC MIL-W-5664 Elastic Nylon Woven Webbing, Type II Class ISlim and durable, a good option when need to add a little stretch. Like most nylon webbing, after cutting it is fairly easy to seal ends with heat like from a flame. Currently sold by the YARD, so 1unit = 1yard. If multiple yards (of 1 color) are purchased it will be one chunk / uncut. View
Out-of-Stock HARDWARE / DIY Kong 751NNN6CNKK Mini D Screw-lock kong-751nnn6cnkk $8.00 This carabiner design is for those looking for a smaller EDC size, but is quite the durability upgrade over novelty carabiners. Coming in a shiny black it sports a screw gate for security options and key-nose to prevent snagging.NOT FOR HUMAN LOAD-BEARING however is rated for 600kg made of aluminum. Approx 3.125" x 1.875" with 13mm gate opening Weight:... View
Out-of-Stock HARDWARE / DIY Kong 751NN0400KK Mini D Carabiner kong-751nn0400kk $6.00 This carabiner design is for those looking for a smaller EDC size, but is quite the durability upgrade over novelty carabiners. Coming in a matte black it sports a simple straight gate for easy access and key-nose to prevent snagging.NOT FOR HUMAN LOAD-BEARING however is rated for 600kg made of aluminum. Approx 3.125" x 1.875" with 16mm gate opening... View
Out-of-Stock HARDWARE / DIY Keyring 1.125nch ID 1.375inch OD keyring-1-125in $0.75 Some simple EDC kit, these are beefy dark grey keyrings. Approx 1.125" inside diameter, 1.375" outside diameter.1unit = 1 keyring and no other items are included View
Out-of-Stock HARDWARE / DIY MSM QASM Vertical Attachment Kit hard-00103 $7.00 This hardware adapter kit is for those that wish there was a way to mount ITW QASM buckles vertically. A kit comes as a pair including:-2 ITW 810-1076-xxxx – QASM Body/Female, and 2 laser cut laminate pieces.The fit is loose on 1" PALS webbing and snug on laser cut PALS 2" spacing, either setup is secure and requires no sewing. Additionally the QASM parts... View
HARDWARE / DIY Austri Alpin Pro Style Cobra Buckle aa-cobra-ps $23.50 NEW latest generation PRO STYLE Cobra buckles include changes to prevent only securing one clip instead of both and slots to minimize debris getting in the way of securing the buckle. A new HPC coating is also utilized to offer improved coating durability.AustriAlpin COBRA® quick releases buckles are, without equal, the world's safest, most finely... View
HARDWARE / DIY Duraflex Molle Tee Mount duraflex-9703 $0.50 This is a unique piece made to cause a stop point when connections are dropped into PALS webbing slots. Useful especially if the connected hardware is too large to fit through a PALS slot, the MOLLE Tee can be turned to a side to pass through and then back to the normal position once exposed to secure the mount. Note: Just one raw Molle Tee is included... View
HARDWARE / DIY AB HK Style SnapHook 1inch slot hard-00102 $3.75 AB brand USA made take on the HK style 1" slot Snap Hooks: offering cool guy colors and solid quality. View
Out-of-Stock HARDWARE / DIY ITW 3DSR Buckle 1inch itw-101-3333 $5.99 The 3DSR tactical buckle was made specifically for hard use applications such as Ruck Packs, Slings, and Plate carriers. Core features include: Easy release even while under load 300 pound load capacity Shaped to fit in palm for a consistent squeeze release If overloaded will release before breaking Fragmentation resistant / solid chance of still... View
HARDWARE / DIY A-A-55301 Jacquard Multicam Webbing web-55301-jac $2.50 A-A-55301 style Nylon Webbing is similar to MIL-W-17337, commonly used for straps, PALS webbing, and more. It is fairly thin (approx 0.039-0.053 inches), yet offers a great breaking strength being 1000 lbs at 1" wide. Like most nylon webbing, after cutting it is fairly easy to seal ends with heat like from a flame. This particular one is multicam in... View
HARDWARE / DIY A-A-55301 Nylon Webbing web-55301 $1.60 A-A-55301 style Nylon Webbing is similar to MIL-W-17337, commonly used for straps, PALS webbing, and more. It is fairly thin and flexible (approx 0.039-0.053 inches), yet offers a great breaking strength being 1000 lbs at 1" wide. Like most nylon webbing, after cutting it is fairly easy to seal ends with heat like from a flame. Currently sold by the... View
HARDWARE / DIY ITW Looploc 1inch itw-111-0100 $0.25 A simple hardware loop for various webbing interfacing such as adding connections or slack management. 1 unit = 1 LooplocITW Part Number: 111-0100-xxxx View
HARDWARE / DIY ITW TriGlide 1.5inch itw-105-0150 $0.90 The Triglide Strap Adjuster is perfect in any strap or webbing application where variable length is required. It also works well in combination with other buckles as a means of securing loose webbing needs. 1.5inch in particular is common for webbing adjustment on waist belts for packs. 1 unit = 1 Tri-GlideITW Part Number: 105-0150-xxxx View
HARDWARE / DIY ITW GT Ruck 1inch Ladderloc itw-154-2100 $1.00 Hence the ruck part of the name, this is a beefed up version of a ladderlock to give the same functionality while holding up better to harder use. Hole on the pull tab allows for knotting cord for further pull options. 1 unit = 1 GT RuckITW Part Number: 154-2100-xxxx View
Out-of-Stock HARDWARE / DIY ITW GTSR Waveloc Split-Bar 1inch Female itw-810-1082 $1.00 NOTE: Only the female-body piece is sold on this page. For those tired of their straps slipping through normal buckles on actions such as rucking with speed, the Wavelocs offer a nice strong hold on 1" webbing. These will interface with other ITW and Duraflex 1" male pieces. Being different from the original Waveloc this split-bar version allows for a... View
Out-of-Stock HARDWARE / DIY ITW GTSR Waveloc Split-Bar 1inch Male itw-810-1083 $1.00 NOTE: Only the male-latch piece is sold on this page. For those tired of their straps slipping through normal buckles on actions such as rucking with speed, the Wavelocs offer a nice strong hold on 1" webbing. These will interface with other ITW and Duraflex 1" female pieces such as repair buckles, surface mounts, and the QASM. Being different from the... View
HARDWARE / DIY MIL-W-17337 Nylon Webbing web-17337 $1.50 MIL-W-17337 style Nylon Webbing has been used in tactical goods for quite some time now, commonly used for straps, PALS webbing, and more. It is fairly thin and flexible (approx 0.038-0.050 inches), yet offers a great breaking strength being 1,200 lbs at 1" wide. Like most nylon webbing, after cutting it is fairly easy to seal ends with heat like from a... View
Out-of-Stock HARDWARE / DIY ITW GT Waveloc XL 1inch Male itw-810-1081 $0.75 NOTE: Only the male piece is sold on this page. For those tired of their straps slipping through normal buckles on actions such as rucking with speed, the Wavelocs offer a nice strong hold on 1" webbing. These will interface with other ITW and Duraflex 1" female pieces such as repair buckles, surface mounts, and the QASM. Being different from the original... View
HARDWARE / DIY AB G-Hook Wave hard-00101 $2.25 AB Brand NOTE: These are the middle bar with wave variant to be more slip resistantG-hooks offer compact webbing mods connecting with a simple hook to 1" webbing and offering 1" slots to connect additional webbing. Example attachment points include the sides of tac-vests or up on shoulder straps (packs or vests). Since metal, the G-hooks are very flat... View
HARDWARE / DIY AB G-Hook Flat hard-00100 $2.00 AB Brand NOTE: These are the standard / flat versionG-hooks offer compact webbing mods connecting with a simple hook to 1" webbing and offering 1" slots to connect additional webbing. Example attachment points include the sides of tac-vests or up on shoulder straps (packs or vests). Since metal, the G-hooks are very flat compared to a typical SRB... View
HARDWARE / DIY Kong Tango kong-tango $27.99 The Kong Tango: A longtime favorite for tactical safety connection. A lot like a caribiner with a great balance of speed and security. Gate will not open until the rear safety is engaged which occurs naturally when gripped. Slot will fit many applications, but flat side works nice with 1" webbing. Approx 5.5" long x 2.75" wide. View
Product available with different options HARDWARE / DIY AB Rounded Oval Slide Dual Slot 1inch hard-00099 $0.60 A simple, yet handy slide. Can be used as a tri-glide or get creative such as making it interface with other hardware to create modular attachment points. Since flat and has more length than width it can be inserted into hardware loops creating a secure snag. View
Out-of-Stock ACCESSORIES Tough Hanger toughhook-0002 $14.99 Tired of finding creative ways to hang your heavy kit to get it off the floor? The Tough Hanger by Tough Hook is the easy fix with additional room for creative functionality. Made to hold heavy setups such as battle vests, scuba rigs, or whatever cool guy stuff you want to hang without having to worry about the hook exploding. While the original Tough... View
HARDWARE / DIY Multicam Black Loop Sew-On mmi-loop-sew-4in-mblack $8.00 Harder to find Multicam Black Loop Fastener. Loop being the fuzzy/loopy side of hook and loop. Sold by the yard, 1 unit = 1 yard, this is the sew on version.Made by MMI textiles / Berry compliant. View
HARDWARE / DIY Halco Luxmed L20 60in Loop halco-lux-l20-60in-black $18.60 Need to make a morale patch banner? This Knit Loop Fabric is great for those who need a large area to mount hook-backed patches or accessories. The holding strength is a good balance where will secure hook items, yet isn't overly difficult to remove items either; appropriate for a merchant setup. The width is 60", Sold by the yard, 1 unit = 1 yard, this... View
Product available with different options HARDWARE / DIY Duraflex Every Which Way Buckle Female duraflex-9395 $1.50 A unique buckle part to allow mounting to PALS / MOLLE webbing both vertically and horizontally. Duraflex offers solid Berry Compliant hardware and these parts can interface with other 1" ITW Military buckle parts too. Note: This product is just for the female part, 1 unit = 1 buckle. Part #9395 View
HARDWARE / DIY Duraflex Siamese Slik Clip duraflex-6712 $0.75 Unique snap-on hardware to offer options to attach pouches or straps to gear. Slotted for 1inch webbing it also works well with PALS / MOLLE webbing. Check out the Regular version if you'd like only one side to have a snap opening. 1 unit is 1 clip. Part #6712 View
HARDWARE / DIY Duraflex Slik Clip duraflex-6548 $0.55 Unique snap-on hardware to offer options to attach pouches or straps to gear. Slotted for 1inch webbing it also works well with PALS / MOLLE webbing. Check out the Siamese version if you'd like both sides to have a snap opening. 1 unit is 1 clip. Part #6548 View
Product available with different options ACCESSORIES Tough Hook Hanger toughhook-0001 $16.99 Tired of finding creative ways to hang your heavy kit to get it off the floor? The Tough Hook Hanger is the easy fix with additional room for creative functionality. Made to hold heavy setups such as battle vests, scuba rigs, or whatever cool guy stuff you want to hang without having to worry about the hook exploding. These things are so tough one can... View
Product available with different options HARDWARE / DIY ITW GTSR SPLIT-BAR LATCH Male 1inch itw-810-1072 $1.00 A handy split-bar buckle part to allow more repair style buckle options. Great for replacing pack hardware and adding buckles to PALS webbing. These parts can interface with other 1" Duraflex Military buckle parts too. Note: This product is just for the male side and fixed slot / non adjustable style.ITW part number: 810-1072-xxxx View
HARDWARE / DIY Kong Buckle 928F.44 kong-928f44 $10.00 A lesser known buckle, but made by Kong so you know it is good stuff. Functions similar to a cobra buckle so you get the stab style functionality, but made of carbon steel so feels a bit more heavy while providing plenty of strength all while being economical. Approx 4.5oz slotted for 1.75"ish webbing. Basic spec sheet: <KONG BUCKLE 928F.44> View
HARDWARE / DIY Adapt Pack Attachment Kit hard-00098 $9.95 For those who would like additional attachment hardware for their adapt pack. Example uses: if one wanted to pre-setup the hardware on an additional vest or large pack to allow quick attachment of an adapt pack.Parts include the webbing platforms with malice clips / male SRB parts and female parts of QASM buckles.Although made for the adapt pack, these... View
HARDWARE / DIY Duraflex Snap On Male Buckle 1inch hard-00097 $1.00 A handy snap-on buckle part to allow more repair style buckle options. Great for replacing pack hardware and adding buckles to PALS webbing. Duraflex offers solid Berry Compliant hardware and these parts can interface with other 1" ITW Military buckle parts too. Note: This product is just for the male side and fixed slot / non adjustable style. Part #9739 View
HARDWARE / DIY Duraflex Snap On Female Buckle 1inch hard-00096 $1.30 A handy snap-on buckle part to allow more repair style buckle options. Great for replacing pack hardware and adding buckles to PALS webbing. Duraflex offers solid Berry Compliant hardware and these parts can interface with other 1" ITW Military buckle parts too. Note: This product is just for the female side and fixed slot / non adjustable style. Part... View
Out-of-Stock TACTICAL GEAR AustriAlpin Cobra® Buckle - Anodized hard-00095 $23.00 Some people like the older anodized coats on COBRA® buckles, so we got in a little batch for the fans. Currently just offering Standard Foliage in 1.75" slot. (Complete buckles) AustriAlpin COBRA® quick releases buckles are, without equal, the world's safest, most finely crafted, and strongest load bearing quick release fasteners available. They are also... View
Out-of-Stock HARDWARE / DIY Kong Frog - OEM kong-frog-003 $22.00 Kong doesn't offer the Frog Express version quite like they used to, but we were able to get a batch of OEM versions. This Frog variant has no markings, yet is mostly black, and uses the screw bolt in the back. The webbing slot size is more for .75", but one can still ram 1" tubular webbing in there just fine. For those concerned about the super plain... View
Out-of-Stock HARDWARE / DIY ITW GTLL 100 Split-Bar 1inch LadderLoc hard-00094 $0.65 Based on the original GTLL 100, but with a repair style slot for no-sew repairs. These are solid ladder-locks made with 1" webbing tactical product use in mind. Great for all kinds of quick adjustment applications; slings and backpack straps being a couple of examples. Typically attached on back slot, the front slot then offers one way webbing movement... View
HARDWARE / DIY MSM Snap Shackle Stout Swivel hard-00093 $10.00 Our own mix taking stainless steel shackles and getting them locally powder coated: Sporting captive pins and welded rings for long term durability. This is a beefy yet short version of the usual snap shackle for heavier quick release applications Also featuring a swiveling slot for 1" webbing. Spring loaded, latch will not release until ring is pulled... View
Out-of-Stock HARDWARE / DIY Maxpedition PZL Positive Grip Zipper Pulls - Large max-PZL $10.99 The PZL Positive Grip Zipper Pull (Large) are easy to use and require only a one finger pull action. They are shaped and textured for enhanced retention, and easy to grab with gloves.SOLD IN PACK OF 6. View
Product available with different options HARDWARE / DIY BFG ULoop bfg-UWL-UL1 $17.95 Sling hooks and clips are on borrowed time! The world no longer has to tolerate loud, jangly sling attachments, hooks that eat up aluminum and plastic eyelets, or hardware pieces that take too long to attach and remove. With the Patent Pending ULoop finally on the scene, the hook and clip extinction event has begun. The ULoop™ brings a level of... View
Out-of-Stock HARDWARE / DIY Maxpedition TacTie PJC5 max-PJC5 $11.99 The TacTie Polymer Joining Clip (PJC) is a heavy duty injection molded hardware component developed by the Maxpedition design team, and it comes in 2 sizes: PJC3 and PJC5. It is used to integrate accessory pockets and pouches onto packs, vests, ATLAS™ surfaces, PALS surfaces and MOLLE equipment in an interlocking manner. The TacTie PJC is secure when... View
Out-of-Stock HARDWARE / DIY Maxpedition TacTie PJC3 max-PJC3 $10.99 The TacTie Polymer Joining Clip (PJC) is a heavy duty injection molded hardware component developed by the Maxpedition design team, and it comes in 2 sizes: PJC3 and PJC5. It is used to integrate accessory pockets and pouches onto packs, vests, ATLAS™ surfaces, PALS surfaces and MOLLE equipment in an interlocking manner. The TacTie PJC is secure when... View
Out-of-Stock HARDWARE / DIY Adhesive Hook VELCRO® Brand hard-00091 $2.00 Sold by the foot, 1 unit = 1 foot. This is full on Military VELCRO® Brand Hook / Male side done with adhesive / sticky back - brand #72. Great for helmets, small electronics, weapon furniture, and more. The adhesive achieves full bond strength in 24 hours (after applying on the gear surface), and works well in temperature ranges from -20° F to 225° F. View
HARDWARE / DIY AustriAlpin Cobra® Buckle 2.25inch Slot hard-00090 $25.00 The same great Cobra Buckle, just in a less common 2.25inch slot size. Sometimes a bit more space is needed for things like duty belt retro fit projects. AustriAlpin COBRA® quick releases buckles are, without equal, the world's safest, most finely crafted, and strongest load bearing quick release fasteners available. They are also the only stab-lock... View
Out-of-Stock HARDWARE / DIY MSM Mini Mod-D Carabiner MkII hard-00089 $7.00 Our first batch did well and now we bring you with MKII with low snag keynose style!: Overall approx 3.5" x 2" these make for great EDC and backup carabiners. The smaller size cuts down on bulk being better for holding other objects like sets of keys while at the same time these are real deal load bearing capable carabiners if you end up having to do some... View
Out-of-Stock HARDWARE / DIY PUP Platforms hard-00040 $28.95 Finally got around to adding the new variants!The PUP (Pals Universal Platform) from Bawidamann Blades is a rugged, adjustable MOLLE/PALS platform solution for kydex knife sheaths, small magazines, lights and other items that is compatible with many retention systems and all MOLLE/PALS webbing. ST801 Super Tough Nylon - Made and assembled in the... View
Out-of-Stock HARDWARE / DIY MSM Snap Shackle Mini hard-00085 $5.00 Cool hardware for quick release applications, smaller than usual size. Spring loaded, latch will not release until ring is pulled sideways away from the shackle. Latch can be resecured without pulling ring. Colors are powder coated to offer some tac-colors. Main shackle piece is approx 0.875" x 1.25" View
HARDWARE / DIY TT Malice Clip Fight-Light hard-00084 $2.00 Tactical Tailor's latest gen Malice clips, the new Fight-Light series: Same heavy duty construction and they won’t come unwoven even if accidentally unlocked. They’re not affected by extreme temperature changes, they will never corrode, and on this latest version now they’re easier to weave due to the non-square edges, significantly lighter, 15% stronger,... View
Out-of-Stock HARDWARE / DIY AustriAlpin Cobra® Sport - FM Buckle hard-00083 $14.00 Taking the success of the Cobra® Buckle, Austri Alpin now has released a Sport - FM(Fashion Model) where you get the same great stab insert design features and quality in a much smaller size. Giving up the human load bearing rating, it sill is rated 800lb working capacity for all kinds of belt and pack gear type projects.NOTE: Just got in a resupply batch... View
HARDWARE / DIY 550 Cord - Paracord hard-00082 $4.00 7-strand 550 cord, also known as Paracord, 550 refers to the breaking strength. The outter sheath gives the color then smaller white cords are in the interior. Very useful for all kinds of lashing needs, creating pull cords, bracelets, and much more. Ends can be eaily sealed with flame heat. Currently sold by the YARD. Thus a 10 unit pack = 10 yards /... View
Out-of-Stock HARDWARE / DIY ITW Bar Button hard-00081 $0.60 Also known as Canadian style buttons, good for all kinds of projects including paracord, gear, and clothing. This product was developed to meet specific requirements for MILSPEC Govt programs and provides superior physical properties versus conventional melamine 4-hole sewn buttons. The GhillieTEX material not only provides the user with the highest... View
HARDWARE / DIY Cobra® Buckle D-Ring hard-00080 $29.95 Austri-Alpin took the proven Cobra® Buckle and integrated a big boy D-ring so riggers belts no longer need a totally separate metal ring connection point. Strength rated as follows:~ Buckle: 18kN / 4000lb MBS (straight pull). 36kN Loop configuration.~ Dring: 22kN / 5000 lb MBS (straight pull).Far exceeds ANSI Z359.1, CSA, EN, UIAA, and NFPA standards for... View
FIELD SUPPLIES Live Fire Gear - 550 Fire Cord lfgear-00002 $9.99 Very similar to typical 550 cord, however an extra red interior strand is added that burns a nice consistent flame as opposed to the usual white strands and outer shell just melting. This way you still get the functionality of 550 cord yet with tinder ability integrated. Simply deploy your 550 FireCord to meet all of your parachute cord needs. When you... View
Out-of-Stock HARDWARE / DIY ITW GTSR 1inch Waveloc Body hard-00078 $0.75 NOTE: Only the female / body piece is sold on this page. For those tired of their straps slipping through normal buckles on actions such as rucking with speed, the Wavelocs offer a nice strong hold on 1" webbing. These will interface with other ITW 1" male pieces. Due to the tight fit, only a single strip of webbing will fit through the slots so in some... View
HARDWARE / DIY ITW GTLL 1inch Ladderloc hard-00077 $0.45 These are solid ladder-locks made with 1" webbing tactical product use in mind. Great for all kinds of quick adjustment applications; slings and backpack straps being a couple of examples. Typically attached on back slot, the front slot then offers one way webbing movement until tilted to offer two way webbing movement. With the lanyard hole one can add a... View
Out-of-Stock HARDWARE / DIY MSM Snap Shackle Large hard-00076 $10.00 Our own mix taking stainless steel shackles and getting them locally powder coated. Sport captive pins and welded rings for long term durability. Ranger Green hopefully coming in the near future.This is a larger version of the usual snap shackle for heavier quick release applications. Spring loaded, latch will not release until ring is pulled sideways... View
HARDWARE / DIY MSM Snap Shackle Medium hard-00075 $6.00 Our own mix taking stainless steel shackles and getting them locally powder coated. Sport captive pins and welded rings for long term durability. Ranger Green hopefully coming in the near future. A quick release snap shackle in a common 2" overall length size. Classic hole slot , spring loaded, latch will not release until ring is pulled sideways away... View
Out-of-Stock HARDWARE / DIY MSM Snap Shackle 1" slot hard-00074 $6.00 Our own mix taking stainless steel shackles and getting them locally powder coated. Sport captive pins and welded rings for long term durability. Ranger Green hopefully coming in the near future.This version sports a 1" wide webbing slot, cool hardware for quick release applications. Spring loaded, latch will not release until ring is pulled sideways away... View
HARDWARE / DIY Spring Loaded Cam Buckle hard-00073 $5.50 Sometimes referred to as a quick release cam buckles, these have been in use since the ALICE gear era and are still used on cool guy slings today. General idea is they restrict webbing movement to one direction until the spring release is pulled to allow webbing movement in both directions. Made of metal they are quite durable and the design offers a... View
HARDWARE / DIY BFG Molded Burnsed Socket hard-00071 $19.95 A great piece of hardware to create a QR hole that can be attached by webbing offering great sling multipoint options and more. Although currently slotted more for 1.25" webbing, can work fine on 1" webbing as well. Constructed with a metal QR hole and polymer base offering a great balance of durability and affordability. View
On sale! Out-of-Stock HARDWARE / DIY BFG RED Swivel hard-00069 $25.00 Rapid Emergency Detachment Swivel (RED Swivel): A great piece of hardware that takes the concept of a QR swivel, but works with the gross motor movement of a grab and pull instead of the push of a small button. Fits anywhere a normal QR swivel could go. The patent pending RED™ Swivel releases with a straight pull on the sphereo-conical knob instead of... View
HARDWARE / DIY ITW GT Cobra® Buckle hard-00066 $4.75 ITW Nexus North America is proud to partner with AustriAlpin, the GT Cobra high strength polymer buckle system. Designed to be more robust than any other type of plastic hardware on the market, with a targeted tensile load of 500lbf, the GT Cobra buckle is a 100% Polymer system with no metal components. A few of the many GT Cobra advantages include its... View
Out-of-Stock HARDWARE / DIY ITW G-Hook Flat hard-00065 $2.25 NOTE: These are the standard / flat version 09241-22-2188xG-hooks offer compact webbing mods connecting with a simple hook to 1" webbing and offering 1" slots to connect additional webbing. Example attachment points include the sides of tac-vests or up on shoulder straps (packs or vests). Since metal, the G-hooks are very flat compared to a typical SRB... View
Out-of-Stock HARDWARE / DIY AUSTRIALPIN Cobra® Frame hard-00064 $13.00 Based on the AustriAlpin COBRA® buckle styling, these special tri-glides feature extremely high strength (18kN) and low profile design. Made of 7075 grade aluminum alloy with stainless steel adjuster bar. NOTE: AA has been transitioning from annodizing colors to powder coat colors so the coyote color can vary quite a bit, check in with us if you require... View
Out-of-Stock HARDWARE / DIY MSM QR Keychain Econo hard-00063 $8.00 The core strap is made of VELCRO® Brand ONE-WRAP® which allows placement of mini patches 2"x1" now using our powder coated snap shackles. Most folks will connect the QR shackle to something like a belt loop, but feel free to get creative connecting to other gear such as vests and packs. Currently made in house at MSM in the USA.-No Patches Included. NOTE:... View
Out-of-Stock HARDWARE / DIY MSM QR Belt Rig Econo hard-00062 $8.00 Based on our original QR belt rig, this variant uses less expensive parts to give good bang for the buck. We use one of our 2nds snap shackles which doesn't have a super durable coat, but functions great and instead of a g-hook a simple tri-glide is used. Although made with belts in mind, feel free to get creative connecting to other gear such as vests... View
Out-of-Stock HARDWARE / DIY 54inch Multicam Loop VELCRO® Brand hard-00061 $65.00 Have a special large project like a morale patch banner where only the finest MIL velcro will do? This is full on VELCRO® Brand Loop fuzzy side done in Multicam camouflage with excellent color matching. The width is 54", Sold by the yard, 1 unit = 1 yard, this is the sew on version. If multiple yards are purchased we will assume to pack without... View
HARDWARE / DIY Positive Locking Cord hard-00060 $3.00 This Berry Compliant Cord is a similar width to 550 cord, however the rough texture makes it very grippy and hence the name, positive locking. Great for all kinds of lashing and tactical crafts, Just like 550 cord, the ends can be easily burned to seal / finish. Currently sold by the YARD. Thus a 10 unit pack = 10 yards / approx 30 feet. View
HARDWARE / DIY Shock Cord hard-00059 $4.00 Berry Compliant Shock Cord Made with Invista IR Compliant nylon yarn. Shock cord works great as an elastic cord, popular on packs and other gear, a very handy DIY resource. Currently sold by the YARD. Thus a 10 unit pack = 10 yards / approx 30 feet. View
On sale! -40% Out-of-Stock HARDWARE / DIY AustriAlpin Cobra® Buckle hard-00058 $5.94 $9.90 Now sold as half buckles / parts to allow better customization! However one will need to buy both a male AND a female piece to make a complete buckle. (The classic standard is a male adjust and female fixed) AustriAlpin COBRA® quick releases buckles are, without equal, the world's safest, most finely crafted, and strongest load bearing quick release... View
HARDWARE / DIY ITW D-Ring hard-00054 $0.35 ITW Nexus D-Ring are perfect wherever a rigid attachment point is required. Unlike metal D-Rings, they won't rust or corrode. 1 unit = 1 D-ringITW Part Number: 110-0100-xxxx View
Product available with different options HARDWARE / DIY ITW Tri-Glide 1inch hard-00053 $0.45 The Triglide Strap Adjuster is perfect in any strap or webbing application where variable length is required. It also works well in combination with other buckles as a means of securing loose webbing needs. 1 unit = 1 Tri-GlideITW Part Number: 105-0100-xxxx View
HARDWARE / DIY Adhesive Loop VELCRO® Brand hard-00052 $4.00 Sold by the foot, 1 unit = 1 foot. This is full on Military VELCRO® Brand Loop fuzzy side done with adhesive / sticky back - brand #72. Great for helmets, small electronics, weapon furniture, and more. The adhesive achieves full bond strength in 24 hours (after applying on the gear surface), and works well in temperature ranges from -20° F to 225° F. View
HARDWARE / DIY VELCRO® ONE-WRAP® Brand 1inch hard-00051 $2.90 Sold by the YARD:VELCRO® Brand ONE-WRAP® has many uses, but for gear it really shines offering strap and wire management. A great replacement to where duct-tape was the common choice in the past, with one-wrap being much easier to release and reuse. One side is hook and one is loop, however the hook style is done lower profile so it doesn't accidentally... View
Out-of-Stock HARDWARE / DIY ITW Picatinny QASM Ramp hard-00050 $5.00 The Picatinny QASM-RAMP is designed to mount, hold and/or organize any/all of your M1913 Picatinny mountable accessories. Introduce this ultra-modular capability to your kit for unlimited mounting options in any location containing 1” sewn webbing. The new Picatinny QASM-RAMP can be used in numerous scenarios, whether it is mounting your incident camera,... View
Out-of-Stock CLIMBING Fusion Terminal 8 hard-00048 $25.00 This aluminum descender has a large inside diameter with ears and belay slots. Large design makes it ideal for fast use in adverse conditions and easier to handle heavy loads. Ears allow user the ability to tie off the rope to use both hands freely. Overall approx 6.8" x 6.7" Width Height Major Weight Weight 6.8" 6.7" 45kn... View
CLIMBING MSM Pear-S Carabiner hard-00041 $12.00 With no luck getting a hold of carabiners in good colors we had to take matters into our own hands. These are great Pear / HMS shape S-Screwlock carabiners; Light weight aluminum sporting a classic pin nose for the most strength. The Pear shape offers a large gate opening and can be a belay device using a HMS knot. The screw lock is well knurled for a... View
HARDWARE / DIY ITW ZipLine Alpha hard-00039 $0.75 These zipper pulls offer some nice benefits over traditional plastic end tabs. Since a fancy visco-elastic molded rubber-like material it will not absorb fluids. Tensile strength is around 40lbs so plenty enough to stand up to normal use, but will break away if snagged during heavy movement rather than resulting in a bad day. Different sliders will offer... View
Out-of-Stock HARDWARE / DIY MSM Retracto-Plugs hard-00038 $9.00 Based on the tech used on our DLUX CG hats we are now bringing the same great functionality for helmets. Each pack contains 2 retractors each with a plug, with hook and loop sticky-back fastener circles. The plugs themselves are triple-flange style, 25 db rated, and are also replaceable using a screw mount. Although most users will use hook and loop for... View