TACTICAL GEAR

HARDWARE / DIY

Duraflex 1.25inch Sliplok Triglide

The Sliplok Triglide Adjuster is perfect in any strap or webbing application where variable length is required. It also works well in combination with other buckles as a means of securing loose webbing needs. This version is slotted for 1.25inch webbing. 1 unit = 1 Tri-GlidePart #4789

View

Out-of-Stock

HARDWARE / DIY

Duraflex 1inch Single Gate Keeper

duraflex-w830

$1.15

A fairly unique design where like a loop, but accessible when desired by using a spring gate. This version is setup with 1inch webbing in mind.Note: Just one raw Single Gate Keeper is included per unit, no other parts come with it. Part #W830

View

HARDWARE / DIY

Loop Fastener - Sew On

hard-00110

$0.60

Good MIL-Spec stuff and we are selling it by the foot. In reference to Hook and Loop Fastener: Hook is the male side with little hooks while loop is the the soft female side. This is the sew on version of just the LOOP side. If multiple units of one color are ordered, we do not add additional cuts. 1 unit = 1 foot.

View

Out-of-Stock

HARDWARE / DIY

Duraflex 1.5inch Double Gate Keeper

duraflex-w819

$1.55

A fairly unique design where one side is a standard lash point while the other is accessible when desired by using a spring gate. This version is setup with 1.5inch webbing in mind for both slots.Note: Just one raw Double Gate Keeper is included per unit, no other parts come with it. Part #W819

View

HARDWARE / DIY

Duraflex 1inch Double Gate Keeper

duraflex-w836

$1.25

A fairly unique design where one side is a standard lash point while the other is accessible when desired by using a spring gate. This version is setup with 1inch webbing in mind for both slots.Note: Just one raw Double Gate Keeper is included per unit, no other parts come with it. Part #W836

View

HARDWARE / DIY

Duraflex 1.5inch Heavy Duty D-ring

duraflex-4775

$0.50

An acetal based D-ring design, this heavy duty series is made to handle a smidge more weight than the standard D-ring series. This one in particular is slotted for 1.5inch webbing. Just one raw D-ring is included per unit, no other parts come with it. Part #4775

View

On sale!

BLADES

KA-BAR MSM Knife 002 RAW

blade-00005

$45.00

It has been a lot longer than we all wanted, but our collaboration knife with KA-BAR is now available in the 002 variant. Being very similar to the original 001, this 002 variant sports a drop point blade to give more options. There were some production complications so to not take any longer, this is the RAW version with NO sheath. The general idea is...

View

POUCHES / PANELS

MSM Medium Patch Panel Laminate

pouch-00026

$34.00

Based on our classic small patch panel design, now made with laminate construction. Wide enough to fit name tapes and tall enough to fit most patches. As a new feature PALS webbing slots are cut on the front for more usage options. To make good use of the platform space, a zipper pocket is incorporated for additional storage. This medium size is just a...

View

POUCHES / PANELS

MSM Large Patch Panel Laminate

pouch-00027

$40.00

Based on our classic large patch panel design, now made with laminate construction. As a new feature PALS webbing slots are cut on the front for more usage options. Although the main design goal is simple to allow hook backed patch mounting on a PALS / MOLLE area of a vest or pack; to make good use of the material a zipper pocket is integrated. The...

View

POUCHES / PANELS

MSM Small Patch Panel Laminate

pouch-00025

$25.00

View

HARDWARE / DIY

Woodland M81 Loop Sew-On MMI

hard-00109-woodland

$4.50

Woodland M61 Loop Fastener. Loop being the fuzzy/loopy side of hook and loop. Sold by the yard, 1 unit = 1 yard, this is the sew on version.Made by MMI textiles / Berry compliant.

View

HARDWARE / DIY

Multicam Loop Sew-On MMI

hard-00108-multic

$5.00

Multicam Loop Fastener. Loop being the fuzzy/loopy side of hook and loop. Sold by the yard, 1 unit = 1 yard, this is the sew on version.Made by MMI textiles / Berry compliant.

View

Out-of-Stock

HARDWARE / DIY

Multi Mount - Sling Mount

di-qd-multi-mount

$24.95

Hence the name, this is a very adaptive sling mount that attaches by 1913 Picatinny Rail. Connection points include: QD on top, Another QD on one side, Small hole on the other side, and the mount itself is slotted for 1inch webbing. Although a down side it must be slid into place on a rail, the more simplistic design also makes it more durable. As most...

View

Out-of-Stock

HARDWARE / DIY

QD Sling Connector

di-qd-sling-con

$18.00

This slide on connector is made to add a QD connection point to a sling, a great option to give a two point sling the option to switch to a single point setup. Currently offered in 1inch slot version. QD swivel is NOT included.-6061 Aluminum, Hardcoat Anodized-Made in the USA

View

Out-of-Stock

HARDWARE / DIY

QD Sling Swivel D Loop

di-qd-swivel-d

$12.95

These are a nice modern take on QD (Quick Detach) Swivels commonly used for weapon slings. Release is performed by pressing the top "button"; this particular swivel button is recessed to be accidental release resistant, however is still easy to release when purposefully pressed. Rather than a classic loop this variant sports a D-ring style loop promoting...

View

HARDWARE / DIY

QD Sling Swivel Oval Loop

di-qd-swivel-oval

$12.95

These are a nice modern take on QD (Quick Detach) Swivels commonly used for weapon slings. Release is performed by pressing the top "button"; this particular swivel button is recessed to be accidental release resistant, however is still easy to release when purposefully pressed. A classic oval loop and currently offered in 1inch and 1.25inch webbing slot...

View

HARDWARE / DIY

70E Elastic Webbing

web-70e

$1.80

A Polyester woven elastic that has a good amount of thickness which can offer more padding compared to lower profile elastics. Similar to nylon products, after cutting it is fairly easy to seal ends with heat like from a flame. Currently sold by the YARD, so 1unit = 1yard. If multiple yards (of 1 color) are purchased it will be one chunk / uncut.

View

HARDWARE / DIY

AB Slinghook 1inch

hard-00107

$3.70

AB brand's offering of Mashhook style hardware for sling attachment. The original intent is to be an alternative hardware option to HK style snap-hooks as sometimes accidental releases can be created with normal sling usage rotation. Rather than a specific spring, the Slinghooks use default material tension to keep closure, practically eliminating...

View

HARDWARE / DIY

AB Metal Loop Rectangle Welded 1inch

hard-00106

$0.55

Simple metal rectangle, slotted for 1inch webbing and welded for strength. Spaced for more thickness with interior space being approx 1-1/8inch (28mm) x 5/16inch (9mm) Berry compliant / made in the USA. 1unit = 1 loop and no other items are included

View

HARDWARE / DIY

AB Metal Loop Oval Welded 1inch

hard-00105

$0.55

Simple metal oval, slotted for 1inch webbing and welded for strength. Spaced for some wiggle room with interior space being approx 1-1/8inch+ (29mm) x .25inch (6mm) Berry compliant / made in the USA. 1unit = 1 loop and no other items are included

View

HARDWARE / DIY

AB Metal D-ring Welded 1inch

hard-00104

$0.55

Simple metal D-rings, slotted for 1inch webbing and welded for strength. Berry compliant / made in the USA. 1unit = 1 d-ring and no other items are included

View

HARDWARE / DIY

MIL-W-5664 Elastic Webbing

web-5664

$1.60

MIL-SPEC MIL-W-5664 Elastic Nylon Woven Webbing, Type II Class ISlim and durable, a good option when need to add a little stretch. Like most nylon webbing, after cutting it is fairly easy to seal ends with heat like from a flame. Currently sold by the YARD, so 1unit = 1yard. If multiple yards (of 1 color) are purchased it will be one chunk / uncut.

View

Out-of-Stock

FIELD SUPPLIES

Tacmed Tramedic Trauma Bandage

tacmed-TR011

$4.50

The Tramedic® Trauma Bandage is a simple, effective pressure dressing designed to treat non-life threatening hemorrhaging. It utilizes an elastic wrap material that can be used to generate pressure and a sterile wound pad that can be placed directly over the injury to aid the control of bleeding. The bandage is flat folded and vacuum-sealed to create a...

View

Out-of-Stock

FIELD SUPPLIES

Tacmed OLAES Modular Bandage

tacmed-OALFP-4

$7.50

The OLAES® Modular Bandage is the newest generation of trauma bandages and is advantageous for all levels of care providers. Packed with features such as 3 meters of gauze, a removable occlusive plastic sheet behind the OLAES® trauma dressing pad, and a pressure cup that can also act as a rigid eye shield, the advanced capabilities of the medical...

View

FIELD SUPPLIES

Tacmed OLAES Hemostatic Bandage

tacmed-85-0024

$48.00

The OLAES® Hemostatic Bandage combines the globally recognized OLAES® Modular Bandage with battle tested HemCon® ChitoGauze® PRO to create the most comprehensive trauma bandage for multiple injury profiles. Both proven life-saving devices are now together in a single, easily accessible package to increase any level of pre-hospital care provider’s...

View

POUCHES / PANELS

First Tactical Trauma Kit

firsttac-180045

$34.99

The First Tactical Trauma Kit is a larger sized pouch with a good dose of interior organization to hold various medical supplies. A double zipper clam-shell style opening makes it easy to full open, and the exterior sports a hi-viz orange with loop area for patch labeling. A pull handle is integrated up top to assist in pulling out of larger bags and...

POUCHES / PANELS

First Tactical 9x10 Hook Backed Pouch

firsttac-180030

$19.99

The 9x10inch version of First Tactical's Hook backed Pouch line, great for organizing packs with loop zones for attachment.These pouches sport standard features of-Clear front panel to see contents-Dual slider zippers-Quick Pull Tab, to assist in quick opening-Loop area on front for patch labeling-Additional color pull cords included for color coding...

POUCHES / PANELS

First Tactical 6x10 Hook Backed Pouch

firsttac-180033

$19.99

The 6x10inch version of First Tactical's Hook backed Pouch line, great for organizing packs with loop zones for attachment.These pouches sport standard features of-Clear front panel to see contents-Dual slider zippers-Quick Pull Tab, to assist in quick opening-Loop area on front for patch labeling-Additional color pull cords included for color coding...

Out-of-Stock

POUCHES / PANELS

First Tactical 9x6 Hook Backed Pouch

firsttac-180034

$16.99

The 9x6inch version of First Tactical's Hook backed Pouch line, great for organizing packs with loop zones for attachment.These pouches sport standard features of-Clear front panel to see contents-Dual slider zippers-Quick Pull Tab, to assist in quick opening-Loop area on front for patch labeling-Additional color pull cords included for color coding...

View

Out-of-Stock

POUCHES / PANELS

First Tactical 6x6 Hook Backed Pouch

firsttac-180032

$16.99

The 6x6inch version of First Tactical's Hook backed Pouch line, great for organizing packs with loop zones for attachment.These pouches sport standard features of-Clear front panel to see contents-Dual slider zippers-Quick Pull Tab, to assist in quick opening-Loop area on front for patch labeling-Additional color pull cords included for color coding...

View

Out-of-Stock

POUCHES / PANELS

First Tactical 6x3 Hook Backed Pouch

firsttac-180031

$14.99

The 6x3inch version of First Tactical's Hook backed Pouch line, great for organizing packs with loop zones for attachment.These pouches sport standard features of-Clear front panel to see contents-Dual slider zippers-Quick Pull Tab, to assist in quick opening-Loop area on front for patch labeling-Additional color pull cords included for color coding...

View

POUCHES / PANELS

BFG Dapper Insert Panel

DAP-INSERT-04

$17.00

Simple stiffened inserts with loop on both sides to accommodate hook-backed pouches and accessories. Great for packs that don't already have loop zones or if want to make pull-out panels for any pack. Offered in 3 sizes: 6"x8"10"x16"13"x19" As with all Blue Force Gear products, this product is made with excellence in the USA and carries a limited...

View

POUCHES / PANELS

MSM Shear Pouch Plus Laminate

pouch-00024

$14.00

NEW Laminate / Laser cut version:Based on our simple shear pouch, we decided why not go ahead and add on elastic loops to allow holding of a tourniquet as well. The loops are a nice snug fit good for holding popular tourniquets such as the CAT and SOF-T. Due to the layout change, the security strap is now VELCRO® Brand ONE-WRAP® based which releases easy...

View

POUCHES / PANELS

Thyrm Cell Vault 5m

thyrm-cv5m

$54.99

The CellVault-5M Modular Battery Storage provides a safe haven for the batteries you rely on the most; high-drain cells that power your critical flashlights & gear. Whether you need CR123’s for a helmet light or NVGs, 18350’s for your pistol, or 18650’s for your rifle, the CellVault-5M can be configured to carry exactly what you need and keep cells...

View

ACCESSORIES

Rhino Hanger

toughhook-0003

$12.99

From the makers of the Tough Hook and Hanger, this Rhino variant is similar to the Tough Hanger, but replaces the lower grip with lower tension clips for more accessory holding options.Tired of finding creative ways to hang your heavy kit to get it off the floor? The Rhino Hanger is the easy fix with additional room for creative functionality. Made to...

View

POUCHES / PANELS

Thyrm Cell Vault 18

thyrm-cv18

$24.99

Premium batteries require protection from physical and environmental damage but need to remain accessible to keep advanced tactical lights running at full power. The CellVault-18 takes attachable 18650 and 18350 battery storage to the next level with new features like side windows that help you verify gear status, a metal locking latch, and waterproof...

View

BLADES

KA-BAR MSM Knife 002 + TapRack Sheath

blade-00004

$95.00

It has been a lot longer than we all wanted, but our collaboration knife with KA-BAR is now available in the 002 variant. Being very similar to the original 001, this 002 variant sports a drop point blade to give more options. The general idea is to have a wide blade with an enhanced thumb ramp and thick enough for plenty of abuse. All kinds of grips are...

View

TACTICAL GEAR

Thyrm VariArc Helmet Mount

thyrm-va001

$29.99

The VariArc™ Helmet Mount: Delivering the direction capability your helmet rail mount should have had Positively locks in the forward index position Directs light through 360 degrees, with 8 additional lower-force index positions Works in vertical positions for umbrella lighting rooms, canopy illumination, and IR strobe signaling Can be used in...

View

On sale!

Out-of-Stock

PACKS / BAGS

MSM Adapt Pack Laser Cut GGG

pack-00005

$100.00

A resupply of our Adapt Pack design in a new laminate laser cut variant! The general design concept to be a lightweight pack that is ready for military use, while being just as handy for hard use civilians. This time a collaboration with Grey Ghost Gear.-Pack is able to be quickly setup ambidextrous for either 2 strap or 1strap modes, extra modular SRB...

View

Out-of-Stock

PACKS / BAGS

MSM Adapt Pack Laser Cut

pack-00004

$155.00

A limited run batch of our Adapt Pack design in a new laminate laser cut variant! The general design concept to be a lightweight pack that is ready for military use, while being just as handy for hard use civilians. Check out the video below for a quick breakdown, made in the USA by Tactical tailor.-Pack is able to be quickly setup ambidextrous for either...

View

Out-of-Stock

HARDWARE / DIY

Kong 751NNN6CNKK Mini D Screw-lock

kong-751nnn6cnkk

$8.00

This carabiner design is for those looking for a smaller EDC size, but is quite the durability upgrade over novelty carabiners. Coming in a shiny black it sports a screw gate for security options and key-nose to prevent snagging.NOT FOR HUMAN LOAD-BEARING however is rated for 600kg made of aluminum. Approx 3.125" x 1.875" with 13mm gate opening Weight:...

View

Out-of-Stock

HARDWARE / DIY

Kong 751NN0400KK Mini D Carabiner

kong-751nn0400kk

$6.00

This carabiner design is for those looking for a smaller EDC size, but is quite the durability upgrade over novelty carabiners. Coming in a matte black it sports a simple straight gate for easy access and key-nose to prevent snagging.NOT FOR HUMAN LOAD-BEARING however is rated for 600kg made of aluminum. Approx 3.125" x 1.875" with 16mm gate opening...

View

Out-of-Stock

HARDWARE / DIY

Keyring 1.125nch ID 1.375inch OD

keyring-1-125in

$0.75

Some simple EDC kit, these are beefy dark grey keyrings. Approx 1.125" inside diameter, 1.375" outside diameter.1unit = 1 keyring and no other items are included

View

Out-of-Stock

HARDWARE / DIY

MSM QASM Vertical Attachment Kit

hard-00103

$7.00

This hardware adapter kit is for those that wish there was a way to mount ITW QASM buckles vertically. A kit comes as a pair including:-2 ITW 810-1076-xxxx – QASM Body/Female, and 2 laser cut laminate pieces.The fit is loose on 1" PALS webbing and snug on laser cut PALS 2" spacing, either setup is secure and requires no sewing. Additionally the QASM parts...

View

HARDWARE / DIY

Austri Alpin Pro Style Cobra Buckle

aa-cobra-ps

$23.50

NEW latest generation PRO STYLE Cobra buckles include changes to prevent only securing one clip instead of both and slots to minimize debris getting in the way of securing the buckle. A new HPC coating is also utilized to offer improved coating durability.AustriAlpin COBRA® quick releases buckles are, without equal, the world's safest, most finely...

View

FIELD SUPPLIES

XShear Trauma Shears 7.5inch

xshear-16T7T-bk

$35.00

If use your trauma shears near everyday or want to step up your shears game these XShear trauma shears were designed from the ground up to greatly enhance the quality level on the classic trauma shears concept. Features include: Hardened stainless steel blades that are twice as thick as most trauma shears, sharpened to a razor edge. BLACK TITANIUM...

View

HARDWARE / DIY

Duraflex Molle Tee Mount

duraflex-9703

$0.50

This is a unique piece made to cause a stop point when connections are dropped into PALS webbing slots. Useful especially if the connected hardware is too large to fit through a PALS slot, the MOLLE Tee can be turned to a side to pass through and then back to the normal position once exposed to secure the mount. Note: Just one raw Molle Tee is included...

View

POUCHES / PANELS

Thyrm DarkVault Critical Gear Case

thyrm-dv001

$59.99

Protect your critical communication & navigation gear from a full spectrum of threats. This case is available in two versions: DarkVault (blocking) and DarkVault-Comms (non-blocking). DarkVault and DarkVault-Comms Cases feature:-Solid, battlefield-grade construction-Gasket seal that keeps out water, dust, and dirt-Quick MOLLE attachment system for...

View

HARDWARE / DIY

AB HK Style SnapHook 1inch slot

hard-00102

$3.75

AB brand USA made take on the HK style 1" slot Snap Hooks: offering cool guy colors and solid quality.

View

Out-of-Stock

HARDWARE / DIY

ITW 3DSR Buckle 1inch

itw-101-3333

$5.99

The 3DSR tactical buckle was made specifically for hard use applications such as Ruck Packs, Slings, and Plate carriers. Core features include: Easy release even while under load 300 pound load capacity Shaped to fit in palm for a consistent squeeze release If overloaded will release before breaking Fragmentation resistant / solid chance of still...

View

Out-of-Stock

POUCHES / PANELS

MSM Practical Results Wallet LaserCut

pouch-00023

$23.00

Based on our original wallet, now done with laminate / laser cut construction to make it even more low profile!As the name implies this wallet is meant to be straight forward and get the job done with all the common wallet tasks that may come your way. Unlike super minimal wallets out there that look cool, but don't hold jack and are cumbersome to...

View

HARDWARE / DIY

A-A-55301 Jacquard Multicam Webbing

web-55301-jac

$2.50

A-A-55301 style Nylon Webbing is similar to MIL-W-17337, commonly used for straps, PALS webbing, and more. It is fairly thin (approx 0.039-0.053 inches), yet offers a great breaking strength being 1000 lbs at 1" wide. Like most nylon webbing, after cutting it is fairly easy to seal ends with heat like from a flame. This particular one is multicam in...

View

HARDWARE / DIY

A-A-55301 Nylon Webbing

web-55301

$1.60

A-A-55301 style Nylon Webbing is similar to MIL-W-17337, commonly used for straps, PALS webbing, and more. It is fairly thin and flexible (approx 0.039-0.053 inches), yet offers a great breaking strength being 1000 lbs at 1" wide. Like most nylon webbing, after cutting it is fairly easy to seal ends with heat like from a flame. Currently sold by the...

View

HARDWARE / DIY

ITW Looploc 1inch

itw-111-0100

$0.25

A simple hardware loop for various webbing interfacing such as adding connections or slack management. 1 unit = 1 LooplocITW Part Number: 111-0100-xxxx

View

HARDWARE / DIY

ITW TriGlide 1.5inch

itw-105-0150

$0.90

The Triglide Strap Adjuster is perfect in any strap or webbing application where variable length is required. It also works well in combination with other buckles as a means of securing loose webbing needs. 1.5inch in particular is common for webbing adjustment on waist belts for packs. 1 unit = 1 Tri-GlideITW Part Number: 105-0150-xxxx

View

HARDWARE / DIY

ITW GT Ruck 1inch Ladderloc

itw-154-2100

$1.00

Hence the ruck part of the name, this is a beefed up version of a ladderlock to give the same functionality while holding up better to harder use. Hole on the pull tab allows for knotting cord for further pull options. 1 unit = 1 GT RuckITW Part Number: 154-2100-xxxx

View

Out-of-Stock

HARDWARE / DIY

ITW GTSR Waveloc Split-Bar 1inch Female

itw-810-1082

$1.00

NOTE: Only the female-body piece is sold on this page. For those tired of their straps slipping through normal buckles on actions such as rucking with speed, the Wavelocs offer a nice strong hold on 1" webbing. These will interface with other ITW and Duraflex 1" male pieces. Being different from the original Waveloc this split-bar version allows for a...

View

Out-of-Stock

HARDWARE / DIY

ITW GTSR Waveloc Split-Bar 1inch Male

itw-810-1083

$1.00

NOTE: Only the male-latch piece is sold on this page. For those tired of their straps slipping through normal buckles on actions such as rucking with speed, the Wavelocs offer a nice strong hold on 1" webbing. These will interface with other ITW and Duraflex 1" female pieces such as repair buckles, surface mounts, and the QASM. Being different from the...

View

HARDWARE / DIY

MIL-W-17337 Nylon Webbing

web-17337

$1.50

MIL-W-17337 style Nylon Webbing has been used in tactical goods for quite some time now, commonly used for straps, PALS webbing, and more. It is fairly thin and flexible (approx 0.038-0.050 inches), yet offers a great breaking strength being 1,200 lbs at 1" wide. Like most nylon webbing, after cutting it is fairly easy to seal ends with heat like from a...

View

POUCHES / PANELS

Agilite Bridge Tactical Helmet Accessory Platform

agilite-8260

$66.95

The Agilite Bridge is a great way to make a tactical helmet go from plain to night ops ready with a solid one-size fits most platform.Features Include:• One Size System-fits all common tactical helmets • Universal rear pod that fits all common Battery Packs/Counterweights • Proprietary rear pod provides impact protection for battery packs. • Exit holes...

View

Maxpedition Entity Hook & Loop Mesh Storage Panel

Out-of-Stock

POUCHES / PANELS

Maxpedition Entity Hook & Loop Mesh Storage Panel

max-NTTPNMGRY

$17.99

A simple Mesh Storage Panel using Maxpedition's very durable, but see-through Gossamer material. Opens with a single zipper, Hook is on the back to mount inside any gear with loop zones.Overall approx: 5"(W) x 7"(H) x 2"(D) 1.3oz

View

Maxpedition Entity Hook & Loop Admin Panel

Out-of-Stock

POUCHES / PANELS

Maxpedition Entity Hook & Loop Admin Panel

max-NTTPNAGRY

$18.99

Another Admin Panel from the Entity series, this one has a layout good for one multitool/medium flashlight sized item and several writing tools. Hook on the back to go inside any gear with loop zones.Overall approx: 5"(W) x 7"(H) 1.3oz

View

Out-of-Stock

FIELD SUPPLIES

MSM EMT Shears TiCN

field-00022

$8.00

Handy EMT / Medical Shears good for cutting about anything, but primarily used for removal of clothing on wounded patients to allow access to injuries. Overall solid in quality, they can do all the classics like cut pennies, this TiCN coated version makes for a very durable coat with smooth action.About 7.5" in total length when measured from furthest...

View

Out-of-Stock

HARDWARE / DIY

ITW GT Waveloc XL 1inch Male

itw-810-1081

$0.75

NOTE: Only the male piece is sold on this page. For those tired of their straps slipping through normal buckles on actions such as rucking with speed, the Wavelocs offer a nice strong hold on 1" webbing. These will interface with other ITW and Duraflex 1" female pieces such as repair buckles, surface mounts, and the QASM. Being different from the original...

View

HARDWARE / DIY

AB G-Hook Wave

hard-00101

$2.25

AB Brand NOTE: These are the middle bar with wave variant to be more slip resistantG-hooks offer compact webbing mods connecting with a simple hook to 1" webbing and offering 1" slots to connect additional webbing. Example attachment points include the sides of tac-vests or up on shoulder straps (packs or vests). Since metal, the G-hooks are very flat...

View

HARDWARE / DIY

AB G-Hook Flat

hard-00100

$2.00

AB Brand NOTE: These are the standard / flat versionG-hooks offer compact webbing mods connecting with a simple hook to 1" webbing and offering 1" slots to connect additional webbing. Example attachment points include the sides of tac-vests or up on shoulder straps (packs or vests). Since metal, the G-hooks are very flat compared to a typical SRB...

View

HARDWARE / DIY

Kong Tango

kong-tango

$27.99

The Kong Tango: A longtime favorite for tactical safety connection. A lot like a caribiner with a great balance of speed and security. Gate will not open until the rear safety is engaged which occurs naturally when gripped. Slot will fit many applications, but flat side works nice with 1" webbing. Approx 5.5" long x 2.75" wide.

View

Product available with different options

HARDWARE / DIY

AB Rounded Oval Slide Dual Slot 1inch

hard-00099

$0.60

A simple, yet handy slide. Can be used as a tri-glide or get creative such as making it interface with other hardware to create modular attachment points. Since flat and has more length than width it can be inserted into hardware loops creating a secure snag.

View

Out-of-Stock

ACCESSORIES

Tough Hanger

toughhook-0002

$14.99

Tired of finding creative ways to hang your heavy kit to get it off the floor? The Tough Hanger by Tough Hook is the easy fix with additional room for creative functionality. Made to hold heavy setups such as battle vests, scuba rigs, or whatever cool guy stuff you want to hang without having to worry about the hook exploding. While the original Tough...

View

Out-of-Stock

FIELD SUPPLIES

Zippo Windproof Lighter

zippo-218

$16.00

Ol' reliable Zippo Lighters, made popular in WWII with soldiers and still popular today for good reason. Comes packaged in a gift box. Currently stocking Matte Black and Matte Green (OD) Genuine Zippo windproof lighter with distinctive Zippo "click" All metal construction; windproof design works virtually anywhere Refillable for a lifetime of use;...

View

Out-of-Stock

FIELD SUPPLIES

Zippo Emergency Fire Kit

zippo-40478-efk

$11.95

Designed to save the day, the Emergency Fire Kit comes through when others turn back. Its compact and high-caliber construction packs enough punch to overpower bleak conditions and fire up your campsite at a moment's notice. FEATURES: Zippo flint spark wheel Includes 5 easy lightweight paraffin wax-coated spark tinder Ignites with spark or flame...

View

Out-of-Stock

FIELD SUPPLIES

Zippo Mag Strike

zippo-40477-ms

$14.95

The Zippo Mag Strike is simple and effective with a robust size to make it easy to grip. The ferrocerium rod and striker deliver a shower of sparks to light your fire wherever and whenever. Its textured grip, solid triangular body and the ultra-sharp blade allow you to strike with more precision and firepower to ignite every adventure. FEATURES:...

View

Out-of-Stock

FIELD SUPPLIES

Zippo Typhoon Match Kit

zippo-40483-tmk

$11.95

This match kit is ready for any adventure. Its heavy-duty construction and sealed strike pad keep the 15 (included) Typhoon Matches protected and in one place, so you can light your fire in even the most severe conditions. Tube itself is a great survival container if not holding just matches.Item includes 1 Match Kit, 15 Typhoon Matches & 3 Strike Pads...

View

HARDWARE / DIY

Multicam Black Loop Sew-On

mmi-loop-sew-4in-mblack

$8.00

Harder to find Multicam Black Loop Fastener. Loop being the fuzzy/loopy side of hook and loop. Sold by the yard, 1 unit = 1 yard, this is the sew on version.Made by MMI textiles / Berry compliant.

View

On sale!
-50%

Out-of-Stock

FIELD SUPPLIES

Thyrm PyroVault

thyrm-pv001

$15.00 $29.99

Up-armor your classic lighter with a sealed enclosure, webbing clip, and sure-grip surfaces. Finally, your favorite lighter can keep up with you wherever you go. PyroVault™ Features: Housing accepts standard Zippo-style lighter inserts including both fluid and butane torch models O-ring seal keeps the elements out and minimizes evaporation...

View

Out-of-Stock

POUCHES / PANELS

Maxpedition Entity Hook & Loop Low Profile Panel

max-NTTPNFGRY

$18.99

The Entity Hook & Loop Low Profile Panel is a flat organizer panel that can be securely attached to any loop surface. Assorted pockets, sleeves, and elastic bands keep objects organized.Overall approx: 5"(W) x 7"(H) 1.3oz

View

Maxpedition Entity Hook & Loop Utility Panel

Out-of-Stock

POUCHES / PANELS

Maxpedition Entity Hook & Loop Utility Panel

max-NTTPNUGRY

$19.99

The Entity Hook & Loop Utility Panel is a low profile organizer panel that can be securely attached to any loop surface. Dual pouches with hook & loop flaps are perfect for securing contents such as handgun magazines and/or flashlights.Overall approx: 5"(W) x 7"(H) x 1.25"(D) 1.8oz

View

HARDWARE / DIY

Halco Luxmed L20 60in Loop

halco-lux-l20-60in-black

$18.60

Need to make a morale patch banner? This Knit Loop Fabric is great for those who need a large area to mount hook-backed patches or accessories. The holding strength is a good balance where will secure hook items, yet isn't overly difficult to remove items either; appropriate for a merchant setup. The width is 60", Sold by the yard, 1 unit = 1 yard, this...

View

POUCHES / PANELS

TT RRPS Modular Zipper Utility Medium

tt-10315

$38.50

Tactical Tailor’s Rapid Repositionable Pouch System (RRPS) serves a variety of needs and will attach to any hook and loop system. Designed to help organize packs, bags, or anything else lined with loop, these pouches can also be fixed onto the seat backs of vehicles to help organize mission essentials no matter where you are going. The RRPS Medium...

View

TT Low Vis Double Stack Pistol Double Mag Pouch

Product available with different options

POUCHES / PANELS

TT Low Vis Double Stack Pistol Double Mag Pouch

tt-22058

$13.75

The Low Vis Double Stack Pistol Double Magazine Pouch will hold two standard double stack pistol magazines with a tough elastic body. The entire back of the pouch is covered with hook fastener to attach directly to gear with loop fields. Made in the USA by Tactical Tailor.Approx: 3" tall x 5" wide

View

Out-of-Stock

PACKS / BAGS

MSM CYOA Loop Pack

pack-00003

$175.00

The CYOA Loop pack name is based on the "Choose Your Own Adventure" books from back in the day and although the design starts with tactical use in mind, the hope is that all kinds of adventurers will find it useful. Starting with our Adapt pack for core design features we wanted to make a larger pack for those who found the Adapt pack to be too small....

View

POUCHES / PANELS

TT Low Vis Double Stack Pistol Single Mag Pouch

tt-22057

$8.25

The Low Vis Double Stack Pistol Single Magazine Pouch will hold one standard double stack pistol magazine with a tough elastic body. The entire back of the pouch is covered with hook fastener to attach directly to gear with loop fields. Made in the USA by Tactical Tailor.Approx: 3" tall x 2.75" wide

View

POUCHES / PANELS

TT Low Vis Double 5.56 Magazine Pouch

tt-22054

$26.55

The Low Vis Double 5.56 Magazine Pouch will hold two 30 round AR style magazines with a tough elastic body and an adjustable bungee retention system that can be easily removed if desired. The entire back of the pouch is covered with hook fastener to attach directly to gear with loop fields. Made in the USA by Tactical Tailor.Approx: 5.5" tall x 7" wide

View

TT RRPS Low Vis Single 5.56 Magazine Pouch

POUCHES / PANELS

TT Low Vis Single 5.56 Magazine Pouch

tt-22053

$16.45

The Low Vis Single 5.56 Magazine Pouch will hold one 30 round AR style magazine with a tough elastic body and an adjustable bungee retention system that can be easily removed if desired. The entire back of the pouch is covered with hook fastener to attach directly to gear with loop fields. Made in the USA by Tactical Tailor.Approx: 5.5" tall x 4" wide

View

POUCHES / PANELS

TT RRPS Slim Line Admin Pouch

tt-10302

$37.50

View

Out-of-Stock

POUCHES / PANELS

TT RRPS Modular Zipper Utility Small

tt-10314

$35.95

View

POUCHES / PANELS

TT RRPS 4-Row Channel Tear Away Panel

tt-10356

$28.75

View

POUCHES / PANELS

TT RRPS 3-Row Channel Tear Away Panel

tt-10355

$28.75

View

Out-of-Stock

POUCHES / PANELS

TT RRPS Accessory Pouch 1V

tt-10351

$20.47

The RRPS Accessory Pouch 1H is a horizontal utility pouch designed to hold your smaller miscellaneous items, such as first aid supplies, small tools, or anything else that you can think of. Features dual zipper pulls and loop on the front for attachment of label or name tapes, or other patches. The back of the pouch is lined with hook for attachment to...

View

POUCHES / PANELS

TT RRPS Accessory Pouch 1H

tt-10350

$20.47

View

Out-of-Stock

POUCHES / PANELS

TT RRPS Large Mesh Pocket

tt-10310

$20.47

View

POUCHES / PANELS

TT RRPS Medium Mesh Pocket

tt-10311

$18.95

View

Out-of-Stock

POUCHES / PANELS

TT RRPS Small Mesh Pocket

tt-10312

$17.43

View

Out-of-Stock

POUCHES / PANELS

Maxpedition Cuboid Medium

max-1803

$20.99

Cuboid organizers are soft containers excellent for travel and ideal for items that don't wrinkle when folded or rolled. Their mesh areas allow viewing of contents. They are spec'd to fit within each other. Two Medium CUBOID will fit into one Large CUBOID. Two small CUBOID will fit into one Medium CUBOID. When not in use, they can be stored within each...

View

Product available with different options

HARDWARE / DIY

Duraflex Every Which Way Buckle Female

duraflex-9395

$1.50

A unique buckle part to allow mounting to PALS / MOLLE webbing both vertically and horizontally. Duraflex offers solid Berry Compliant hardware and these parts can interface with other 1" ITW Military buckle parts too. Note: This product is just for the female part, 1 unit = 1 buckle. Part #9395

View

HARDWARE / DIY

Duraflex Siamese Slik Clip

duraflex-6712

$0.75

Unique snap-on hardware to offer options to attach pouches or straps to gear. Slotted for 1inch webbing it also works well with PALS / MOLLE webbing. Check out the Regular version if you'd like only one side to have a snap opening. 1 unit is 1 clip. Part #6712

View

Showing 1-96 of 264 item(s)