List of products by manufacturer ITW NEXUS

Showing 1 - 25 of 35 items
  • ITW Looploc 1inch
    New
    Available
    ITW Looploc 1inch
    itw-111-0100

    A simple hardware loop for various webbing interfacing such as adding connections or slack management. 1 unit = 1 LooplocITW Part Number: 111-0100-xxxx

    $0.25
  • ITW TriGlide 1.5inch
    New
    Available
    ITW TriGlide 1.5inch
    itw-105-0150

    The Triglide Strap Adjuster is perfect in any strap or webbing application where variable length is required. It also works well in combination with other buckles as a means of securing loose webbing needs. 1.5inch in particular is common for webbing adjustment on waist belts for packs. 1 unit = 1 Tri-GlideITW Part Number: 105-0150-xxxx

    $0.50
  • ITW GT Ruck 1inch Ladderloc
    New
    Available
    ITW GT Ruck 1inch Ladderloc
    itw-154-2100

    Hence the ruck part of the name, this is a beefed up version of a ladderlock to give the same functionality while holding up better to harder use. Hole on the pull tab allows for knotting cord for further pull options. 1 unit = 1 GT RuckITW Part Number: 154-2100-xxxx

    $1.00
  • ITW GTSR Waveloc Split-Bar 1inch Female
    New
    Available
    ITW GTSR Waveloc Split-Bar 1inch Female
    itw-810-1082

    NOTE: Only the female-body piece is sold on this page. For those tired of their straps slipping through normal buckles on actions such as rucking with speed, the Wavelocs offer a nice strong hold on 1" webbing. These will interface with other ITW and Duraflex 1" male pieces. Being different from the original Waveloc this split-bar version allows for a...

    $1.00
  • ITW GTSR Waveloc Split-Bar 1inch Male
    New
    Available
    ITW GTSR Waveloc Split-Bar 1inch Male
    itw-810-1083

    NOTE: Only the male-latch piece is sold on this page. For those tired of their straps slipping through normal buckles on actions such as rucking with speed, the Wavelocs offer a nice strong hold on 1" webbing. These will interface with other ITW and Duraflex 1" female pieces such as repair buckles, surface mounts, and the QASM. Being different from the...

    $1.00
  • ITW GT Waveloc XL 1inch Male
    Available
    ITW GT Waveloc XL 1inch Male
    itw-810-1081

    NOTE: Only the male piece is sold on this page. For those tired of their straps slipping through normal buckles on actions such as rucking with speed, the Wavelocs offer a nice strong hold on 1" webbing. These will interface with other ITW and Duraflex 1" female pieces such as repair buckles, surface mounts, and the QASM. Being different from the original...

    $0.75
  • ITW GTSR SPLIT-BAR LATCH Male 1inch
    Available
    ITW GTSR SPLIT-BAR LATCH Male 1inch
    itw-810-1072

    A handy split-bar buckle part to allow more repair style buckle options. Great for replacing pack hardware and adding buckles to PALS webbing. These parts can interface with other 1" Duraflex Military buckle parts too. Note: This product is just for the male side and fixed slot / non adjustable style.ITW part number: 810-1072-xxxx

    $1.00
  • ITW FastMag 5.56 Gen4
    Available
    ITW FastMag 5.56 Gen4
    itw-fast556g4

    The latest generation of these proven polymer mag pouches: The combination of interior friction pad and outer tension bands keep magazines inside secure yet can be pulled out with a good yank and twist when desired. Placement of tension band or adding an additional one provides further tension options. 2 versions are offered, one with Stabilizer fins for...

    $29.99
  • ITW GTLL 100 Split-Bar 1inch LadderLock
    Out of stock
    ITW GTLL 100 Split-Bar 1inch LadderLoc
    hard-00094

    Based on the original GTLL 100, but with a repair style slot for no-sew repairs. These are solid ladder-locks made with 1" webbing tactical product use in mind. Great for all kinds of quick adjustment applications; slings and backpack straps being a couple of examples. Typically attached on back slot, the front slot then offers one way webbing movement...

    $0.45
  • ITW Bar Button
    Available
    ITW Bar Button
    hard-00081

    Also known as Canadian style buttons, good for all kinds of projects including paracord, gear, and clothing. This product was developed to meet specific requirements for MILSPEC Govt programs and provides superior physical properties versus conventional melamine 4-hole sewn buttons.  The GhillieTEX material not only provides the user with the highest...

    $0.50
  • ITW GTSR 1inch Waveloc Body
    Out of stock
    ITW GTSR 1inch Waveloc Body
    hard-00078

    NOTE: Only the female / body piece is sold on this page. For those tired of their straps slipping through normal buckles on actions such as rucking with speed, the Wavelocs offer a nice strong hold on 1" webbing. These will interface with other ITW 1" male pieces. Due to the tight fit, only a single strip of webbing will fit through the slots so in some...

    $0.75
  • ITW GTLL 1" Ladderloc
    Available
    ITW GTLL 1inch Ladderloc
    hard-00077

    These are solid ladder-locks made with 1" webbing tactical product use in mind. Great for all kinds of quick adjustment applications; slings and backpack straps being a couple of examples. Typically attached on back slot, the front slot then offers one way webbing movement until tilted to offer two way webbing movement. With the lanyard hole one can add a...

    $0.45
  • ITW GT Cobra® Buckle
    Available
    ITW GT Cobra® Buckle
    hard-00066

    ITW Nexus North America is proud to partner with AustriAlpin, the GT Cobra high strength polymer buckle system. Designed to be more robust than any other type of plastic hardware on the market, with a targeted tensile load of 500lbf, the GT Cobra buckle is a 100% Polymer system with no metal components.  A few of the many GT Cobra advantages include its...

    $4.85
  • ITW G-Hook Flat
    Available
    ITW G-Hook Flat
    hard-00065

    NOTE: These are the standard / flat version 09241-22-2188xG-hooks offer compact webbing mods connecting with a simple hook to 1" webbing and offering 1" slots to connect additional webbing. Example attachment points include the sides of tac-vests or up on shoulder straps (packs or vests). Since metal, the G-hooks are very flat compared to a typical SRB...

    $2.25
  • ITW D-Ring
    Available
    ITW D-Ring
    hard-00054

    ITW Nexus D-Ring are perfect wherever a rigid attachment point is required. Unlike metal D-Rings, they won't rust or corrode. 1 unit = 1 D-ringITW Part Number: 110-0100-xxxx 

    $0.35
  • ITW Tri-Glide 1inch
    Available
    ITW Tri-Glide 1inch
    hard-00053

    The Triglide Strap Adjuster is perfect in any strap or webbing application where variable length is required. It also works well in combination with other buckles as a means of securing loose webbing needs. 1 unit = 1 Tri-GlideITW Part Number: 105-0100-xxxx 

    $0.45
  • ITW Picatinny QASM Ramp
    Available
    ITW Picatinny QASM Ramp
    hard-00050

    The Picatinny QASM-RAMP is designed to mount, hold and/or organize any/all of your M1913 Picatinny mountable accessories. Introduce this ultra-modular capability to your kit for unlimited mounting options in any location containing 1” sewn webbing. The new Picatinny QASM-RAMP can be used in numerous scenarios, whether it is mounting your incident camera,...

    $5.00
  • ITW ZipLine Alpha
    Available
    ITW ZipLine Alpha
    hard-00039

    These zipper pulls offer some nice benefits over traditional plastic end tabs. Since a fancy visco-elastic molded rubber-like material it will not absorb fluids. Tensile strength is around 40lbs so plenty enough to stand up to normal use, but will break away if snagged during heavy movement rather than resulting in a bad day. Different sliders will offer...

    $0.75
  • ITW 1" Oval Slide
    Out of stock
    ITW 1" Oval Slide
    hard-00024

    A simple, yet handy slide. Can be used as a tri-glide or get creative such as making it interface with other hardware to create modular attachment points. Since flat and has more length than width it can be inserted into hardware loops creating a secure snag. 

    $0.75
  • ITW Tac-Link
    Out of stock
    ITW Tac-Link
    hard-00023

    These are great for non climbing carabiners. Rated at about 300lbs breaking strength, this is more than enough to secure a weapon, yet is a good spec to break away if heavily snagged to prevent injury. The latch hook has also been removed for general easier usability. The TAC-LINK is a high strength polymer attachment device with GhillieTEX™ IR signature...

    $4.00
  • ITW G-Hook Wave
    Out of stock
    ITW G-Hook Wave
    hard-00022

    NOTE: These are the middle bar with wave variant 19241-22-2188xG-hooks offer compact webbing mods connecting with a simple hook to 1" webbing and offering 1" slots to connect additional webbing. Example attachment points include the sides of tac-vests or up on shoulder straps (packs or vests). Since metal, the G-hooks are very flat compared to a typical...

    $2.50
  • ITW SurfaceMount 1inch
    Available
    ITW SurfaceMount 1inch
    hard-00021

    ITW 1" Surface Mount Buckle consisting of 3 pieces each unit:810-1059-xxxx – Surface Mount Buckle810-1060-xxxx – Surface Mount Base810-1058-xxxx – GTSR-1 maleAnother great SRB option, these Surface Mounts allow the female portion to be attached to fabrics. An example use is on magazine pouches as they enhance ease of use due to the female portion always...

    $1.00
  • ITW Waveloc Male
    Available
    ITW Waveloc Male
    hard-00020

    NOTE: Only the male piece is sold on this page. For those tired of their straps slipping through normal buckles on actions such as rucking with speed, the Wavelocs offer a nice strong hold on 1" webbing. These will interface with other ITW 1" female pieces such as repair buckles, surface mounts, and the QASM. Due to the tight fit, only a single strip of...

    $0.50
  • ITW Tac-Toggle
    Available
    ITW Tac-Toggle
    hard-00019

    A simple piece of hardware that can enhance the pull capability of cordage. 2 holes in the center allow 550 cord size cord to be wrapped or tied as desired. Can be grabbed in numerous ways, but excels when gripped between fingers in a fist. Size is a good balance of grip-ability while not being a large snag hazard.ITW Part Number 743-0200-XXXX  

    $0.65
  • ITW QASM
    Available
    ITW QASM
    hard-00018

    ITW 1" QASM (Quick Attach Surface Mount Buckle) consisting of 2 pieces each unit:810-1076-xxxx – QASM Body810-1058-xxxx – GTSR-1 maleThese are similar in concept to the repair buckles, however lay nice and flat consitently in place for a more low profile end result. Using the splits, no sewing is required and can mount to the majority of 1" webbing types....

    $1.00