HARDWARE / DIY

1
…
8
9
10
…
12

ITW G-Hook Flat

Out-of-Stock

HARDWARE / DIY

ITW G-Hook Flat

NOTE: These are the standard / flat version 09241-22-2188xG-hooks offer compact webbing mods connecting with a simple hook to 1" webbing and offering 1" slots to connect additional webbing. Example attachment points include the sides of tac-vests or up on shoulder straps (packs or vests). Since metal, the G-hooks are very flat compared to a typical SRB...

View

AUSTRIALPIN Cobra® Frame

Out-of-Stock

HARDWARE / DIY

AUSTRIALPIN Cobra® Frame

Based on the AustriAlpin COBRA® buckle styling, these special tri-glides feature extremely high strength (18kN) and low profile design. Made of 7075 grade aluminum alloy with stainless steel adjuster bar. NOTE: AA has been transitioning from annodizing colors to powder coat colors so the coyote color can vary quite a bit, check in with us if you require...

View

MSM QR Keychain Econo

Out-of-Stock

HARDWARE / DIY

MSM QR Keychain Econo

MIL-SPEC MONKEY

The core strap is made of VELCRO® Brand ONE-WRAP® which allows placement of mini patches 2"x1" now using our powder coated snap shackles. Most folks will connect the QR shackle to something like a belt loop, but feel free to get creative connecting to other gear such as vests and packs. Currently made in house at MSM in the USA.-No Patches Included. NOTE:...

View

MSM QR Belt Rig Econo

Out-of-Stock

HARDWARE / DIY

MSM QR Belt Rig Econo

MIL-SPEC MONKEY

Based on our original QR belt rig, this variant uses less expensive parts to give good bang for the buck. We use one of our 2nds snap shackles which doesn't have a super durable coat, but functions great and instead of a g-hook a simple tri-glide is used. Although made with belts in mind, feel free to get creative connecting to other gear such as vests...

View

Out-of-Stock

HARDWARE / DIY

54inch Multicam Loop VELCRO® Brand

Have a special large project like a morale patch banner where only the finest MIL velcro will do? This is full on VELCRO® Brand Loop fuzzy side done in Multicam camouflage with excellent color matching. The width is 54", Sold by the yard, 1 unit = 1 yard, this is the sew on version. If multiple yards are purchased we will assume to pack without...

View

Positive Locking Cord

HARDWARE / DIY

Positive Locking Cord

This Berry Compliant Cord is a similar width to 550 cord, however the rough texture makes it very grippy and hence the name, positive locking. Great for all kinds of lashing and tactical crafts, Just like 550 cord, the ends can be easily burned to seal / finish. Currently sold by the YARD. Thus a 10 unit pack = 10 yards / approx 30 feet.

View

Shock Cord

HARDWARE / DIY

Shock Cord

Berry Compliant Shock Cord Made with Invista IR Compliant nylon yarn. Shock cord works great as an elastic cord, popular on packs and other gear, a very handy DIY resource. Currently sold by the YARD. Thus a 10 unit pack = 10 yards / approx 30 feet.

View

AustriAlpin Cobra Buckle

On sale!
-40%

Out-of-Stock

HARDWARE / DIY

AustriAlpin Cobra® Buckle

$5.94 $9.90

Now sold as half buckles / parts to allow better customization! However one will need to buy both a male AND a female piece to make a complete buckle. (The classic standard is a male adjust and female fixed) AustriAlpin COBRA® quick releases buckles are, without equal, the world's safest, most finely crafted, and strongest load bearing quick release...

View

ITW D-Ring

HARDWARE / DIY

ITW D-Ring

ITW Nexus D-Ring are perfect wherever a rigid attachment point is required. Unlike metal D-Rings, they won't rust or corrode. 1 unit = 1 D-ringITW Part Number: 110-0100-xxxx

View

ITW Tri-Glide 1inch

HARDWARE / DIY

ITW Tri-Glide 1inch

The Triglide Strap Adjuster is perfect in any strap or webbing application where variable length is required. It also works well in combination with other buckles as a means of securing loose webbing needs. 1 unit = 1 Tri-GlideITW Part Number: 105-0100-xxxx

View

HARDWARE / DIY

Adhesive Loop VELCRO® Brand

Sold by the foot, 1 unit = 1 foot. This is full on Military VELCRO® Brand Loop fuzzy side done with adhesive / sticky back - brand #72. Great for helmets, small electronics, weapon furniture, and more. The adhesive achieves full bond strength in 24 hours (after applying on the gear surface), and works well in temperature ranges from -20° F to 225° F.

View

HARDWARE / DIY

VELCRO® ONE-WRAP® Brand 1inch

Sold by the YARD:VELCRO® Brand ONE-WRAP® has many uses, but for gear it really shines offering strap and wire management. A great replacement to where duct-tape was the common choice in the past, with one-wrap being much easier to release and reuse. One side is hook and one is loop, however the hook style is done lower profile so it doesn't accidentally...

View

Showing 97-108 of 143 item(s)

1
…
8
9
10
…
12