HARDWARE / DIY

Specializing in hard-use hardware for upgrading your gear and DIY tactical / EDC projects!

HARDWARE / DIY

Woodland M81 Loop Sew-On MMI

Woodland M61 Loop Fastener. Loop being the fuzzy/loopy side of hook and loop. Sold by the yard, 1 unit = 1 yard, this is the sew on version.Made by MMI textiles / Berry compliant.

View

HARDWARE / DIY

Multicam Loop Sew-On MMI

hard-00108-multic

$5.00

Multicam Loop Fastener. Loop being the fuzzy/loopy side of hook and loop. Sold by the yard, 1 unit = 1 yard, this is the sew on version.Made by MMI textiles / Berry compliant.

View

Out-of-Stock

HARDWARE / DIY

Multi Mount - Sling Mount

di-qd-multi-mount

$24.95

Hence the name, this is a very adaptive sling mount that attaches by 1913 Picatinny Rail. Connection points include: QD on top, Another QD on one side, Small hole on the other side, and the mount itself is slotted for 1inch webbing. Although a down side it must be slid into place on a rail, the more simplistic design also makes it more durable. As most...

View

Out-of-Stock

HARDWARE / DIY

QD Sling Connector

di-qd-sling-con

$18.00

This slide on connector is made to add a QD connection point to a sling, a great option to give a two point sling the option to switch to a single point setup. Currently offered in 1inch slot version. QD swivel is NOT included.-6061 Aluminum, Hardcoat Anodized-Made in the USA

View

HARDWARE / DIY

QD Sling Swivel D Loop

di-qd-swivel-d

$12.95

These are a nice modern take on QD (Quick Detach) Swivels commonly used for weapon slings. Release is performed by pressing the top "button"; this particular swivel button is recessed to be accidental release resistant, however is still easy to release when purposefully pressed. Rather than a classic loop this variant sports a D-ring style loop promoting...

View

HARDWARE / DIY

QD Sling Swivel Oval Loop

di-qd-swivel-oval

$12.95

These are a nice modern take on QD (Quick Detach) Swivels commonly used for weapon slings. Release is performed by pressing the top "button"; this particular swivel button is recessed to be accidental release resistant, however is still easy to release when purposefully pressed. A classic oval loop and currently offered in 1inch and 1.25inch webbing slot...

View

HARDWARE / DIY

70E Elastic Webbing

web-70e

$1.80

A Polyester woven elastic that has a good amount of thickness which can offer more padding compared to lower profile elastics. Similar to nylon products, after cutting it is fairly easy to seal ends with heat like from a flame. Currently sold by the YARD, so 1unit = 1yard. If multiple yards (of 1 color) are purchased it will be one chunk / uncut.

View

HARDWARE / DIY

AB Slinghook 1inch

hard-00107

$3.70

AB brand's offering of Mashhook style hardware for sling attachment. The original intent is to be an alternative hardware option to HK style snap-hooks as sometimes accidental releases can be created with normal sling usage rotation. Rather than a specific spring, the Slinghooks use default material tension to keep closure, practically eliminating...

View

HARDWARE / DIY

AB Metal Loop Rectangle Welded 1inch

hard-00106

$0.55

Simple metal rectangle, slotted for 1inch webbing and welded for strength. Spaced for more thickness with interior space being approx 1-1/8inch (28mm) x 5/16inch (9mm) Berry compliant / made in the USA. 1unit = 1 loop and no other items are included

View

HARDWARE / DIY

AB Metal Loop Oval Welded 1inch

hard-00105

$0.55

Simple metal oval, slotted for 1inch webbing and welded for strength. Spaced for some wiggle room with interior space being approx 1-1/8inch+ (29mm) x .25inch (6mm) Berry compliant / made in the USA. 1unit = 1 loop and no other items are included

View

HARDWARE / DIY

AB Metal D-ring Welded 1inch

hard-00104

$0.55

Simple metal D-rings, slotted for 1inch webbing and welded for strength. Berry compliant / made in the USA. 1unit = 1 d-ring and no other items are included

View

HARDWARE / DIY

MIL-W-5664 Elastic Webbing

web-5664

$1.60

MIL-SPEC MIL-W-5664 Elastic Nylon Woven Webbing, Type II Class ISlim and durable, a good option when need to add a little stretch. Like most nylon webbing, after cutting it is fairly easy to seal ends with heat like from a flame. Currently sold by the YARD, so 1unit = 1yard. If multiple yards (of 1 color) are purchased it will be one chunk / uncut.

View

Out-of-Stock

HARDWARE / DIY

Kong 751NNN6CNKK Mini D Screw-lock

kong-751nnn6cnkk

$8.00

This carabiner design is for those looking for a smaller EDC size, but is quite the durability upgrade over novelty carabiners. Coming in a shiny black it sports a screw gate for security options and key-nose to prevent snagging.NOT FOR HUMAN LOAD-BEARING however is rated for 600kg made of aluminum. Approx 3.125" x 1.875" with 13mm gate opening Weight:...

View

Out-of-Stock

HARDWARE / DIY

Kong 751NN0400KK Mini D Carabiner

kong-751nn0400kk

$6.00

This carabiner design is for those looking for a smaller EDC size, but is quite the durability upgrade over novelty carabiners. Coming in a matte black it sports a simple straight gate for easy access and key-nose to prevent snagging.NOT FOR HUMAN LOAD-BEARING however is rated for 600kg made of aluminum. Approx 3.125" x 1.875" with 16mm gate opening...

View

Out-of-Stock

HARDWARE / DIY

Keyring 1.125nch ID 1.375inch OD

keyring-1-125in

$0.75

Some simple EDC kit, these are beefy dark grey keyrings. Approx 1.125" inside diameter, 1.375" outside diameter.1unit = 1 keyring and no other items are included

View

HARDWARE / DIY

MSM QASM Vertical Attachment Kit

hard-00103

$7.00

This hardware adapter kit is for those that wish there was a way to mount ITW QASM buckles vertically. A kit comes as a pair including:-2 ITW 810-1076-xxxx – QASM Body/Female, and 2 laser cut laminate pieces.The fit is loose on 1" PALS webbing and snug on laser cut PALS 2" spacing, either setup is secure and requires no sewing. Additionally the QASM parts...

View

HARDWARE / DIY

Austri Alpin Pro Style Cobra Buckle

aa-cobra-ps

$23.50

NEW latest generation PRO STYLE Cobra buckles include changes to prevent only securing one clip instead of both and slots to minimize debris getting in the way of securing the buckle. A new HPC coating is also utilized to offer improved coating durability.AustriAlpin COBRA® quick releases buckles are, without equal, the world's safest, most finely...

View

HARDWARE / DIY

Duraflex Molle Tee Mount

duraflex-9703

$0.50

This is a unique piece made to cause a stop point when connections are dropped into PALS webbing slots. Useful especially if the connected hardware is too large to fit through a PALS slot, the MOLLE Tee can be turned to a side to pass through and then back to the normal position once exposed to secure the mount. Note: Just one raw Molle Tee is included...

View

HARDWARE / DIY

AB HK Style SnapHook 1inch slot

hard-00102

$3.75

AB brand USA made take on the HK style 1" slot Snap Hooks: offering cool guy colors and solid quality.

View

Out-of-Stock

HARDWARE / DIY

ITW 3DSR Buckle 1inch

itw-101-3333

$5.99

The 3DSR tactical buckle was made specifically for hard use applications such as Ruck Packs, Slings, and Plate carriers. Core features include: Easy release even while under load 300 pound load capacity Shaped to fit in palm for a consistent squeeze release If overloaded will release before breaking Fragmentation resistant / solid chance of still...

View

HARDWARE / DIY

A-A-55301 Jacquard Multicam Webbing

web-55301-jac

$2.50

A-A-55301 style Nylon Webbing is similar to MIL-W-17337, commonly used for straps, PALS webbing, and more. It is fairly thin (approx 0.039-0.053 inches), yet offers a great breaking strength being 1000 lbs at 1" wide. Like most nylon webbing, after cutting it is fairly easy to seal ends with heat like from a flame. This particular one is multicam in...

View

HARDWARE / DIY

A-A-55301 Nylon Webbing

web-55301

$1.60

A-A-55301 style Nylon Webbing is similar to MIL-W-17337, commonly used for straps, PALS webbing, and more. It is fairly thin and flexible (approx 0.039-0.053 inches), yet offers a great breaking strength being 1000 lbs at 1" wide. Like most nylon webbing, after cutting it is fairly easy to seal ends with heat like from a flame. Currently sold by the...

View

HARDWARE / DIY

ITW Looploc 1inch

itw-111-0100

$0.25

A simple hardware loop for various webbing interfacing such as adding connections or slack management. 1 unit = 1 LooplocITW Part Number: 111-0100-xxxx

View

HARDWARE / DIY

ITW TriGlide 1.5inch

itw-105-0150

$0.50

The Triglide Strap Adjuster is perfect in any strap or webbing application where variable length is required. It also works well in combination with other buckles as a means of securing loose webbing needs. 1.5inch in particular is common for webbing adjustment on waist belts for packs. 1 unit = 1 Tri-GlideITW Part Number: 105-0150-xxxx

View

Showing 1-24 of 120 item(s)