TACTICAL GEAR

There are 246 products.
Showing 1 - 25 of 246 items
  • Thyrm VariArc Helmet Mount
    New
    Available
    Thyrm VariArc Helmet Mount
    thyrm-va001

    The VariArc™ Helmet Mount: Delivering the direction capability your helmet rail mount should have had Positively locks in the forward index position Directs light through 360 degrees, with 8 additional lower-force index positions Works in vertical positions for umbrella lighting rooms, canopy illumination, and IR strobe signaling Can be used in...

    $29.99
  • MSM Adapt Pack Laser Cut GGG
    New
    Available
    MSM Adapt Pack Laser Cut GGG
    pack-00005

    A resupply of our Adapt Pack design in a new laminate laser cut variant! The general design concept to be a lightweight pack that is ready for military use, while being just as handy for hard use civilians. This time a collaboration with Grey Ghost Gear.-Pack is able to be quickly setup ambidextrous for either 2 strap or 1strap modes, extra modular SRB...

    $140.00
  • MSM Adapt Pack Laser Cut
    New
    Out of stock
    MSM Adapt Pack Laser Cut
    pack-00004

    A limited run batch of our Adapt Pack design in a new laminate laser cut variant! The general design concept to be a lightweight pack that is ready for military use, while being just as handy for hard use civilians. Check out the video below for a quick breakdown, made in the USA by Tactical tailor.-Pack is able to be quickly setup ambidextrous for either...

    $140.00
  • Kong 751NNN6CNKK Mini D Screw-lock
    New
    Out of stock
    Kong 751NNN6CNKK Mini D Screw-lock
    kong-751nnn6cnkk

    This carabiner design is for those looking for a smaller EDC size, but is quite the durability upgrade over novelty carabiners. Coming in a shiny black it sports a screw gate for security options and key-nose to prevent snagging.NOT FOR HUMAN LOAD-BEARING however is rated for 600kg made of aluminum. Approx 3.125" x 1.875" with 13mm gate opening Weight: .9oz

    $8.00
  • Kong 751NN0400KK Mini D Carabiner
    kong-751nn0400kk

    This carabiner design is for those looking for a smaller EDC size, but is quite the durability upgrade over novelty carabiners. Coming in a matte black it sports a simple straight gate for easy access and key-nose to prevent snagging.NOT FOR HUMAN LOAD-BEARING however is rated for 600kg made of aluminum. Approx 3.125" x 1.875" with 16mm gate opening...

    $6.00
  • Keyring 1.125nch ID 1.375inch OD
    New
    Product available with different options
    Keyring 1.125nch ID 1.375inch OD
    keyring-1-125in

    Some simple EDC kit, these are beefy dark grey keyrings. Approx 1.125" inside diameter, 1.375" outside diameter.1unit = 1 keyring and no other items are included

    $0.75
  • MSM QASM Vertical Attachment Kit
    New
    Available
    MSM QASM Vertical Attachment Kit
    hard-00102

    This hardware adapter kit is for those that wish there was a way to mount ITW QASM buckles vertically. A kit comes as a pair including:-2 ITW 810-1076-xxxx – QASM Body/Female, and 2 laser cut laminate pieces.The fit is loose on 1" PALS webbing and snug on laser cut PALS 2" spacing, either setup is secure and requires no sewing. Additionally the QASM parts...

    $7.00
  • Austri Alpin Pro Style Cobra Buckle
    New
    Available
    Austri Alpin Pro Style Cobra Buckle
    aa-cobra-ps

    NEW latest generation PRO STYLE Cobra buckles include changes to prevent only securing one clip instead of both and slots to minimize debris getting in the way of securing the buckle. A new HPC coating is also utilized to offer improved coating durability.AustriAlpin COBRA® quick releases buckles are, without equal, the world's safest, most finely...

    $23.50
  • XShear Trauma Shears 7.5inch
    New
    Available
    XShear Trauma Shears 7.5inch
    xshear-16T7T-bk

    If use your trauma shears near everyday or want to step up your shears game these XShear trauma shears were designed from the ground up to greatly enhance the quality level on the classic trauma shears concept. Features include: Hardened stainless steel blades that are twice as thick as most trauma shears, sharpened to a razor edge. BLACK TITANIUM...

    $35.00
  • Duraflex Molle Tee Mount
    New
    Available
    Duraflex Molle Tee Mount
    duraflex-9703

    This is a unique piece made to cause a stop point when connections are dropped into PALS webbing slots. Useful especially if the connected hardware is too large to fit through a PALS slot, the MOLLE Tee can be turned to a side to pass through and then back to the normal position once exposed to secure the mount.  Note: Just one raw Molle Tee is included...

    $0.50
  • Thyrm DarkVault Critical Gear Case
    Available
    Thyrm DarkVault Critical Gear Case
    thyrm-dv001

    Protect your critical communication & navigation gear from a full spectrum of threats. This case is available in two versions: DarkVault (blocking) and DarkVault-Comms (non-blocking). DarkVault and DarkVault-Comms Cases feature:-Solid, battlefield-grade construction-Gasket seal that keeps out water, dust, and dirt-Quick MOLLE attachment system for...

    $59.99
  • AB HK Style SnapHook 1inch slot
    Available
    AB HK Style SnapHook 1inch slot
    hard-00102

    AB brand USA made take on the HK style 1" slot Snap Hooks: offering cool guy colors and solid quality.

    $3.75
  • ITW 3DSR Buckle 1inch
    Available
    ITW 3DSR Buckle 1inch
    itw-101-3333

    The 3DSR tactical buckle was made specifically for hard use applications such as Ruck Packs, Slings, and Plate carriers. Core features include: Easy release even while under load 300 pound load capacity Shaped to fit in palm for a consistent squeeze release If overloaded will release before breaking Fragmentation resistant / solid chance of still...

    $5.99
  • MSM Practical Results Wallet LaserCut
    Available
    MSM Practical Results Wallet LaserCut
    pouch-00023

    Based on our original wallet, now done with laminate / laser cut construction to make it even more low profile!As the name implies this wallet is meant to be straight forward and get the job done with all the common wallet tasks that may come your way. Unlike super minimal wallets out there that look cool, but don't hold jack and are cumbersome to...

    $23.00
  • A-A-55301 Jacquard Multicam Webbing
    Available
    A-A-55301 Jacquard Multicam Webbing
    web-55301-jac

    A-A-55301 style Nylon Webbing is similar to MIL-W-17337, commonly used for straps, PALS webbing, and more.  It is fairly thin (approx 0.039-0.053 inches), yet offers a great breaking strength being 1000 lbs at 1" wide. Like most nylon webbing, after cutting it is fairly easy to seal ends with heat like from a flame. This particular one is multicam in...

    $2.50
  • A-A-55301 Nylon Webbing
    Product available with different options
    A-A-55301 Nylon Webbing
    web-55301

    A-A-55301 style Nylon Webbing is similar to MIL-W-17337, commonly used for straps, PALS webbing, and more.  It is fairly thin and flexible (approx 0.039-0.053 inches), yet offers a great breaking strength being 1000 lbs at 1" wide. Like most nylon webbing, after cutting it is fairly easy to seal ends with heat like from a flame. Currently sold by the...

    $1.60
  • ITW Looploc 1inch
    Available
    ITW Looploc 1inch
    itw-111-0100

    A simple hardware loop for various webbing interfacing such as adding connections or slack management. 1 unit = 1 LooplocITW Part Number: 111-0100-xxxx

    $0.25
  • ITW TriGlide 1.5inch
    Available
    ITW TriGlide 1.5inch
    itw-105-0150

    The Triglide Strap Adjuster is perfect in any strap or webbing application where variable length is required. It also works well in combination with other buckles as a means of securing loose webbing needs. 1.5inch in particular is common for webbing adjustment on waist belts for packs. 1 unit = 1 Tri-GlideITW Part Number: 105-0150-xxxx

    $0.90
  • ITW GT Ruck 1inch Ladderloc
    Out of stock
    ITW GT Ruck 1inch Ladderloc
    itw-154-2100

    Hence the ruck part of the name, this is a beefed up version of a ladderlock to give the same functionality while holding up better to harder use. Hole on the pull tab allows for knotting cord for further pull options. 1 unit = 1 GT RuckITW Part Number: 154-2100-xxxx

    $1.00
  • ITW GTSR Waveloc Split-Bar 1inch Female
    Available
    ITW GTSR Waveloc Split-Bar 1inch Female
    itw-810-1082

    NOTE: Only the female-body piece is sold on this page. For those tired of their straps slipping through normal buckles on actions such as rucking with speed, the Wavelocs offer a nice strong hold on 1" webbing. These will interface with other ITW and Duraflex 1" male pieces. Being different from the original Waveloc this split-bar version allows for a...

    $1.00
  • ITW GTSR Waveloc Split-Bar 1inch Male
    Available
    ITW GTSR Waveloc Split-Bar 1inch Male
    itw-810-1083

    NOTE: Only the male-latch piece is sold on this page. For those tired of their straps slipping through normal buckles on actions such as rucking with speed, the Wavelocs offer a nice strong hold on 1" webbing. These will interface with other ITW and Duraflex 1" female pieces such as repair buckles, surface mounts, and the QASM. Being different from the...

    $1.00
  • MIL-W-17337 Nylon Webbing
    Available
    MIL-W-17337 Nylon Webbing
    web-17337

    MIL-W-17337 style Nylon Webbing has been used in tactical goods for quite some time now, commonly used for straps, PALS webbing, and more.  It is fairly thin and flexible (approx 0.038-0.050 inches), yet offers a great breaking strength being 1,200 lbs at 1" wide. Like most nylon webbing, after cutting it is fairly easy to seal ends with heat like from a...

    $1.50
  • Agilite Bridge Tactical Helmet Accessory Platform
    Out of stock
    Agilite Bridge Tactical Helmet Accessory Platform
    agilite-8260

    The Agilite Bridge is a great way to make a tactical helmet go from plain to night ops ready with a solid one-size fits most platform.Features Include:• One Size System-fits all common tactical helmets • Universal rear pod that fits all common Battery Packs/Counterweights • Proprietary rear pod provides impact protection for battery packs. • Exit holes...

    $66.95
  • Maxpedition Entity Hook & Loop Mesh Storage Panel
    Out of stock
    Maxpedition Entity Hook & Loop Mesh Storage Panel
    max-NTTPNMGRY

    A simple Mesh Storage Panel using Maxpedition's very durable, but see-through Gossamer material. Opens with a single zipper, Hook is on the back to mount inside any gear with loop zones.Overall approx: 5"(W) x 7"(H) x 2"(D)  1.3oz

    $17.99
  • Maxpedition Entity Hook & Loop Admin Panel
    Out of stock
    Maxpedition Entity Hook & Loop Admin Panel
    max-NTTPNAGRY

    Another Admin Panel from the Entity series, this one has a layout good for one multitool/medium flashlight sized item and several writing tools. Hook on the back to go inside any gear with loop zones.Overall approx: 5"(W) x 7"(H)  1.3oz

    $18.99

Filter by:

Manufacturer
Color
Width