HARDWARE / DIY

1
…
4
5
6
…
13

ITW TriGlide 1.5inch

HARDWARE / DIY

ITW TriGlide 1.5inch

The Triglide Strap Adjuster is perfect in any strap or webbing application where variable length is required. It also works well in combination with other buckles as a means of securing loose webbing needs. 1.5inch in particular is common for webbing adjustment on waist belts for packs. 1 unit = 1 Tri-GlideITW Part Number: 105-0150-xxxx

View

ITW GT Ruck 1inch Ladderloc

HARDWARE / DIY

ITW GT Ruck 1inch Ladderloc

Hence the ruck part of the name, this is a beefed up version of a ladderlock to give the same functionality while holding up better to harder use. Hole on the pull tab allows for knotting cord for further pull options. 1 unit = 1 GT RuckITW Part Number: 154-2100-xxxx

View

ITW GTSR Waveloc Split-Bar 1inch Female

Out-of-Stock

HARDWARE / DIY

ITW GTSR Waveloc Split-Bar 1inch Female

NOTE: Only the female-body piece is sold on this page. For those tired of their straps slipping through normal buckles on actions such as rucking with speed, the Wavelocs offer a nice strong hold on 1" webbing. These will interface with other ITW and Duraflex 1" male pieces. Being different from the original Waveloc this split-bar version allows for a...

View

ITW GTSR Waveloc Split-Bar 1inch Male

Out-of-Stock

HARDWARE / DIY

ITW GTSR Waveloc Split-Bar 1inch Male

NOTE: Only the male-latch piece is sold on this page. For those tired of their straps slipping through normal buckles on actions such as rucking with speed, the Wavelocs offer a nice strong hold on 1" webbing. These will interface with other ITW and Duraflex 1" female pieces such as repair buckles, surface mounts, and the QASM. Being different from the...

View

MIL-W-17337 Nylon Webbing

Product available with different options

HARDWARE / DIY

MIL-W-17337 Nylon Webbing

MIL-W-17337 style Nylon Webbing has been used in tactical goods for quite some time now, commonly used for straps, PALS webbing, and more. It is fairly thin and flexible (approx 0.038-0.050 inches), yet offers a great breaking strength being 1,200 lbs at 1" wide. Like most nylon webbing, after cutting it is fairly easy to seal ends with heat like from a...

View

ITW GT Waveloc XL 1inch Male

Out-of-Stock

HARDWARE / DIY

ITW GT Waveloc XL 1inch Male

NOTE: Only the male piece is sold on this page. For those tired of their straps slipping through normal buckles on actions such as rucking with speed, the Wavelocs offer a nice strong hold on 1" webbing. These will interface with other ITW and Duraflex 1" female pieces such as repair buckles, surface mounts, and the QASM. Being different from the original...

View

AB G-Hook Wave

HARDWARE / DIY

AB G-Hook Wave

AB Brand NOTE: These are the middle bar with wave variant to be more slip resistantG-hooks offer compact webbing mods connecting with a simple hook to 1" webbing and offering 1" slots to connect additional webbing. Example attachment points include the sides of tac-vests or up on shoulder straps (packs or vests). Since metal, the G-hooks are very flat...

View

AB G-Hook Flat

Product available with different options

HARDWARE / DIY

AB G-Hook Flat

AB Brand NOTE: These are the standard / flat versionG-hooks offer compact webbing mods connecting with a simple hook to 1" webbing and offering 1" slots to connect additional webbing. Example attachment points include the sides of tac-vests or up on shoulder straps (packs or vests). Since metal, the G-hooks are very flat compared to a typical SRB...

View

Kong Tango

HARDWARE / DIY

Kong Tango

The Kong Tango: A longtime favorite for tactical safety connection. A lot like a caribiner with a great balance of speed and security. Gate will not open until the rear safety is engaged which occurs naturally when gripped. Slot will fit many applications, but flat side works nice with 1" webbing. Approx 5.5" long x 2.75" wide.

View

AB Rounded Oval Slide Dual Slot 1inch

Out-of-Stock

HARDWARE / DIY

AB Rounded Oval Slide Dual Slot 1inch

A simple, yet handy slide. Can be used as a tri-glide or get creative such as making it interface with other hardware to create modular attachment points. Since flat and has more length than width it can be inserted into hardware loops creating a secure snag.

View

Tough Hanger

ACCESSORIES

Tough Hanger

Tired of finding creative ways to hang your heavy kit to get it off the floor? The Tough Hanger by Tough Hook is the easy fix with additional room for creative functionality. Made to hold heavy setups such as battle vests, scuba rigs, or whatever cool guy stuff you want to hang without having to worry about the hook exploding. While the original Tough...

View

Multicam Black Loop Sew-On

Out-of-Stock

HARDWARE / DIY

Multicam Black Loop Sew-On

mmi-loop-sew-4in-mblack

Harder to find Multicam Black Loop Fastener. Loop being the fuzzy/loopy side of hook and loop. Sold by the yard, 1 unit = 1 yard, this is the sew on version.Made by MMI textiles / Berry compliant.

View

Showing 49-60 of 145 item(s)

1
…
4
5
6
…
13