TACTICAL GEAR

1
…
20
21
22
…
24

1.25inch QD Sling Swivel

HARDWARE / DIY

1.25inch QD Sling Swivel

These are great for weapon rail packages, stocks, and accessory mounts that support QD Sling Swivels. Loop itself rotates freely on one axis, however when installing into a mount, user can choose horizontal or vertical mounting rotation (90 degree flexibility). Release is performed by pressing the top "button". Gunmetal Grey color, sized to interface best...

View

1inch QD Sling Swivel

Out-of-Stock

HARDWARE / DIY

1inch QD Sling Swivel

These are great for weapon rail packages, stocks, and accessory mounts that support QD Sling Swivels. Loop itself rotates freely on one axis, however when installing into a mount, user can choose horizontal or vertical mounting rotation (90 degree flexibility). Release is performed by pressing the top "button"; this particular swivel is very accidental...

View

Grenade Rings

HARDWARE / DIY

Grenade Rings

Genuine grenade rings, only used once (ha!), make for great heavy duty keyrings as the thick wire used makes them much more bend resistant compared to typical keyrings. Approx 1" inner diameter and 1.25" outer diameter.For cart clarification 1 unit = 1 ring.

View

Keyring 1inch ID 1.25inch OD

Out-of-Stock

HARDWARE / DIY

Keyring 1inch ID 1.25inch OD

Some simple EDC kit, these are sturdy black keyrings. Approx 1.25" outside diameter, 1" inside diameter. A slightly beefy version of the size most expect a common keyring to be.

View

Keyring 1.25inch ID 1.5inch OD

HARDWARE / DIY

Keyring 1.25inch ID 1.5inch OD

Some simple EDC kit, these are beefy dark grey keyrings. Approx 1.5" outside diameter, 1.25" inside diameter.

View

ITW 1" Oval Slide

Out-of-Stock

HARDWARE / DIY

ITW 1" Oval Slide

A simple, yet handy slide. Can be used as a tri-glide or get creative such as making it interface with other hardware to create modular attachment points. Since flat and has more length than width it can be inserted into hardware loops creating a secure snag.

View

ITW Tac-Link

Out-of-Stock

HARDWARE / DIY

ITW Tac-Link

These are great for non climbing carabiners. Rated at about 300lbs breaking strength, this is more than enough to secure a weapon, yet is a good spec to break away if heavily snagged to prevent injury. The latch hook has also been removed for general easier usability. The TAC-LINK is a high strength polymer attachment device with GhillieTEX™ IR signature...

View

ITW G-Hook Wave

Out-of-Stock

HARDWARE / DIY

ITW G-Hook Wave

NOTE: These are the middle bar with wave variant 19241-22-2188xG-hooks offer compact webbing mods connecting with a simple hook to 1" webbing and offering 1" slots to connect additional webbing. Example attachment points include the sides of tac-vests or up on shoulder straps (packs or vests). Since metal, the G-hooks are very flat compared to a typical...

View

ITW SurfaceMount 1inch

HARDWARE / DIY

ITW SurfaceMount 1inch

ITW 1" Surface Mount Buckle consisting of 3 parts to make 1 unit:810-1059-xxxx – Surface Mount Buckle810-1060-xxxx – Surface Mount Base810-1058-xxxx – GTSR-1 maleAnother great SRB option, these Surface Mounts allow the female portion to be attached to fabrics. An example use is on magazine pouches as they enhance ease of use due to the female portion...

View

ITW Waveloc Male

Out-of-Stock

HARDWARE / DIY

ITW Waveloc Male

NOTE: Only the male piece is sold on this page. For those tired of their straps slipping through normal buckles on actions such as rucking with speed, the Wavelocs offer a nice strong hold on 1" webbing. These will interface with other ITW 1" female pieces such as repair buckles, surface mounts, and the QASM. Due to the tight fit, only a single strip of...

View

ITW Tac-Toggle

HARDWARE / DIY

ITW Tac-Toggle

A simple piece of hardware that can enhance the pull capability of cordage. 2 holes in the center allow 550 cord size cord to be wrapped or tied as desired. Can be grabbed in numerous ways, but excels when gripped between fingers in a fist. Size is a good balance of grip-ability while not being a large snag hazard.ITW Part Number 743-0200-XXXX

View

ITW QASM

HARDWARE / DIY

ITW QASM

ITW 1" QASM (Quick Attach Surface Mount Buckle) consisting of 2 parts to make 1 unit:810-1076-xxxx – QASM Body810-1058-xxxx – GTSR-1 male(The result being 1 complete buckle)These are similar in concept to the repair buckles, however lay nice and flat consistently in place for a more low profile end result. Using the splits, no sewing is required and can...

View

Showing 241-252 of 282 item(s)

1
…
20
21
22
…
24

TACTICAL GEAR