TACTICAL GEAR

FIELD SUPPLIES

MSM Notebook Cover

A minimalist approach to be a cover for classic 3" x 5" notebooks like our RITR ones. Instead of some elaborate pouch you have to unzip to access, our MSM notebook cover allows one to do what all you really need; keep a pen or pencil nearby handy. Made of hypalon for the main material it is super durable and slip resistant. We even added a stash pocket on...

View

Out-of-Stock

HARDWARE / DIY

MSM QR Keychain Econo

MIL-SPEC MONKEY

hard-00063

$8.00

The core strap is made of VELCRO® Brand ONE-WRAP® which allows placement of mini patches 2"x1" now using our powder coated snap shackles. Most folks will connect the QR shackle to something like a belt loop, but feel free to get creative connecting to other gear such as vests and packs. Currently made in house at MSM in the USA.-No Patches Included. NOTE:...

View

Out-of-Stock

HARDWARE / DIY

MSM QR Belt Rig Econo

MIL-SPEC MONKEY

hard-00062

$8.00

Based on our original QR belt rig, this variant uses less expensive parts to give good bang for the buck. We use one of our 2nds snap shackles which doesn't have a super durable coat, but functions great and instead of a g-hook a simple tri-glide is used. Although made with belts in mind, feel free to get creative connecting to other gear such as vests...

View

Out-of-Stock

HARDWARE / DIY

54inch Multicam Loop VELCRO® Brand

Velcro

hard-00061

$65.00

Have a special large project like a morale patch banner where only the finest MIL velcro will do? This is full on VELCRO® Brand Loop fuzzy side done in Multicam camouflage with excellent color matching. The width is 54", Sold by the yard, 1 unit = 1 yard, this is the sew on version. If multiple yards are purchased we will assume to pack without...

View

Out-of-Stock

FIELD SUPPLIES

TK-4L Tourniquet

H&H

field-00012

$12.00

The TK-4L Tourniquet is based on the TK-4 with a hardware upgrade of replacing one end with a tension hook to help allow maximum pressure. Still economical and compact, It can be applied with one hand and can be multipurpose such as used to apply pressure to bandages. Due to the size and overall low cost, these make for great backup and everyday carry...

View

Out-of-Stock

FIELD SUPPLIES

TK-4 Tourniquet

H&H

field-00011

$7.00

The TK-4 Tourniquet is an economical and compact tourniquet composed of simple elastic and steel hooks. It can be applied with one hand and can be multipurpose such as used to apply pressure to bandages. Based on my own experience I highly recommend bending the hooks a little more closed for more reliable rapid application. Due to the size and low cost...

View

HARDWARE / DIY

Positive Locking Cord

hard-00060

$4.50

This Berry Compliant Cord is a similar width to 550 cord, however the rough texture makes it very grippy and hence the name, positive locking. Great for all kinds of lashing and tactical crafts, Just like 550 cord, the ends can be easily burned to seal / finish. Currently sold by the YARD. Thus a 10 unit pack = 10 yards / approx 30 feet.

View

HARDWARE / DIY

Shock Cord

hard-00059

$6.00

Berry Compliant Shock Cord Made with Invista IR Compliant nylon yarn. Shock cord works great as an elastic cord, popular on packs and other gear, a very handy DIY resource. Currently sold by the YARD. Thus a 10 unit pack = 10 yards / approx 30 feet.

View

PACKS / BAGS

MSM Adapt Pack

Tactical Tailor

pack-00001

$156.00

NOTE! Latest 2022 batch includes updates of double slider zippers on front compartment and loop on front side main compartment interior.The MSM Adapt Pack is our first pack design in collaboration with Tactical Tailor. The general design concept to be a lightweight pack that is ready for military use, while being just as handy for hard use civilians....

View

POUCHES / PANELS

MSM Bottle Corset

Tactical Tailor

pouch-00010

$35.00

Since we sell different bottle types we thought a versatile pouch would be appropriate. The MSM Bottle Corset design concept is to be a bottle holder that is very size flexible and built military tough. It can hold 32oz bottles such as the Nalgene while being adjustable down to small 12oz bottles. Being highly customizable, how the cords are routed allows...

View

On sale!
-40%

Out-of-Stock

HARDWARE / DIY

AustriAlpin Cobra® Buckle

Austri Alpin

hard-00058

$5.94 $9.90

Now sold as half buckles / parts to allow better customization! However one will need to buy both a male AND a female piece to make a complete buckle. (The classic standard is a male adjust and female fixed) AustriAlpin COBRA® quick releases buckles are, without equal, the world's safest, most finely crafted, and strongest load bearing quick release...

View

HARDWARE / DIY

ITW D-Ring

ITW NEXUS

hard-00054

$0.35

ITW Nexus D-Ring are perfect wherever a rigid attachment point is required. Unlike metal D-Rings, they won't rust or corrode. 1 unit = 1 D-ringITW Part Number: 110-0100-xxxx

View

HARDWARE / DIY

ITW Tri-Glide 1inch

ITW NEXUS

hard-00053

$0.45

The Triglide Strap Adjuster is perfect in any strap or webbing application where variable length is required. It also works well in combination with other buckles as a means of securing loose webbing needs. 1 unit = 1 Tri-GlideITW Part Number: 105-0100-xxxx

View

HARDWARE / DIY

Adhesive Loop VELCRO® Brand

Velcro

hard-00052

$4.00

Sold by the foot, 1 unit = 1 foot. This is full on Military VELCRO® Brand Loop fuzzy side done with adhesive / sticky back - brand #72. Great for helmets, small electronics, weapon furniture, and more. The adhesive achieves full bond strength in 24 hours (after applying on the gear surface), and works well in temperature ranges from -20° F to 225° F.

View

HARDWARE / DIY

VELCRO® ONE-WRAP® Brand 1inch

Velcro

hard-00051

$2.90

Sold by the YARD:VELCRO® Brand ONE-WRAP® has many uses, but for gear it really shines offering strap and wire management. A great replacement to where duct-tape was the common choice in the past, with one-wrap being much easier to release and reuse. One side is hook and one is loop, however the hook style is done lower profile so it doesn't accidentally...

View

Out-of-Stock

HARDWARE / DIY

ITW Picatinny QASM Ramp

ITW NEXUS

hard-00050

$5.00

The Picatinny QASM-RAMP is designed to mount, hold and/or organize any/all of your M1913 Picatinny mountable accessories. Introduce this ultra-modular capability to your kit for unlimited mounting options in any location containing 1” sewn webbing. The new Picatinny QASM-RAMP can be used in numerous scenarios, whether it is mounting your incident camera,...

View

Out-of-Stock

CLIMBING

Fusion Terminal 8

FusionClimb

hard-00048

$25.00

This aluminum descender has a large inside diameter with ears and belay slots. Large design makes it ideal for fast use in adverse conditions and easier to handle heavy loads. Ears allow user the ability to tie off the rope to use both hands freely. Overall approx 6.8" x 6.7" Width Height Major Weight Weight 6.8" 6.7" 45kn...

View

CLIMBING

MSM Pear-S Carabiner

MIL-SPEC MONKEY

hard-00041

$12.00

With no luck getting a hold of carabiners in good colors we had to take matters into our own hands. These are great Pear / HMS shape S-Screwlock carabiners; Light weight aluminum sporting a classic pin nose for the most strength. The Pear shape offers a large gate opening and can be a belay device using a HMS knot. The screw lock is well knurled for a...

View

HARDWARE / DIY

ITW ZipLine Alpha

ITW NEXUS

hard-00039

$0.75

These zipper pulls offer some nice benefits over traditional plastic end tabs. Since a fancy visco-elastic molded rubber-like material it will not absorb fluids. Tensile strength is around 40lbs so plenty enough to stand up to normal use, but will break away if snagged during heavy movement rather than resulting in a bad day. Different sliders will offer...

View

HARDWARE / DIY

MSM Retracto-Plugs

MIL-SPEC MONKEY

hard-00038

$12.00

Based on the tech used on our DLUX CG hats we are now bringing the same great functionality for helmets. Each pack contains 2 retractors each with a plug, with hook and loop sticky-back fastener circles. The plugs themselves are triple-flange style, 25 db rated, and are also replaceable using a screw mount. Although most users will use hook and loop for...

View

CLIMBING

Safety Snap DA

hard-00037

$20.00

View

Out-of-Stock

HARDWARE / DIY

MSM QR Belt Rig

MIL-SPEC MONKEY

hard-00036

$14.00

A seemingly simple rig made to allow a quick release setup on belts. The G-hook supplies many features including tri-glide functionality, alternate PALS connection, and enhanced grip when threading through both the hook and slots. Which side the pull cord faces can be easily changed by disassembling and flipping over the G-hook. Elastic is included to...

View

HARDWARE / DIY

Para V-ring

hard-00035

$7.50

Commonly used on rigger's belts, this V-ring fits 1.75" webbing, or 1-23/32" if you want to get para-technical. Forged steel and rated as Strength: 4000 lb

View

Out-of-Stock

HARDWARE / DIY

Para Adjuster Bar

hard-00034

$9.25

Commonly used on rigger's belts, this adjuster bar fits 1.75" webbing, or 1-23/32" if you want to get para-technical. Forged steel and rated as Strength: 5000 lb

View

HARDWARE / DIY

1.25inch QD Sling Swivel

hard-00033

$14.00

These are great for weapon rail packages, stocks, and accessory mounts that support QD Sling Swivels. Loop itself rotates freely on one axis, however when installing into a mount, user can choose horizontal or vertical mounting rotation (90 degree flexibility). Release is performed by pressing the top "button". Gunmetal Grey color, sized to interface best...

View

Out-of-Stock

HARDWARE / DIY

1inch QD Sling Swivel

hard-00032

$12.00

View

HARDWARE / DIY

Grenade Rings

hard-00027

$0.75

Genuine grenade rings, only used once (ha!), make for great heavy duty keyrings as the thick wire used makes them much more bend resistant compared to typical keyrings. Approx 1" inner diameter and 1.25" outer diameter.For cart clarification 1 unit = 1 ring.

View

Out-of-Stock

HARDWARE / DIY

Keyring 1inch ID 1.25inch OD

hard-00026

$0.50

Some simple EDC kit, these are sturdy black keyrings. Approx 1.25" outside diameter, 1" inside diameter. A slightly beefy version of the size most expect a common keyring to be.

View

HARDWARE / DIY

Keyring 1.25inch ID 1.5inch OD

hard-00025

$0.80

Some simple EDC kit, these are beefy dark grey keyrings. Approx 1.5" outside diameter, 1.25" inside diameter.

View

Out-of-Stock

HARDWARE / DIY

ITW 1" Oval Slide

ITW NEXUS

hard-00024

$0.75

A simple, yet handy slide. Can be used as a tri-glide or get creative such as making it interface with other hardware to create modular attachment points. Since flat and has more length than width it can be inserted into hardware loops creating a secure snag.

View

Out-of-Stock

HARDWARE / DIY

ITW Tac-Link

ITW NEXUS

hard-00023

$4.00

These are great for non climbing carabiners. Rated at about 300lbs breaking strength, this is more than enough to secure a weapon, yet is a good spec to break away if heavily snagged to prevent injury. The latch hook has also been removed for general easier usability. The TAC-LINK is a high strength polymer attachment device with GhillieTEX™ IR signature...

View

Out-of-Stock

HARDWARE / DIY

ITW G-Hook Wave

ITW NEXUS

hard-00022

$2.50

NOTE: These are the middle bar with wave variant 19241-22-2188xG-hooks offer compact webbing mods connecting with a simple hook to 1" webbing and offering 1" slots to connect additional webbing. Example attachment points include the sides of tac-vests or up on shoulder straps (packs or vests). Since metal, the G-hooks are very flat compared to a typical...

View

HARDWARE / DIY

ITW SurfaceMount 1inch

ITW NEXUS

hard-00021

$1.00

ITW 1" Surface Mount Buckle consisting of 3 parts to make 1 unit:810-1059-xxxx – Surface Mount Buckle810-1060-xxxx – Surface Mount Base810-1058-xxxx – GTSR-1 maleAnother great SRB option, these Surface Mounts allow the female portion to be attached to fabrics. An example use is on magazine pouches as they enhance ease of use due to the female portion...

View

Out-of-Stock

HARDWARE / DIY

ITW Waveloc Male

ITW NEXUS

hard-00020

$0.50

NOTE: Only the male piece is sold on this page. For those tired of their straps slipping through normal buckles on actions such as rucking with speed, the Wavelocs offer a nice strong hold on 1" webbing. These will interface with other ITW 1" female pieces such as repair buckles, surface mounts, and the QASM. Due to the tight fit, only a single strip of...

View

HARDWARE / DIY

ITW Tac-Toggle

ITW NEXUS

hard-00019

$0.65

A simple piece of hardware that can enhance the pull capability of cordage. 2 holes in the center allow 550 cord size cord to be wrapped or tied as desired. Can be grabbed in numerous ways, but excels when gripped between fingers in a fist. Size is a good balance of grip-ability while not being a large snag hazard.ITW Part Number 743-0200-XXXX

View

HARDWARE / DIY

ITW QASM

ITW NEXUS

hard-00018

$1.00

ITW 1" QASM (Quick Attach Surface Mount Buckle) consisting of 2 parts to make 1 unit:810-1076-xxxx – QASM Body810-1058-xxxx – GTSR-1 male(The result being 1 complete buckle)These are similar in concept to the repair buckles, however lay nice and flat consistently in place for a more low profile end result. Using the splits, no sewing is required and can...

View

Showing 217-252 of 282 item(s)