List of products by brand ITW NEXUS

1
2
3

ITW GTLL 1" Ladderloc

HARDWARE / DIY

ITW GTLL 1inch Ladderloc

These are solid ladder-locks made with 1" webbing tactical product use in mind. Great for all kinds of quick adjustment applications; slings and backpack straps being a couple of examples. Typically attached on back slot, the front slot then offers one way webbing movement until tilted to offer two way webbing movement. With the lanyard hole one can add a...

View

ITW GT Cobra® Buckle

HARDWARE / DIY

ITW GT Cobra® Buckle

ITW Nexus North America is proud to partner with AustriAlpin, the GT Cobra high strength polymer buckle system. Designed to be more robust than any other type of plastic hardware on the market, with a targeted tensile load of 500lbf, the GT Cobra buckle is a 100% Polymer system with no metal components. A few of the many GT Cobra advantages include its...

View

ITW G-Hook Flat

Out-of-Stock

HARDWARE / DIY

ITW G-Hook Flat

NOTE: These are the standard / flat version 09241-22-2188xG-hooks offer compact webbing mods connecting with a simple hook to 1" webbing and offering 1" slots to connect additional webbing. Example attachment points include the sides of tac-vests or up on shoulder straps (packs or vests). Since metal, the G-hooks are very flat compared to a typical SRB...

View

ITW D-Ring

HARDWARE / DIY

ITW D-Ring

ITW Nexus D-Ring are perfect wherever a rigid attachment point is required. Unlike metal D-Rings, they won't rust or corrode. 1 unit = 1 D-ringITW Part Number: 110-0100-xxxx

View

ITW Tri-Glide 1inch

HARDWARE / DIY

ITW Tri-Glide 1inch

The Triglide Strap Adjuster is perfect in any strap or webbing application where variable length is required. It also works well in combination with other buckles as a means of securing loose webbing needs. 1 unit = 1 Tri-GlideITW Part Number: 105-0100-xxxx

View

ITW Picatinny QASM Ramp

Out-of-Stock

HARDWARE / DIY

ITW Picatinny QASM Ramp

The Picatinny QASM-RAMP is designed to mount, hold and/or organize any/all of your M1913 Picatinny mountable accessories. Introduce this ultra-modular capability to your kit for unlimited mounting options in any location containing 1” sewn webbing. The new Picatinny QASM-RAMP can be used in numerous scenarios, whether it is mounting your incident camera,...

View

ITW ZipLine Alpha

HARDWARE / DIY

ITW ZipLine Alpha

These zipper pulls offer some nice benefits over traditional plastic end tabs. Since a fancy visco-elastic molded rubber-like material it will not absorb fluids. Tensile strength is around 40lbs so plenty enough to stand up to normal use, but will break away if snagged during heavy movement rather than resulting in a bad day. Different sliders will offer...

View

ITW 1" Oval Slide

Out-of-Stock

HARDWARE / DIY

ITW 1" Oval Slide

A simple, yet handy slide. Can be used as a tri-glide or get creative such as making it interface with other hardware to create modular attachment points. Since flat and has more length than width it can be inserted into hardware loops creating a secure snag.

View

ITW Tac-Link

Out-of-Stock

HARDWARE / DIY

ITW Tac-Link

These are great for non climbing carabiners. Rated at about 300lbs breaking strength, this is more than enough to secure a weapon, yet is a good spec to break away if heavily snagged to prevent injury. The latch hook has also been removed for general easier usability. The TAC-LINK is a high strength polymer attachment device with GhillieTEX™ IR signature...

View

ITW G-Hook Wave

Out-of-Stock

HARDWARE / DIY

ITW G-Hook Wave

NOTE: These are the middle bar with wave variant 19241-22-2188xG-hooks offer compact webbing mods connecting with a simple hook to 1" webbing and offering 1" slots to connect additional webbing. Example attachment points include the sides of tac-vests or up on shoulder straps (packs or vests). Since metal, the G-hooks are very flat compared to a typical...

View

ITW SurfaceMount 1inch

HARDWARE / DIY

ITW SurfaceMount 1inch

ITW 1" Surface Mount Buckle consisting of 3 parts to make 1 unit:810-1059-xxxx – Surface Mount Buckle810-1060-xxxx – Surface Mount Base810-1058-xxxx – GTSR-1 maleAnother great SRB option, these Surface Mounts allow the female portion to be attached to fabrics. An example use is on magazine pouches as they enhance ease of use due to the female portion...

View

ITW Waveloc Male

Out-of-Stock

HARDWARE / DIY

ITW Waveloc Male

NOTE: Only the male piece is sold on this page. For those tired of their straps slipping through normal buckles on actions such as rucking with speed, the Wavelocs offer a nice strong hold on 1" webbing. These will interface with other ITW 1" female pieces such as repair buckles, surface mounts, and the QASM. Due to the tight fit, only a single strip of...

View

Showing 13-24 of 35 item(s)

1
2
3