Snap Shackle Large

Expand

Snap Shackle Large

Brand: MIL-SPEC MONKEY

Some customers wanted a load bearing snap shackle, so here you go in cool guy black to boot. A little bit pricey, but cool hardware for quick release applications. Spring loaded, latch will not release until ring is pulled sideways away from the shackle. Latch can be resecured without pulling ring. 2.625" total length when closed x 1.5" width not counting the pull ring , rated for 1000 pound working load limit. (Working Load Limit) is approximately 20% of average break strength

Unit Pack

1unit
10unit

Reference hard-00006-black-1u

Out-of-Stock

$12.00

Tax excluded

Product Details

10 other products in the same category:

ITW SurfaceMount 1inch

HARDWARE / DIY

ITW SurfaceMount 1inch

ITW 1" Surface Mount Buckle consisting of 3 parts to make 1 unit:810-1059-xxxx – Surface Mount Buckle810-1060-xxxx – Surface Mount Base810-1058-xxxx – GTSR-1 maleAnother great SRB option, these Surface Mounts allow the female portion to be attached to fabrics. An example use is on magazine pouches as they enhance ease of use due to the female portion...

View

ITW GTSR Waveloc Split-Bar 1inch Male

Out-of-Stock

HARDWARE / DIY

ITW GTSR Waveloc Split-Bar 1inch Male

NOTE: Only the male-latch piece is sold on this page. For those tired of their straps slipping through normal buckles on actions such as rucking with speed, the Wavelocs offer a nice strong hold on 1" webbing. These will interface with other ITW and Duraflex 1" female pieces such as repair buckles, surface mounts, and the QASM. Being different from the...

View

550 Cord - Paracord

HARDWARE / DIY

550 Cord - Paracord

7-strand 550 cord, also known as Paracord, 550 refers to the breaking strength. The outter sheath gives the color then smaller white cords are in the interior. Very useful for all kinds of lashing needs, creating pull cords, bracelets, and much more. Ends can be eaily sealed with flame heat. Currently sold by the YARD. Thus a 10 unit pack = 10 yards /...

View

AB G-Hook Wave

Out-of-Stock

HARDWARE / DIY

AB G-Hook Wave

AB Brand NOTE: These are the middle bar with wave variant to be more slip resistantG-hooks offer compact webbing mods connecting with a simple hook to 1" webbing and offering 1" slots to connect additional webbing. Example attachment points include the sides of tac-vests or up on shoulder straps (packs or vests). Since metal, the G-hooks are very flat...

View

ITW Web Dominator

HARDWARE / DIY

ITW Web Dominator

These lil guys are great for any gear with 1" straps that need slack management. Traditionally duct tape is used as semi-permanent solution, but with Web Dominators you can get the holding power with dramatically better on/off speed and no sticky mess to boot. This way the slack can still exist to give sizing options, yet isn't dangling everywhere as a...

View

Fusion Terminal 8

Out-of-Stock

CLIMBING

Fusion Terminal 8

This aluminum descender has a large inside diameter with ears and belay slots. Large design makes it ideal for fast use in adverse conditions and easier to handle heavy loads. Ears allow user the ability to tie off the rope to use both hands freely. Overall approx 6.8" x 6.7" Width Height Major Weight Weight 6.8" 6.7" 45kn...

View

ITW Grimloc

HARDWARE / DIY

ITW Grimloc

ITW Military Products Grimloc (Locking D-ring) ITW Part Number 110-4100-xxxx Originally made to allow Marines to add hydration carriers to their vests, these Grimlocs can be added to anything with PALS / MOLLE style 1" webbing. Once on, they make a great attachment point for weapon slings, lanyards, pouches, and more! The Grimloc™ is fabricated from...

View

Duraflex Snap On Male Buckle 1inch

HARDWARE / DIY

Duraflex Snap On Male Buckle 1inch

National Molding - Duraflex

A handy snap-on buckle part to allow more repair style buckle options. Great for replacing pack hardware and adding buckles to PALS webbing. Duraflex offers solid Berry Compliant hardware and these parts can interface with other 1" ITW Military buckle parts too. Note: This product is just for the male side and fixed slot / non adjustable style. Part #9739

View

ITW Tri-Glide 1inch

Product available with different options

HARDWARE / DIY

ITW Tri-Glide 1inch

The Triglide Strap Adjuster is perfect in any strap or webbing application where variable length is required. It also works well in combination with other buckles as a means of securing loose webbing needs. 1 unit = 1 Tri-GlideITW Part Number: 105-0100-xxxx

View

Multi Mount - Sling Mount

New

HARDWARE / DIY

Multi Mount - Sling Mount

di-qd-multi-mount

Hence the name, this is a very adaptive sling mount that attaches by 1913 Picatinny Rail. Connection points include: QD on top, Another QD on one side, Small hole on the other side, and the mount itself is slotted for 1inch webbing. Although a down side it must be slid into place on a rail, the more simplistic design also makes it more durable. As most...

View