Expand

Maxpedition PZL Positive Grip Zipper Pulls - Large

Name: Maxpedition PZL Positive Grip Zipper Pulls - Large
Brand: Maxpedition
SKU: max-PZL
Price: 10.99 USD
Availability: InStock

Brand: Maxpedition

The PZL Positive Grip Zipper Pull (Large) are easy to use and require only a one finger pull action. They are shaped and textured for enhanced retention, and easy to grab with gloves.
SOLD IN PACK OF 6.

Color

Black
Tan
Grey

Reference max-PZLBLK-black

In stock 5 Items

$10.99

Tax excluded

Product Details

10 other products in the same category:

HARDWARE / DIY

ITW Picatinny QASM Ramp

ITW NEXUS

hard-00050

$5.00

The Picatinny QASM-RAMP is designed to mount, hold and/or organize any/all of your M1913 Picatinny mountable accessories. Introduce this ultra-modular capability to your kit for unlimited mounting options in any location containing 1” sewn webbing. The new Picatinny QASM-RAMP can be used in numerous scenarios, whether it is mounting your incident camera,...

View

HARDWARE / DIY

Grenade Rings

hard-00027

$0.75

Genuine grenade rings, only used once (ha!), make for great heavy duty keyrings as the thick wire used makes them much more bend resistant compared to typical keyrings. Approx 1" inner diameter and 1.25" outer diameter.For cart clarification 1 unit = 1 ring.

View

Out-of-Stock

HARDWARE / DIY

ITW GT Ruck 1inch Ladderloc

ITW NEXUS

itw-154-2100

$1.00

Hence the ruck part of the name, this is a beefed up version of a ladderlock to give the same functionality while holding up better to harder use. Hole on the pull tab allows for knotting cord for further pull options. 1 unit = 1 GT RuckITW Part Number: 154-2100-xxxx

View

HARDWARE / DIY

A-A-55301 Nylon Webbing

web-55301

$1.60

A-A-55301 style Nylon Webbing is similar to MIL-W-17337, commonly used for straps, PALS webbing, and more. It is fairly thin and flexible (approx 0.039-0.053 inches), yet offers a great breaking strength being 1000 lbs at 1" wide. Like most nylon webbing, after cutting it is fairly easy to seal ends with heat like from a flame. Currently sold by the...

View

HARDWARE / DIY

Multi Mount - Sling Mount

di-qd-multi-mount

$24.95

Hence the name, this is a very adaptive sling mount that attaches by 1913 Picatinny Rail. Connection points include: QD on top, Another QD on one side, Small hole on the other side, and the mount itself is slotted for 1inch webbing. Although a down side it must be slid into place on a rail, the more simplistic design also makes it more durable. As most...

View

HARDWARE / DIY

1.25inch QD Sling Swivel

hard-00033

$14.00

These are great for weapon rail packages, stocks, and accessory mounts that support QD Sling Swivels. Loop itself rotates freely on one axis, however when installing into a mount, user can choose horizontal or vertical mounting rotation (90 degree flexibility). Release is performed by pressing the top "button". Gunmetal Grey color, sized to interface best...

View

Out-of-Stock

HARDWARE / DIY

MSM QR Belt Rig Econo

MIL-SPEC MONKEY

hard-00062

$8.00

Based on our original QR belt rig, this variant uses less expensive parts to give good bang for the buck. We use one of our 2nds snap shackles which doesn't have a super durable coat, but functions great and instead of a g-hook a simple tri-glide is used. Although made with belts in mind, feel free to get creative connecting to other gear such as vests...

View

CLIMBING

Safety Snap DA

hard-00037

$20.00

View

HARDWARE / DIY

Halco Luxmed L20 60in Loop

Halco

halco-lux-l20-60in-black

$18.60

Need to make a morale patch banner? This Knit Loop Fabric is great for those who need a large area to mount hook-backed patches or accessories. The holding strength is a good balance where will secure hook items, yet isn't overly difficult to remove items either; appropriate for a merchant setup. The width is 60", Sold by the yard, 1 unit = 1 yard, this...

View

HARDWARE / DIY

Kong Frog

Kong

hard-00016

$20.00

These are a pretty cool unique high speed connector hardware piece. The size works great for climbing type rope or connecting to hardware such as D-rings on Rigger's Belts. To operate, just push the side tabs in and the front will be ready for insertion. Connecting will cause the system to auto close. To release, gently pull away while pushing in the side...

View