WEAR GEAR

MAXPEDITION - Active Shooter Bag - Mag Front and PALS Front

Details

Category: Packs/Bags

Created: Sunday, 09 August 2009 22:08

DIMS: Frontal compartment: 9" x 8" x 1.5" velcro-lined, rain cover dual zips
Main compartment: 9" x 9" x 3" velcro-lined, rain cover dual zips

With the active shooter concept in mind, the bags make for good grab and go reaction capabilities. Starting with a simple shoulder bag core, what makes these bags stand out is the customizability. The interiors of both compartments are fully lined with loop velcro to accept tactical holding accessories such as pistols and mag holsters. One can fit a serious load of ammo or tactical tools inside.

Read more ...

MAXPEDITION - Tear Away Map Case with GPS/Compass/Strobe Pouch

Details

Category: Pouches

Created: Sunday, 09 August 2009 22:07

DIMS: Overall size: 7" wide x 4" high x 1.5" thick
Map case: Opens to 12" x 12"; folded dims 5" x 5" x 1"
GPS/Compass/Strobe pouch: 2.25" wide x 1.25" thick; height adj. 4-5"
Map case comes with one 12x12 a LOKSAK dry bag included

This pouch kit clearly was made with the serious navigator in mind. The main aspect is the map case which is held in by an adjustable SRB. When ready for use the map portion can be torn off the velcro and unfolded to a no joke 12" x 12" size. This allows a lot of map to be viewed at one time. A single zipper allows map access and for those who plan on getting wet on their adventures, a LOKSAK dry bag is even included.

Read more ...

MAXPEDITION - Clip-On PDA Phone Holster

Details

Category: Pouches

Created: Sunday, 09 August 2009 22:07

DIMS: Overall size: 2.75" wide; height adjustable between 4.5" to 5.5"

So you might be thinking, "How the hell is this any different than the Phone Clip-On Series", and I'd have to say not much except the sizing and full coverage flap. The sizing is made to fit the popular iphone while being able to hold many others of similar size due to the elastic webbing and adjustable SRB. The flap comes over the top to give enhanced protection in which the inside still has a nice soft material.

Read more ...

MAXPEDITION - Double M4 Mag Pouch and Double Stack

Details

Category: Pouches

Created: Sunday, 09 August 2009 22:06

DIMS Empty: Single - 7.25" H x 3.5" W x 1.75" D
Double - 7.25" H x 6.75" W x 1.75" D

If looking for a nice flap based rifle mag pouch these give solid holding options. Originally made to fit 2, 30 round NATO (M4) magazines the flap is long enough to accommodate other options such as: (2) AK-74 30-rnd magazines, (1) AK-47 30-rnd magazine with lid cover, or (2) with lid tucked. Since elastic is around the middle it can hold just 1 magazine without rattling issues as well. If it comes down to it, one can even ram a full size pistol inside.

Read more ...

MAXPEDITION - Padded Pouches - 4.5" x 6" and 6" x 6"

Details

Category: Pouches

Created: Sunday, 09 August 2009 22:05

These GP style pouches offer a solid padded option for those who need to carry more delicate objects such as electronics. With both sizes having about 3" depth, a decent sized object can fit inside such as a camcorder with accessories. The main opening double zippers are done reversed style and work nice and smooth. They go down to near the bottom to create a good sized opening and webbing tabs are also on the end for zipper pull points or attach points.

Read more ...

MAXPEDITION - Strobe / GPS / Compass Pouch

Details

Category: Pouches

Created: Sunday, 09 August 2009 22:02

DIMS: Internal dims 2.25” W x 1.25” D; height adjustable between 4” to 5”

This lil pouch is simple, but fills one of those many tactical item needs. Hence the long name it will hold a good assortment of small gadgetry which includes:
- MS-2000 and SDU-5E military strobes
- Garmin Etrex and other small handheld GPS’s
- Lensatic compass or similar

Read more ...

SIERRA 313 - Modular Chest Rig

Details

Category: Vests / Platforms

Created: Thursday, 06 August 2009 21:24

More treats from ze Germans offer up another variant of the popular modular chest rig design. PALS sizing is a solid 18 channels x 3 rows, but it should be noted the channel spacing is out of spec and closer to 1.25" wide rather than 1.5". I'll guess this is due to SIERRA 313 using MALICE clips for all PALS attaching so less room is needed. For those with tradition Natick snap pouches you likely will need to use tools to mount as the snaps are bulkier.

Read more ...

SIERRA 313 - G36 Double Mag Pouch

Details

Category: Pouches

Created: Wednesday, 05 August 2009 03:18

DIMS: 3.75" x 7.5" x 3"

For those into simple designs this is a regulation style mag pouch for ze Germans. The connection points of two G36 mags require the need for all of the 3 inches of depth you see in this pouch. NATO mag users can take advantage of this aspect and can ram in 3 magazines easy. To keep out debris the flap is a full cover style which is nice for protection. The front and back sides of the interior have plastic stiffener to keep proper shape and add durability. To mount, the back has PALS webbing setup to interface with long MALICE clips. Making it unique to most of us SRB whores, the main security hardware is a "Spanish" style clip. It is hard to explain so be sure and view the pics. The Spanish style works quite well as a quick release only requiring one motion of pulling the webbing slack. The down side would be the Spanish style isn't as easy as other methods to resecure. No elastic is on the sides, so keep this in mind when placing 2 NATO mags inside that won't fully fill the pouch. All the materials are mil spec making this pouch feel nice and heavy duty.

www.sierra-313.de/shop

MAXPEDITION - Tear Away Panel

Details

Category: Pouches

Created: Wednesday, 05 August 2009 03:14

If you have an old medic or demo pouch you wish was tear-away capable, then this panel is for you. The foundation is simple mostly consisting of a PALS webbing party and velcro. 5" TacTies or similar connection systems can be used to attach, however keep in mind shorter ones are fine to use for the pouch connection as well. Just in case you are still confused the idea is to attach the non-handle side to a platform such as a vest or pack. The pouch is then mounted to the panel piece with the handle and they connect with hook and loop. To further secure, a strap with an SRB is also supplied. As a small note, mine came in an odd configuration and I had to move the strap around to get it as shown. So come business time you can release the SRB and literally tear off the pouch. Functionality wise you will need to keep an eye on the strap and SRB while doing a quick tear as it can hang up on the handle. A possible improvement might be to widen up the handle sew down points to make for a larger pass through hole. A great example of a use for this panel would be putting it on the Maxpedition Merlin, yet is great for anything you need to with tear off capability.

www.maxpedition.com

MAXPEDITION - Surgical Gloves Pouch

Details

Category: Pouches

Created: Wednesday, 05 August 2009 03:12

This lil pouch is no thrills, but will hold surgical gloves as promised like a champion. The main flap pull tab points up for easy opening. On the back is a set of PALS webbing to accept 3" TacTies or similar connection systems. On the inside are 2 main sleeve pockets for gloves and each of these pockets have a slim divider inside for separation options. The pouch can easily hold 4 pairs of gloves, but more can be rammed in if packed carefully.

www.maxpedition.com