CLIMBING

Kong Oval ALU Straight Naked

New

HARDWARE / DIY

Kong Oval ALU Straight Naked

kong-710nn0400kk

These oval shape carabiners are a useful symmetrical shape featuring a no snag key nose that are handy for many applications. This version is a simple straight gate and lightweight aluminum so easy to use, additionally coming in classic shiny black. On that note this is a special run as "naked" meaning the extra carabiner text is left off that can be...

Kong Tango

HARDWARE / DIY

Kong Tango

The Kong Tango: A longtime favorite for tactical safety connection. A lot like a caribiner with a great balance of speed and security. Gate will not open until the rear safety is engaged which occurs naturally when gripped. Slot will fit many applications, but flat side works nice with 1" webbing. Approx 5.5" long x 2.75" wide.

View

Kong Frog - OEM

HARDWARE / DIY

Kong Frog - OEM

Kong doesn't offer the Frog Express version quite like they used to, but we were able to get a batch of OEM versions. This Frog variant has no markings, yet is mostly black, and uses the screw bolt in the back. The webbing slot size is more for .75", but one can still ram 1" tubular webbing in there just fine. For those concerned about the super plain...

View

MSM Mini Mod-D Carabiner MkII

Out-of-Stock

HARDWARE / DIY

MSM Mini Mod-D Carabiner MkII

Our first batch did well and now we bring you with MKII with low snag keynose style!: Overall approx 3.5" x 2" these make for great EDC and backup carabiners. The smaller size cuts down on bulk being better for holding other objects like sets of keys while at the same time these are real deal load bearing capable carabiners if you end up having to do some...

View

Fusion Terminal 8

Out-of-Stock

CLIMBING

Fusion Terminal 8

This aluminum descender has a large inside diameter with ears and belay slots. Large design makes it ideal for fast use in adverse conditions and easier to handle heavy loads. Ears allow user the ability to tie off the rope to use both hands freely. Overall approx 6.8" x 6.7" Width Height Major Weight Weight 6.8" 6.7" 45kn...

View

MSM Pear-S Carabiner

CLIMBING

MSM Pear-S Carabiner

MIL-SPEC MONKEY

With no luck getting a hold of carabiners in good colors we had to take matters into our own hands. These are great Pear / HMS shape S-Screwlock carabiners; Light weight aluminum sporting a classic pin nose for the most strength. The Pear shape offers a large gate opening and can be a belay device using a HMS knot. The screw lock is well knurled for a...

View

Safety Snap DA

CLIMBING

Safety Snap DA

Very similar to the Kong Tango with the improvement of a bottom guard to shield the rear safety from being jammed up from foreign objects. A lot like a caribiner with a great balance of speed and security. Gate will not open until the rear safety is engaged which occurs naturally when gripped. Approx 5.5" long x 2.75" wide.

View

Kong Frog

Out-of-Stock

HARDWARE / DIY

Kong Frog

These are a pretty cool unique high speed connector hardware piece. The size works great for climbing type rope or connecting to hardware such as D-rings on Rigger's Belts. To operate, just push the side tabs in and the front will be ready for insertion. Connecting will cause the system to auto close. To release, gently pull away while pushing in the side...

View

Showing 1-8 of 8 item(s)