List of products by brand ITW NEXUS

1
2
3

ITW 3DSR Buckle 1inch

Out-of-Stock

HARDWARE / DIY

ITW 3DSR Buckle 1inch

The 3DSR tactical buckle was made specifically for hard use applications such as Ruck Packs, Slings, and Plate carriers. Core features include: Easy release even while under load 300 pound load capacity Shaped to fit in palm for a consistent squeeze release If overloaded will release before breaking Fragmentation resistant / solid chance of still...

View

ITW Looploc 1inch

HARDWARE / DIY

ITW Looploc 1inch

A simple hardware loop for various webbing interfacing such as adding connections or slack management. 1 unit = 1 LooplocITW Part Number: 111-0100-xxxx

View

ITW TriGlide 1.5inch

HARDWARE / DIY

ITW TriGlide 1.5inch

The Triglide Strap Adjuster is perfect in any strap or webbing application where variable length is required. It also works well in combination with other buckles as a means of securing loose webbing needs. 1.5inch in particular is common for webbing adjustment on waist belts for packs. 1 unit = 1 Tri-GlideITW Part Number: 105-0150-xxxx

View

ITW GT Ruck 1inch Ladderloc

HARDWARE / DIY

ITW GT Ruck 1inch Ladderloc

Hence the ruck part of the name, this is a beefed up version of a ladderlock to give the same functionality while holding up better to harder use. Hole on the pull tab allows for knotting cord for further pull options. 1 unit = 1 GT RuckITW Part Number: 154-2100-xxxx

View

ITW GTSR Waveloc Split-Bar 1inch Female

Out-of-Stock

HARDWARE / DIY

ITW GTSR Waveloc Split-Bar 1inch Female

NOTE: Only the female-body piece is sold on this page. For those tired of their straps slipping through normal buckles on actions such as rucking with speed, the Wavelocs offer a nice strong hold on 1" webbing. These will interface with other ITW and Duraflex 1" male pieces. Being different from the original Waveloc this split-bar version allows for a...

View

ITW GTSR Waveloc Split-Bar 1inch Male

Out-of-Stock

HARDWARE / DIY

ITW GTSR Waveloc Split-Bar 1inch Male

NOTE: Only the male-latch piece is sold on this page. For those tired of their straps slipping through normal buckles on actions such as rucking with speed, the Wavelocs offer a nice strong hold on 1" webbing. These will interface with other ITW and Duraflex 1" female pieces such as repair buckles, surface mounts, and the QASM. Being different from the...

View

ITW GT Waveloc XL 1inch Male

Out-of-Stock

HARDWARE / DIY

ITW GT Waveloc XL 1inch Male

NOTE: Only the male piece is sold on this page. For those tired of their straps slipping through normal buckles on actions such as rucking with speed, the Wavelocs offer a nice strong hold on 1" webbing. These will interface with other ITW and Duraflex 1" female pieces such as repair buckles, surface mounts, and the QASM. Being different from the original...

View

ITW GTSR SPLIT-BAR LATCH Male 1inch

Product available with different options

HARDWARE / DIY

ITW GTSR SPLIT-BAR LATCH Male 1inch

A handy split-bar buckle part to allow more repair style buckle options. Great for replacing pack hardware and adding buckles to PALS webbing. These parts can interface with other 1" Duraflex Military buckle parts too. Note: This product is just for the male side and fixed slot / non adjustable style.ITW part number: 810-1072-xxxx

View

ITW FastMag 5.56 Gen4

POUCHES / PANELS

ITW FastMag 5.56 Gen4

The latest generation of these proven polymer mag pouches: The combination of interior friction pad and outer tension bands keep magazines inside secure yet can be pulled out with a good yank and twist when desired. Placement of tension band or adding an additional one provides further tension options. 2 versions are offered, one with Stabilizer fins for...

View

ITW GTLL 100 Split-Bar 1inch LadderLock

Out-of-Stock

HARDWARE / DIY

ITW GTLL 100 Split-Bar 1inch LadderLoc

Based on the original GTLL 100, but with a repair style slot for no-sew repairs. These are solid ladder-locks made with 1" webbing tactical product use in mind. Great for all kinds of quick adjustment applications; slings and backpack straps being a couple of examples. Typically attached on back slot, the front slot then offers one way webbing movement...

View

ITW Bar Button

Out-of-Stock

HARDWARE / DIY

ITW Bar Button

Also known as Canadian style buttons, good for all kinds of projects including paracord, gear, and clothing. This product was developed to meet specific requirements for MILSPEC Govt programs and provides superior physical properties versus conventional melamine 4-hole sewn buttons. The GhillieTEX material not only provides the user with the highest...

View

ITW GTSR 1inch Waveloc Body

Out-of-Stock

HARDWARE / DIY

ITW GTSR 1inch Waveloc Body

NOTE: Only the female / body piece is sold on this page. For those tired of their straps slipping through normal buckles on actions such as rucking with speed, the Wavelocs offer a nice strong hold on 1" webbing. These will interface with other ITW 1" male pieces. Due to the tight fit, only a single strip of webbing will fit through the slots so in some...

View

Showing 1-12 of 35 item(s)

1
2
3