HARDWARE / DIY

This carabiner design is for those looking for a smaller EDC size, but is quite the durability upgrade over novelty carabiners. Coming in a shiny black it sports a screw gate for security options and key-nose to prevent snagging.NOT FOR HUMAN LOAD-BEARING however is rated for 600kg made of aluminum. Approx 3.125" x 1.875" with 13mm gate opening Weight:...

kong-751nnn6cnkk

$8.00

HARDWARE / DIY

Kong 751NN0400KK Mini D Carabiner

This carabiner design is for those looking for a smaller EDC size, but is quite the durability upgrade over novelty carabiners. Coming in a matte black it sports a simple straight gate for easy access and key-nose to prevent snagging.NOT FOR HUMAN LOAD-BEARING however is rated for 600kg made of aluminum. Approx 3.125" x 1.875" with 16mm gate opening...

kong-751nn0400kk

$6.00

Out-of-Stock

HARDWARE / DIY

Keyring 1.125nch ID 1.375inch OD

keyring-1-125in

$0.75

Some simple EDC kit, these are beefy dark grey keyrings. Approx 1.125" inside diameter, 1.375" outside diameter.1unit = 1 keyring and no other items are included

View

HARDWARE / DIY

MSM QASM Vertical Attachment Kit

Tactical Tailor

hard-00103

$8.00

This hardware adapter kit is for those that wish there was a way to mount ITW QASM buckles vertically. A kit comes as a pair including:-2 ITW 810-1076-xxxx – QASM Body/Female, and 2 laser cut laminate pieces.The fit is loose on 1" PALS webbing and snug on laser cut PALS 2" spacing, either setup is secure and requires no sewing. Additionally the QASM parts...

View

HARDWARE / DIY

Austri Alpin Pro Style Cobra Buckle

NEW latest generation PRO STYLE Cobra buckles include changes to prevent only securing one clip instead of both and slots to minimize debris getting in the way of securing the buckle. A new HPC coating is also utilized to offer improved coating durability.AustriAlpin COBRA® quick releases buckles are, without equal, the world's safest, most finely...

aa-cobra-ps

$23.50

View

HARDWARE / DIY

Duraflex Molle Tee Mount

This is a unique piece made to cause a stop point when connections are dropped into PALS webbing slots. Useful especially if the connected hardware is too large to fit through a PALS slot, the MOLLE Tee can be turned to a side to pass through and then back to the normal position once exposed to secure the mount. Note: Just one raw Molle Tee is included...

duraflex-9703

$0.50

View

Out-of-Stock

HARDWARE / DIY

AB HK Style SnapHook 1inch slot

hard-00102

$3.75

AB brand USA made take on the HK style 1" slot Snap Hooks: offering cool guy colors and solid quality.

View

Out-of-Stock

HARDWARE / DIY

ITW 3DSR Buckle 1inch

The 3DSR tactical buckle was made specifically for hard use applications such as Ruck Packs, Slings, and Plate carriers. Core features include: Easy release even while under load 300 pound load capacity Shaped to fit in palm for a consistent squeeze release If overloaded will release before breaking Fragmentation resistant / solid chance of still...

itw-101-3333

$5.99

View

HARDWARE / DIY

A-A-55301 Jacquard Multicam Webbing

web-55301-jac

$2.50

A-A-55301 style Nylon Webbing is similar to MIL-W-17337, commonly used for straps, PALS webbing, and more. It is fairly thin (approx 0.039-0.053 inches), yet offers a great breaking strength being 1000 lbs at 1" wide. Like most nylon webbing, after cutting it is fairly easy to seal ends with heat like from a flame. This particular one is multicam in...

View

PATCHES

A-A-55301 Nylon Webbing

web-55301

$1.60

A-A-55301 style Nylon Webbing is similar to MIL-W-17337, commonly used for straps, PALS webbing, and more. It is fairly thin and flexible (approx 0.039-0.053 inches), yet offers a great breaking strength being 1000 lbs at 1" wide. Like most nylon webbing, after cutting it is fairly easy to seal ends with heat like from a flame. Currently sold...

View

HARDWARE / DIY

ITW Looploc 1inch

itw-111-0100

$0.25

A simple hardware loop for various webbing interfacing such as adding connections or slack management. 1 unit = 1 LooplocITW Part Number: 111-0100-xxxx

View

HARDWARE / DIY

ITW TriGlide 1.5inch

The Triglide Strap Adjuster is perfect in any strap or webbing application where variable length is required. It also works well in combination with other buckles as a means of securing loose webbing needs. 1.5inch in particular is common for webbing adjustment on waist belts for packs. 1 unit = 1 Tri-GlideITW Part Number: 105-0150-xxxx

itw-105-0150

$0.50

View

HARDWARE / DIY

ITW GT Ruck 1inch Ladderloc

Hence the ruck part of the name, this is a beefed up version of a ladderlock to give the same functionality while holding up better to harder use. Hole on the pull tab allows for knotting cord for further pull options. 1 unit = 1 GT RuckITW Part Number: 154-2100-xxxx

itw-154-2100

$1.00

View

Out-of-Stock

HARDWARE / DIY

ITW GTSR Waveloc Split-Bar 1inch Female

NOTE: Only the female-body piece is sold on this page. For those tired of their straps slipping through normal buckles on actions such as rucking with speed, the Wavelocs offer a nice strong hold on 1" webbing. These will interface with other ITW and Duraflex 1" male pieces. Being different from the original Waveloc this split-bar version allows for a...

itw-810-1082

$1.00

View

Out-of-Stock

HARDWARE / DIY

ITW GTSR Waveloc Split-Bar 1inch Male

NOTE: Only the male-latch piece is sold on this page. For those tired of their straps slipping through normal buckles on actions such as rucking with speed, the Wavelocs offer a nice strong hold on 1" webbing. These will interface with other ITW and Duraflex 1" female pieces such as repair buckles, surface mounts, and the QASM. Being different from the...

itw-810-1083

$1.00

View

Product available with different options

HARDWARE / DIY

MIL-W-17337 Nylon Webbing

web-17337

$1.50

MIL-W-17337 style Nylon Webbing has been used in tactical goods for quite some time now, commonly used for straps, PALS webbing, and more. It is fairly thin and flexible (approx 0.038-0.050 inches), yet offers a great breaking strength being 1,200 lbs at 1" wide. Like most nylon webbing, after cutting it is fairly easy to seal ends with heat like from a...

View

Out-of-Stock

HARDWARE / DIY

ITW GT Waveloc XL 1inch Male

NOTE: Only the male piece is sold on this page. For those tired of their straps slipping through normal buckles on actions such as rucking with speed, the Wavelocs offer a nice strong hold on 1" webbing. These will interface with other ITW and Duraflex 1" female pieces such as repair buckles, surface mounts, and the QASM. Being different from the original...

itw-810-1081

$0.75

View

HARDWARE / DIY

AB G-Hook Wave

hard-00101

$2.25

AB Brand NOTE: These are the middle bar with wave variant to be more slip resistantG-hooks offer compact webbing mods connecting with a simple hook to 1" webbing and offering 1" slots to connect additional webbing. Example attachment points include the sides of tac-vests or up on shoulder straps (packs or vests). Since metal, the G-hooks are very flat...

View

Product available with different options

HARDWARE / DIY

AB G-Hook Flat

hard-00100

$2.00

AB Brand NOTE: These are the standard / flat versionG-hooks offer compact webbing mods connecting with a simple hook to 1" webbing and offering 1" slots to connect additional webbing. Example attachment points include the sides of tac-vests or up on shoulder straps (packs or vests). Since metal, the G-hooks are very flat compared to a typical SRB...

View

HARDWARE / DIY

Kong Tango

The Kong Tango: A longtime favorite for tactical safety connection. A lot like a caribiner with a great balance of speed and security. Gate will not open until the rear safety is engaged which occurs naturally when gripped. Slot will fit many applications, but flat side works nice with 1" webbing. Approx 5.5" long x 2.75" wide.

kong-tango

$27.99

View

Out-of-Stock

HARDWARE / DIY

AB Rounded Oval Slide Dual Slot 1inch

hard-00099

$0.60

A simple, yet handy slide. Can be used as a tri-glide or get creative such as making it interface with other hardware to create modular attachment points. Since flat and has more length than width it can be inserted into hardware loops creating a secure snag.

View

ACCESSORIES

Tough Hanger

Tough Hook

toughhook-0002

$14.99

Tired of finding creative ways to hang your heavy kit to get it off the floor? The Tough Hanger by Tough Hook is the easy fix with additional room for creative functionality. Made to hold heavy setups such as battle vests, scuba rigs, or whatever cool guy stuff you want to hang without having to worry about the hook exploding. While the original Tough...

View

Out-of-Stock

HARDWARE / DIY

Multicam Black Loop Sew-On

MMI Textiles

mmi-loop-sew-4in-mblack

$8.00

Harder to find Multicam Black Loop Fastener. Loop being the fuzzy/loopy side of hook and loop. Sold by the yard, 1 unit = 1 yard, this is the sew on version.Made by MMI textiles / Berry compliant.

View

Out-of-Stock

HARDWARE / DIY

Halco Luxmed L20 60in Loop

Halco

halco-lux-l20-60in-black

$18.60

Need to make a morale patch banner? This Knit Loop Fabric is great for those who need a large area to mount hook-backed patches or accessories. The holding strength is a good balance where will secure hook items, yet isn't overly difficult to remove items either; appropriate for a merchant setup. The width is 60", Sold by the yard, 1 unit = 1 yard, this...

View

HARDWARE / DIY

Duraflex Every Which Way Buckle Female

A unique buckle part to allow mounting to PALS / MOLLE webbing both vertically and horizontally. Duraflex offers solid Berry Compliant hardware and these parts can interface with other 1" ITW Military buckle parts too. Note: This product is just for the female part, 1 unit = 1 buckle. Part #9395

duraflex-9395

$1.50

View

Product available with different options

HARDWARE / DIY

Duraflex Siamese Slik Clip

Unique snap-on hardware to offer options to attach pouches or straps to gear. Slotted for 1inch webbing it also works well with PALS / MOLLE webbing. Check out the Regular version if you'd like only one side to have a snap opening. 1 unit is 1 clip. Part #6712

duraflex-6712

$0.75

View

Out-of-Stock

HARDWARE / DIY

Duraflex Slik Clip

Unique snap-on hardware to offer options to attach pouches or straps to gear. Slotted for 1inch webbing it also works well with PALS / MOLLE webbing. Check out the Siamese version if you'd like both sides to have a snap opening. 1 unit is 1 clip. Part #6548

duraflex-6548

$0.55

View

ACCESSORIES

Tough Hook Hanger

Tough Hook

toughhook-0001

$16.99

Tired of finding creative ways to hang your heavy kit to get it off the floor? The Tough Hook Hanger is the easy fix with additional room for creative functionality. Made to hold heavy setups such as battle vests, scuba rigs, or whatever cool guy stuff you want to hang without having to worry about the hook exploding. These things are so tough one can...

View

Product available with different options

HARDWARE / DIY

ITW GTSR SPLIT-BAR LATCH Male 1inch

A handy split-bar buckle part to allow more repair style buckle options. Great for replacing pack hardware and adding buckles to PALS webbing. These parts can interface with other 1" Duraflex Military buckle parts too. Note: This product is just for the male side and fixed slot / non adjustable style.ITW part number: 810-1072-xxxx

itw-810-1072

$1.00

View

HARDWARE / DIY

Kong Buckle 928F.44

A lesser known buckle, but made by Kong so you know it is good stuff. Functions similar to a cobra buckle so you get the stab style functionality, but made of carbon steel so feels a bit more heavy while providing plenty of strength all while being economical. Approx 4.5oz slotted for 1.75"ish webbing. Basic spec sheet: <KONG BUCKLE 928F.44>

kong-928f44

$10.00

View

HARDWARE / DIY

Adapt Pack Attachment Kit

Tactical Tailor

hard-00098

$9.95

For those who would like additional attachment hardware for their adapt pack. Example uses: if one wanted to pre-setup the hardware on an additional vest or large pack to allow quick attachment of an adapt pack.Parts include the webbing platforms with malice clips / male SRB parts and female parts of QASM buckles.Although made for the adapt pack, these...

View

HARDWARE / DIY

Duraflex Snap On Male Buckle 1inch

A handy snap-on buckle part to allow more repair style buckle options. Great for replacing pack hardware and adding buckles to PALS webbing. Duraflex offers solid Berry Compliant hardware and these parts can interface with other 1" ITW Military buckle parts too. Note: This product is just for the male side and fixed slot / non adjustable style. Part #9739

hard-00097

$1.00

View

HARDWARE / DIY

Duraflex Snap On Female Buckle 1inch

A handy snap-on buckle part to allow more repair style buckle options. Great for replacing pack hardware and adding buckles to PALS webbing. Duraflex offers solid Berry Compliant hardware and these parts can interface with other 1" ITW Military buckle parts too. Note: This product is just for the female side and fixed slot / non adjustable style. Part...

hard-00096

$1.00

View

Out-of-Stock

TACTICAL GEAR

AustriAlpin Cobra® Buckle - Anodized

Some people like the older anodized coats on COBRA® buckles, so we got in a little batch for the fans. Currently just offering Standard Foliage in 1.75" slot. (Complete buckles) AustriAlpin COBRA® quick releases buckles are, without equal, the world's safest, most finely crafted, and strongest load bearing quick release fasteners available. They are also...

hard-00095

$23.00

View

HARDWARE / DIY

Kong Frog - OEM

Kong doesn't offer the Frog Express version quite like they used to, but we were able to get a batch of OEM versions. This Frog variant has no markings, yet is mostly black, and uses the screw bolt in the back. The webbing slot size is more for .75", but one can still ram 1" tubular webbing in there just fine. For those concerned about the super plain...

kong-frog-003

$22.00

View

Out-of-Stock

HARDWARE / DIY

ITW GTLL 100 Split-Bar 1inch LadderLoc

Based on the original GTLL 100, but with a repair style slot for no-sew repairs. These are solid ladder-locks made with 1" webbing tactical product use in mind. Great for all kinds of quick adjustment applications; slings and backpack straps being a couple of examples. Typically attached on back slot, the front slot then offers one way webbing movement...

hard-00094

$0.65

View

Out-of-Stock

HARDWARE / DIY

MSM Snap Shackle Stout Swivel

Our own mix taking stainless steel shackles and getting them locally powder coated: Sporting captive pins and welded rings for long term durability. This is a beefy yet short version of the usual snap shackle for heavier quick release applications Also featuring a swiveling slot for 1" webbing. Spring loaded, latch will not release until ring is pulled...

hard-00093

$10.00

View

Maxpedition PZL Positive Grip Zipper Pulls - Large

Out-of-Stock

HARDWARE / DIY

Maxpedition PZL Positive Grip Zipper Pulls - Large

Maxpedition

max-PZL

$10.99

The PZL Positive Grip Zipper Pull (Large) are easy to use and require only a one finger pull action. They are shaped and textured for enhanced retention, and easy to grab with gloves.SOLD IN PACK OF 6.

View

HARDWARE / DIY

BFG ULoop

Blue Force Gear

bfg-UWL-UL1

$17.95

Sling hooks and clips are on borrowed time! The world no longer has to tolerate loud, jangly sling attachments, hooks that eat up aluminum and plastic eyelets, or hardware pieces that take too long to attach and remove. With the Patent Pending ULoop finally on the scene, the hook and clip extinction event has begun. The ULoop™ brings a level of...

View

Out-of-Stock

HARDWARE / DIY

Maxpedition TacTie PJC5

Maxpedition

max-PJC5

$11.99

The TacTie Polymer Joining Clip (PJC) is a heavy duty injection molded hardware component developed by the Maxpedition design team, and it comes in 2 sizes: PJC3 and PJC5. It is used to integrate accessory pockets and pouches onto packs, vests, ATLAS™ surfaces, PALS surfaces and MOLLE equipment in an interlocking manner. The TacTie PJC is secure when...

View

Out-of-Stock

HARDWARE / DIY

Maxpedition TacTie PJC3

Maxpedition

max-PJC3

$10.99

View

Out-of-Stock

HARDWARE / DIY

Adhesive Hook VELCRO® Brand

Sold by the foot, 1 unit = 1 foot. This is full on Military VELCRO® Brand Hook / Male side done with adhesive / sticky back - brand #72. Great for helmets, small electronics, weapon furniture, and more. The adhesive achieves full bond strength in 24 hours (after applying on the gear surface), and works well in temperature ranges from -20° F to 225° F.

hard-00091

$2.00

View

HARDWARE / DIY

AustriAlpin Cobra® Buckle 2.25inch Slot

The same great Cobra Buckle, just in a less common 2.25inch slot size. Sometimes a bit more space is needed for things like duty belt retro fit projects. AustriAlpin COBRA® quick releases buckles are, without equal, the world's safest, most finely crafted, and strongest load bearing quick release fasteners available. They are also the only stab-lock...

hard-00090

$25.00

View

Out-of-Stock

HARDWARE / DIY

MSM Mini Mod-D Carabiner MkII

FusionClimb

hard-00089

$7.00

Our first batch did well and now we bring you with MKII with low snag keynose style!: Overall approx 3.5" x 2" these make for great EDC and backup carabiners. The smaller size cuts down on bulk being better for holding other objects like sets of keys while at the same time these are real deal load bearing capable carabiners if you end up having to do some...

View

Out-of-Stock

HARDWARE / DIY

PUP Platforms

Bawidamann

hard-00040

$28.95

Finally got around to adding the new variants!The PUP (Pals Universal Platform) from Bawidamann Blades is a rugged, adjustable MOLLE/PALS platform solution for kydex knife sheaths, small magazines, lights and other items that is compatible with many retention systems and all MOLLE/PALS webbing. ST801 Super Tough Nylon - Made and assembled in the...

View

Out-of-Stock

HARDWARE / DIY

MSM Snap Shackle Mini

Cool hardware for quick release applications, smaller than usual size. Spring loaded, latch will not release until ring is pulled sideways away from the shackle. Latch can be resecured without pulling ring. Colors are powder coated to offer some tac-colors. Main shackle piece is approx 0.875" x 1.25"

hard-00085

$5.00

View

HARDWARE / DIY

TT Malice Clip Fight-Light

Tactical Tailor

hard-00084

$2.00

Tactical Tailor's latest gen Malice clips, the new Fight-Light series: Same heavy duty construction and they won’t come unwoven even if accidentally unlocked. They’re not affected by extreme temperature changes, they will never corrode, and on this latest version now they’re easier to weave due to the non-square edges, significantly lighter, 15% stronger,...

View

HARDWARE / DIY

AustriAlpin Cobra® Sport - FM Buckle

Taking the success of the Cobra® Buckle, Austri Alpin now has released a Sport - FM(Fashion Model) where you get the same great stab insert design features and quality in a much smaller size. Giving up the human load bearing rating, it sill is rated 800lb working capacity for all kinds of belt and pack gear type projects.NOTE: Just got in a resupply batch...

hard-00083

$15.00

View

HARDWARE / DIY

550 Cord - Paracord

hard-00082

$5.00

7-strand 550 cord, also known as Paracord, 550 refers to the breaking strength. The outter sheath gives the color then smaller white cords are in the interior. Very useful for all kinds of lashing needs, creating pull cords, bracelets, and much more. Ends can be eaily sealed with flame heat. Currently sold by the YARD. Thus a 10 unit pack = 10 yards /...

View

Out-of-Stock

HARDWARE / DIY

ITW Bar Button

Also known as Canadian style buttons, good for all kinds of projects including paracord, gear, and clothing. This product was developed to meet specific requirements for MILSPEC Govt programs and provides superior physical properties versus conventional melamine 4-hole sewn buttons. The GhillieTEX material not only provides the user with the highest...

hard-00081

$0.60

View

HARDWARE / DIY

Cobra® Buckle D-Ring

Austri-Alpin took the proven Cobra® Buckle and integrated a big boy D-ring so riggers belts no longer need a totally separate metal ring connection point. Strength rated as follows:~ Buckle: 18kN / 4000lb MBS (straight pull). 36kN Loop configuration.~ Dring: 22kN / 5000 lb MBS (straight pull).Far exceeds ANSI Z359.1, CSA, EN, UIAA, and NFPA standards for...

hard-00080

$27.95

View

FIELD SUPPLIES

Live Fire Gear - 550 Fire Cord

lfgear-00002

$9.99

View

Out-of-Stock

HARDWARE / DIY

ITW GTSR 1inch Waveloc Body

NOTE: Only the female / body piece is sold on this page. For those tired of their straps slipping through normal buckles on actions such as rucking with speed, the Wavelocs offer a nice strong hold on 1" webbing. These will interface with other ITW 1" male pieces. Due to the tight fit, only a single strip of webbing will fit through the slots so in some...

hard-00078

$0.75

View

HARDWARE / DIY

ITW GTLL 1inch Ladderloc

These are solid ladder-locks made with 1" webbing tactical product use in mind. Great for all kinds of quick adjustment applications; slings and backpack straps being a couple of examples. Typically attached on back slot, the front slot then offers one way webbing movement until tilted to offer two way webbing movement. With the lanyard hole one can add a...

hard-00077

$0.45

View

Out-of-Stock

HARDWARE / DIY

MSM Snap Shackle Large

Our own mix taking stainless steel shackles and getting them locally powder coated. Sport captive pins and welded rings for long term durability. Ranger Green hopefully coming in the near future.This is a larger version of the usual snap shackle for heavier quick release applications. Spring loaded, latch will not release until ring is pulled sideways...

hard-00076

$10.00

View

HARDWARE / DIY

MSM Snap Shackle Medium

Our own mix taking stainless steel shackles and getting them locally powder coated. Sport captive pins and welded rings for long term durability. Ranger Green hopefully coming in the near future. A quick release snap shackle in a common 2" overall length size. Classic hole slot , spring loaded, latch will not release until ring is pulled sideways away...

hard-00075

$6.00

View

Out-of-Stock

HARDWARE / DIY

MSM Snap Shackle 1" slot

Our own mix taking stainless steel shackles and getting them locally powder coated. Sport captive pins and welded rings for long term durability. Ranger Green hopefully coming in the near future.This version sports a 1" wide webbing slot, cool hardware for quick release applications. Spring loaded, latch will not release until ring is pulled sideways away...

hard-00074

$6.00

View

HARDWARE / DIY

Spring Loaded Cam Buckle

hard-00073

$5.50

Sometimes referred to as a quick release cam buckles, these have been in use since the ALICE gear era and are still used on cool guy slings today. General idea is they restrict webbing movement to one direction until the spring release is pulled to allow webbing movement in both directions. Made of metal they are quite durable and the design offers a...

View

HARDWARE / DIY

BFG Molded Burnsed Socket

Blue Force Gear

hard-00071

$19.95

A great piece of hardware to create a QR hole that can be attached by webbing offering great sling multipoint options and more. Although currently slotted more for 1.25" webbing, can work fine on 1" webbing as well. Constructed with a metal QR hole and polymer base offering a great balance of durability and affordability.

View

On sale!

Out-of-Stock

HARDWARE / DIY

BFG RED Swivel

Blue Force Gear

hard-00069

$25.00

Rapid Emergency Detachment Swivel (RED Swivel): A great piece of hardware that takes the concept of a QR swivel, but works with the gross motor movement of a grab and pull instead of the push of a small button. Fits anywhere a normal QR swivel could go. The patent pending RED™ Swivel releases with a straight pull on the sphereo-conical knob instead of...

View

HARDWARE / DIY

ITW GT Cobra® Buckle

ITW Nexus North America is proud to partner with AustriAlpin, the GT Cobra high strength polymer buckle system. Designed to be more robust than any other type of plastic hardware on the market, with a targeted tensile load of 500lbf, the GT Cobra buckle is a 100% Polymer system with no metal components. A few of the many GT Cobra advantages include its...

hard-00066

$5.05

View

Out-of-Stock

HARDWARE / DIY

ITW G-Hook Flat

NOTE: These are the standard / flat version 09241-22-2188xG-hooks offer compact webbing mods connecting with a simple hook to 1" webbing and offering 1" slots to connect additional webbing. Example attachment points include the sides of tac-vests or up on shoulder straps (packs or vests). Since metal, the G-hooks are very flat compared to a typical SRB...

hard-00065

$2.25

View

Out-of-Stock

HARDWARE / DIY

AUSTRIALPIN Cobra® Frame

Based on the AustriAlpin COBRA® buckle styling, these special tri-glides feature extremely high strength (18kN) and low profile design. Made of 7075 grade aluminum alloy with stainless steel adjuster bar. NOTE: AA has been transitioning from annodizing colors to powder coat colors so the coyote color can vary quite a bit, check in with us if you require...

hard-00064

$13.00

View

Out-of-Stock

HARDWARE / DIY

MSM QR Keychain Econo

The core strap is made of VELCRO® Brand ONE-WRAP® which allows placement of mini patches 2"x1" now using our powder coated snap shackles. Most folks will connect the QR shackle to something like a belt loop, but feel free to get creative connecting to other gear such as vests and packs. Currently made in house at MSM in the USA.-No Patches Included. NOTE:...

hard-00063

$8.00

View

Out-of-Stock

HARDWARE / DIY

MSM QR Belt Rig Econo

Based on our original QR belt rig, this variant uses less expensive parts to give good bang for the buck. We use one of our 2nds snap shackles which doesn't have a super durable coat, but functions great and instead of a g-hook a simple tri-glide is used. Although made with belts in mind, feel free to get creative connecting to other gear such as vests...

hard-00062

$8.00

View

Out-of-Stock

HARDWARE / DIY

54inch Multicam Loop VELCRO® Brand

Have a special large project like a morale patch banner where only the finest MIL velcro will do? This is full on VELCRO® Brand Loop fuzzy side done in Multicam camouflage with excellent color matching. The width is 54", Sold by the yard, 1 unit = 1 yard, this is the sew on version. If multiple yards are purchased we will assume to pack without...

hard-00061

$65.00

View

HARDWARE / DIY

Positive Locking Cord

hard-00060

$4.50

This Berry Compliant Cord is a similar width to 550 cord, however the rough texture makes it very grippy and hence the name, positive locking. Great for all kinds of lashing and tactical crafts, Just like 550 cord, the ends can be easily burned to seal / finish. Currently sold by the YARD. Thus a 10 unit pack = 10 yards / approx 30 feet.

View

HARDWARE / DIY

Shock Cord

hard-00059

$6.00

Berry Compliant Shock Cord Made with Invista IR Compliant nylon yarn. Shock cord works great as an elastic cord, popular on packs and other gear, a very handy DIY resource. Currently sold by the YARD. Thus a 10 unit pack = 10 yards / approx 30 feet.

View

On sale!
-40%

Out-of-Stock

HARDWARE / DIY

AustriAlpin Cobra® Buckle

Now sold as half buckles / parts to allow better customization! However one will need to buy both a male AND a female piece to make a complete buckle. (The classic standard is a male adjust and female fixed) AustriAlpin COBRA® quick releases buckles are, without equal, the world's safest, most finely crafted, and strongest load bearing quick release...

hard-00058

$5.94 $9.90

View

HARDWARE / DIY

ITW D-Ring

hard-00054

$0.35

ITW Nexus D-Ring are perfect wherever a rigid attachment point is required. Unlike metal D-Rings, they won't rust or corrode. 1 unit = 1 D-ringITW Part Number: 110-0100-xxxx

View

HARDWARE / DIY

ITW Tri-Glide 1inch

hard-00053

$0.45

View

HARDWARE / DIY

Adhesive Loop VELCRO® Brand

Sold by the foot, 1 unit = 1 foot. This is full on Military VELCRO® Brand Loop fuzzy side done with adhesive / sticky back - brand #72. Great for helmets, small electronics, weapon furniture, and more. The adhesive achieves full bond strength in 24 hours (after applying on the gear surface), and works well in temperature ranges from -20° F to 225° F.

hard-00052

$4.00

View

HARDWARE / DIY

VELCRO® ONE-WRAP® Brand 1inch

Sold by the YARD:VELCRO® Brand ONE-WRAP® has many uses, but for gear it really shines offering strap and wire management. A great replacement to where duct-tape was the common choice in the past, with one-wrap being much easier to release and reuse. One side is hook and one is loop, however the hook style is done lower profile so it doesn't accidentally...

hard-00051

$2.90

View

Out-of-Stock

HARDWARE / DIY

ITW Picatinny QASM Ramp

The Picatinny QASM-RAMP is designed to mount, hold and/or organize any/all of your M1913 Picatinny mountable accessories. Introduce this ultra-modular capability to your kit for unlimited mounting options in any location containing 1” sewn webbing. The new Picatinny QASM-RAMP can be used in numerous scenarios, whether it is mounting your incident camera,...

hard-00050

$5.00

View

Out-of-Stock

CLIMBING

Fusion Terminal 8

FusionClimb

hard-00048

$25.00

This aluminum descender has a large inside diameter with ears and belay slots. Large design makes it ideal for fast use in adverse conditions and easier to handle heavy loads. Ears allow user the ability to tie off the rope to use both hands freely. Overall approx 6.8" x 6.7" Width Height Major Weight Weight 6.8" 6.7" 45kn...

View

CLIMBING

MSM Pear-S Carabiner

With no luck getting a hold of carabiners in good colors we had to take matters into our own hands. These are great Pear / HMS shape S-Screwlock carabiners; Light weight aluminum sporting a classic pin nose for the most strength. The Pear shape offers a large gate opening and can be a belay device using a HMS knot. The screw lock is well knurled for a...

hard-00041

$12.00

View

HARDWARE / DIY

ITW ZipLine Alpha

These zipper pulls offer some nice benefits over traditional plastic end tabs. Since a fancy visco-elastic molded rubber-like material it will not absorb fluids. Tensile strength is around 40lbs so plenty enough to stand up to normal use, but will break away if snagged during heavy movement rather than resulting in a bad day. Different sliders will offer...

hard-00039

$0.75

View

HARDWARE / DIY

MSM Retracto-Plugs

Based on the tech used on our DLUX CG hats we are now bringing the same great functionality for helmets. Each pack contains 2 retractors each with a plug, with hook and loop sticky-back fastener circles. The plugs themselves are triple-flange style, 25 db rated, and are also replaceable using a screw mount. Although most users will use hook and loop for...

hard-00038

$12.00

View

CLIMBING

Safety Snap DA

hard-00037

$20.00

View

Out-of-Stock

HARDWARE / DIY

MSM QR Belt Rig

A seemingly simple rig made to allow a quick release setup on belts. The G-hook supplies many features including tri-glide functionality, alternate PALS connection, and enhanced grip when threading through both the hook and slots. Which side the pull cord faces can be easily changed by disassembling and flipping over the G-hook. Elastic is included to...

hard-00036

$14.00

View

HARDWARE / DIY

Para V-ring

hard-00035

$7.50

Commonly used on rigger's belts, this V-ring fits 1.75" webbing, or 1-23/32" if you want to get para-technical. Forged steel and rated as Strength: 4000 lb

View

Out-of-Stock

HARDWARE / DIY

Para Adjuster Bar

hard-00034

$9.25

Commonly used on rigger's belts, this adjuster bar fits 1.75" webbing, or 1-23/32" if you want to get para-technical. Forged steel and rated as Strength: 5000 lb

View

HARDWARE / DIY

1.25inch QD Sling Swivel

hard-00033

$14.00

These are great for weapon rail packages, stocks, and accessory mounts that support QD Sling Swivels. Loop itself rotates freely on one axis, however when installing into a mount, user can choose horizontal or vertical mounting rotation (90 degree flexibility). Release is performed by pressing the top "button". Gunmetal Grey color, sized to interface best...

View

Out-of-Stock

HARDWARE / DIY

1inch QD Sling Swivel

hard-00032

$12.00

View

HARDWARE / DIY

Grenade Rings

hard-00027

$0.75

Genuine grenade rings, only used once (ha!), make for great heavy duty keyrings as the thick wire used makes them much more bend resistant compared to typical keyrings. Approx 1" inner diameter and 1.25" outer diameter.For cart clarification 1 unit = 1 ring.

View

Out-of-Stock

HARDWARE / DIY

Keyring 1inch ID 1.25inch OD

hard-00026

$0.50

Some simple EDC kit, these are sturdy black keyrings. Approx 1.25" outside diameter, 1" inside diameter. A slightly beefy version of the size most expect a common keyring to be.

View

HARDWARE / DIY

Keyring 1.25inch ID 1.5inch OD

hard-00025

$0.80

Some simple EDC kit, these are beefy dark grey keyrings. Approx 1.5" outside diameter, 1.25" inside diameter.

View

Out-of-Stock

HARDWARE / DIY

ITW 1" Oval Slide

hard-00024

$0.75

View

Out-of-Stock

HARDWARE / DIY

ITW Tac-Link

These are great for non climbing carabiners. Rated at about 300lbs breaking strength, this is more than enough to secure a weapon, yet is a good spec to break away if heavily snagged to prevent injury. The latch hook has also been removed for general easier usability. The TAC-LINK is a high strength polymer attachment device with GhillieTEX™ IR signature...

hard-00023

$4.00

View

Out-of-Stock

HARDWARE / DIY

ITW G-Hook Wave

NOTE: These are the middle bar with wave variant 19241-22-2188xG-hooks offer compact webbing mods connecting with a simple hook to 1" webbing and offering 1" slots to connect additional webbing. Example attachment points include the sides of tac-vests or up on shoulder straps (packs or vests). Since metal, the G-hooks are very flat compared to a typical...

hard-00022

$2.50

View

HARDWARE / DIY

ITW SurfaceMount 1inch

ITW 1" Surface Mount Buckle consisting of 3 parts to make 1 unit:810-1059-xxxx – Surface Mount Buckle810-1060-xxxx – Surface Mount Base810-1058-xxxx – GTSR-1 maleAnother great SRB option, these Surface Mounts allow the female portion to be attached to fabrics. An example use is on magazine pouches as they enhance ease of use due to the female portion...

hard-00021

$1.00

View

Out-of-Stock

HARDWARE / DIY

ITW Waveloc Male

NOTE: Only the male piece is sold on this page. For those tired of their straps slipping through normal buckles on actions such as rucking with speed, the Wavelocs offer a nice strong hold on 1" webbing. These will interface with other ITW 1" female pieces such as repair buckles, surface mounts, and the QASM. Due to the tight fit, only a single strip of...

hard-00020

$0.50

View

HARDWARE / DIY

ITW Tac-Toggle

A simple piece of hardware that can enhance the pull capability of cordage. 2 holes in the center allow 550 cord size cord to be wrapped or tied as desired. Can be grabbed in numerous ways, but excels when gripped between fingers in a fist. Size is a good balance of grip-ability while not being a large snag hazard.ITW Part Number 743-0200-XXXX

hard-00019

$0.65

View

HARDWARE / DIY

ITW QASM

ITW 1" QASM (Quick Attach Surface Mount Buckle) consisting of 2 parts to make 1 unit:810-1076-xxxx – QASM Body810-1058-xxxx – GTSR-1 male(The result being 1 complete buckle)These are similar in concept to the repair buckles, however lay nice and flat consistently in place for a more low profile end result. Using the splits, no sewing is required and can...

hard-00018

$1.00

View

Product available with different options

HARDWARE / DIY

Multicam Loop VELCRO® Brand

Good MIL-Spec stuff and we are selling it by the foot. Hook is the male side with little hooks while loop is the the soft female side. This is the sew on version. Both sides, hook and loop are supplied with each foot unit purchased.

hard-00015

$2.00

This is full on VELCRO® Brand Loop fuzzy side done in Multicam camouflage with excellent color matching. Sold by the foot, 1 unit = 1 foot, this is the sew on version.

View

HARDWARE / DIY

Hook and Loop

hard-00014

$3.50

View

Out-of-Stock

HARDWARE / DIY

ITW Mash Hook 1.25inch slot

The MASH (Metal All-purpose Snap Hook) gateless snap hook offers an alternative to the HK-style snap hooks in common use for sling systems. The MASH is constructed from stainless steel and comes in sizes for 1" and 1.25" wide webbing. (NOTE this page is selling the 1.25" slot version) Pressing on the thumb tabs in the middle separates the two rings,...

hard-00013

$3.25

View

Out-of-Stock

HARDWARE / DIY

ITW Mash Hook 1inch slot

The MASH (Metal All-purpose Snap Hook) gateless snap hook offers an alternative to the HK-style snap hooks in common use for sling systems. The MASH is constructed from stainless steel and comes in sizes for 1" and 1.25" wide webbing. (NOTE this page is selling the 1" slot version) Pressing on the thumb tabs in the middle separates the two rings,...

hard-00012

$3.00

View

HARDWARE / DIY

ITW GTSP Cordlock

These cordlocks are designed with adventure use in mind. Top has raised bars for extra grip, side slots allow sew-down capability, and the bottom has a hole for drainage. The inside even has a raised wedge to enhance cord grip. The overall size is very compact allowing locking of 2 pieces of cord that are similar size to 550 paracord. These are great for...

hard-00011

$0.65

View

Out-of-Stock

HARDWARE / DIY

ITW Web Dominator

These lil guys are great for any gear with 1" straps that need slack management. Traditionally duct tape is used as semi-permanent solution, but with Web Dominators you can get the holding power with dramatically better on/off speed and no sticky mess to boot. This way the slack can still exist to give sizing options, yet isn't dangling everywhere as a...

hard-00010

$1.25

View

HARDWARE / DIY

ITW 1" Repair Buckle

ITW 1" Repair Buckle (SRB) consisting of 2 parts to make 1 unit:810-1064-xxxx – SR 1” female replacement buckle810-1058-xxxx – GTSR-1 male The main design goal for these buckles was to replace broken 1" Side Release Buckles (SRB) without any sewing required. They work great for that, however I like to use them to add straps to my gear since they easily...

hard-00009

$0.75

View

HARDWARE / DIY

ITW Grimloc

ITW Military Products Grimloc (Locking D-ring) ITW Part Number 110-4100-xxxx Originally made to allow Marines to add hydration carriers to their vests, these Grimlocs can be added to anything with PALS / MOLLE style 1" webbing. Once on, they make a great attachment point for weapon slings, lanyards, pouches, and more! The Grimloc™ is fabricated from...

hard-00008

$2.00

View

Out-of-Stock

HARDWARE / DIY

Snap Shackle Mini

Cool hardware for quick release applications, smaller than usual size. Spring loaded, latch will not release until ring is pulled sideways away from the shackle. Latch can be resecured without pulling ring. Come a little stiff, but break in well. Main shackle piece is approx 0.875" x 1.25"

hard-00007

$7.50

View

Out-of-Stock

HARDWARE / DIY

Snap Shackle Large

Some customers wanted a load bearing snap shackle, so here you go in cool guy black to boot. A little bit pricey, but cool hardware for quick release applications. Spring loaded, latch will not release until ring is pulled sideways away from the shackle. Latch can be resecured without pulling ring. 2.625" total length when closed x 1.5" width not counting...

hard-00006

$12.00

View

Out-of-Stock

HARDWARE / DIY

Snap Shackle Medium

A quick release snap shackle in a common 2" overall length size. Classic hole slot is easier to come by so a cheaper option than the 1" webbing slot version. Spring loaded, latch will not release until ring is pulled sideways away from the shackle. Latch can be resecured without pulling ring. Approx 1.25" x 1.875" closed and not counting the pull ring.

hard-00005

$9.50

View

Out-of-Stock

HARDWARE / DIY

Snap Shackle 1" slot

Black color with 1" slot. A little bit pricey, but cool hardware for quick release applications. Spring loaded, latch will not release until ring is pulled sideways away from the shackle. Latch can be resecured without pulling ring. Although not for human load bearing, it can still hold a lot of weight. Approx 1.25" x 1.625" closed and not counting the...

hard-00004

$8.50

View

Out-of-Stock

HARDWARE / DIY

HK Snaphooks - ITW Clash-hooks

hard-00003

$4.25

Clash Hooks, ITW Military's take on the HK style 1" slot Snap Hooks: offering cool guy colors and solid quality.ITW Part Number: 09267-23-210xx

View

Out-of-Stock

HARDWARE / DIY

Kong Frog