List of products by brand ITW NEXUS

Out-of-Stock

HARDWARE / DIY

ITW 3DSR Buckle 1inch

The 3DSR tactical buckle was made specifically for hard use applications such as Ruck Packs, Slings, and Plate carriers. Core features include: Easy release even while under load 300 pound load capacity Shaped to fit in palm for a consistent squeeze release If overloaded will release before breaking Fragmentation resistant / solid chance of still...

View

HARDWARE / DIY

ITW Looploc 1inch

itw-111-0100

$0.25

A simple hardware loop for various webbing interfacing such as adding connections or slack management. 1 unit = 1 LooplocITW Part Number: 111-0100-xxxx

View

HARDWARE / DIY

ITW TriGlide 1.5inch

itw-105-0150

$0.90

The Triglide Strap Adjuster is perfect in any strap or webbing application where variable length is required. It also works well in combination with other buckles as a means of securing loose webbing needs. 1.5inch in particular is common for webbing adjustment on waist belts for packs. 1 unit = 1 Tri-GlideITW Part Number: 105-0150-xxxx

View

HARDWARE / DIY

ITW GT Ruck 1inch Ladderloc

itw-154-2100

$1.00

Hence the ruck part of the name, this is a beefed up version of a ladderlock to give the same functionality while holding up better to harder use. Hole on the pull tab allows for knotting cord for further pull options. 1 unit = 1 GT RuckITW Part Number: 154-2100-xxxx

View

Out-of-Stock

HARDWARE / DIY

ITW GTSR Waveloc Split-Bar 1inch Female

itw-810-1082

$1.00

NOTE: Only the female-body piece is sold on this page. For those tired of their straps slipping through normal buckles on actions such as rucking with speed, the Wavelocs offer a nice strong hold on 1" webbing. These will interface with other ITW and Duraflex 1" male pieces. Being different from the original Waveloc this split-bar version allows for a...

View

Out-of-Stock

HARDWARE / DIY

ITW GTSR Waveloc Split-Bar 1inch Male

itw-810-1083

$1.00

NOTE: Only the male-latch piece is sold on this page. For those tired of their straps slipping through normal buckles on actions such as rucking with speed, the Wavelocs offer a nice strong hold on 1" webbing. These will interface with other ITW and Duraflex 1" female pieces such as repair buckles, surface mounts, and the QASM. Being different from the...

View

Out-of-Stock

HARDWARE / DIY

ITW GT Waveloc XL 1inch Male

itw-810-1081

$0.75

NOTE: Only the male piece is sold on this page. For those tired of their straps slipping through normal buckles on actions such as rucking with speed, the Wavelocs offer a nice strong hold on 1" webbing. These will interface with other ITW and Duraflex 1" female pieces such as repair buckles, surface mounts, and the QASM. Being different from the original...

View

Product available with different options

HARDWARE / DIY

ITW GTSR SPLIT-BAR LATCH Male 1inch

itw-810-1072

$1.00

A handy split-bar buckle part to allow more repair style buckle options. Great for replacing pack hardware and adding buckles to PALS webbing. These parts can interface with other 1" Duraflex Military buckle parts too. Note: This product is just for the male side and fixed slot / non adjustable style.ITW part number: 810-1072-xxxx

View

POUCHES / PANELS

ITW FastMag 5.56 Gen4

itw-fast556g4

$29.99

The latest generation of these proven polymer mag pouches: The combination of interior friction pad and outer tension bands keep magazines inside secure yet can be pulled out with a good yank and twist when desired. Placement of tension band or adding an additional one provides further tension options. 2 versions are offered, one with Stabilizer fins for...

View

Out-of-Stock

HARDWARE / DIY

ITW GTLL 100 Split-Bar 1inch LadderLoc

hard-00094

$0.65

Based on the original GTLL 100, but with a repair style slot for no-sew repairs. These are solid ladder-locks made with 1" webbing tactical product use in mind. Great for all kinds of quick adjustment applications; slings and backpack straps being a couple of examples. Typically attached on back slot, the front slot then offers one way webbing movement...

View

Out-of-Stock

HARDWARE / DIY

ITW Bar Button

hard-00081

$0.60

Also known as Canadian style buttons, good for all kinds of projects including paracord, gear, and clothing. This product was developed to meet specific requirements for MILSPEC Govt programs and provides superior physical properties versus conventional melamine 4-hole sewn buttons. The GhillieTEX material not only provides the user with the highest...

View

Out-of-Stock

HARDWARE / DIY

ITW GTSR 1inch Waveloc Body

hard-00078

$0.75

NOTE: Only the female / body piece is sold on this page. For those tired of their straps slipping through normal buckles on actions such as rucking with speed, the Wavelocs offer a nice strong hold on 1" webbing. These will interface with other ITW 1" male pieces. Due to the tight fit, only a single strip of webbing will fit through the slots so in some...

View

HARDWARE / DIY

ITW GTLL 1inch Ladderloc

hard-00077

$0.45

These are solid ladder-locks made with 1" webbing tactical product use in mind. Great for all kinds of quick adjustment applications; slings and backpack straps being a couple of examples. Typically attached on back slot, the front slot then offers one way webbing movement until tilted to offer two way webbing movement. With the lanyard hole one can add a...

View

HARDWARE / DIY

ITW GT Cobra® Buckle

hard-00066

$4.75

ITW Nexus North America is proud to partner with AustriAlpin, the GT Cobra high strength polymer buckle system. Designed to be more robust than any other type of plastic hardware on the market, with a targeted tensile load of 500lbf, the GT Cobra buckle is a 100% Polymer system with no metal components. A few of the many GT Cobra advantages include its...

View

Out-of-Stock

HARDWARE / DIY

ITW G-Hook Flat

hard-00065

$2.25

NOTE: These are the standard / flat version 09241-22-2188xG-hooks offer compact webbing mods connecting with a simple hook to 1" webbing and offering 1" slots to connect additional webbing. Example attachment points include the sides of tac-vests or up on shoulder straps (packs or vests). Since metal, the G-hooks are very flat compared to a typical SRB...

View

HARDWARE / DIY

ITW D-Ring

hard-00054

$0.35

ITW Nexus D-Ring are perfect wherever a rigid attachment point is required. Unlike metal D-Rings, they won't rust or corrode. 1 unit = 1 D-ringITW Part Number: 110-0100-xxxx

View

Product available with different options

HARDWARE / DIY

ITW Tri-Glide 1inch

hard-00053

$0.45

View

Out-of-Stock

HARDWARE / DIY

ITW Picatinny QASM Ramp

hard-00050

$5.00

The Picatinny QASM-RAMP is designed to mount, hold and/or organize any/all of your M1913 Picatinny mountable accessories. Introduce this ultra-modular capability to your kit for unlimited mounting options in any location containing 1” sewn webbing. The new Picatinny QASM-RAMP can be used in numerous scenarios, whether it is mounting your incident camera,...

View

HARDWARE / DIY

ITW ZipLine Alpha

hard-00039

$0.75

These zipper pulls offer some nice benefits over traditional plastic end tabs. Since a fancy visco-elastic molded rubber-like material it will not absorb fluids. Tensile strength is around 40lbs so plenty enough to stand up to normal use, but will break away if snagged during heavy movement rather than resulting in a bad day. Different sliders will offer...

View

Out-of-Stock

HARDWARE / DIY

ITW 1" Oval Slide

hard-00024

$0.75

A simple, yet handy slide. Can be used as a tri-glide or get creative such as making it interface with other hardware to create modular attachment points. Since flat and has more length than width it can be inserted into hardware loops creating a secure snag.

View

Out-of-Stock

HARDWARE / DIY

ITW Tac-Link

hard-00023

$4.00

These are great for non climbing carabiners. Rated at about 300lbs breaking strength, this is more than enough to secure a weapon, yet is a good spec to break away if heavily snagged to prevent injury. The latch hook has also been removed for general easier usability. The TAC-LINK is a high strength polymer attachment device with GhillieTEX™ IR signature...

View

Out-of-Stock

HARDWARE / DIY

ITW G-Hook Wave

hard-00022

$2.50

NOTE: These are the middle bar with wave variant 19241-22-2188xG-hooks offer compact webbing mods connecting with a simple hook to 1" webbing and offering 1" slots to connect additional webbing. Example attachment points include the sides of tac-vests or up on shoulder straps (packs or vests). Since metal, the G-hooks are very flat compared to a typical...

View

HARDWARE / DIY

ITW SurfaceMount 1inch

hard-00021

$1.00

ITW 1" Surface Mount Buckle consisting of 3 parts to make 1 unit:810-1059-xxxx – Surface Mount Buckle810-1060-xxxx – Surface Mount Base810-1058-xxxx – GTSR-1 maleAnother great SRB option, these Surface Mounts allow the female portion to be attached to fabrics. An example use is on magazine pouches as they enhance ease of use due to the female portion...

View

Out-of-Stock

HARDWARE / DIY

ITW Waveloc Male

hard-00020

$0.50

NOTE: Only the male piece is sold on this page. For those tired of their straps slipping through normal buckles on actions such as rucking with speed, the Wavelocs offer a nice strong hold on 1" webbing. These will interface with other ITW 1" female pieces such as repair buckles, surface mounts, and the QASM. Due to the tight fit, only a single strip of...

View

HARDWARE / DIY

ITW Tac-Toggle

hard-00019

$0.65

A simple piece of hardware that can enhance the pull capability of cordage. 2 holes in the center allow 550 cord size cord to be wrapped or tied as desired. Can be grabbed in numerous ways, but excels when gripped between fingers in a fist. Size is a good balance of grip-ability while not being a large snag hazard.ITW Part Number 743-0200-XXXX

View

HARDWARE / DIY

ITW QASM

hard-00018

$1.00

ITW 1" QASM (Quick Attach Surface Mount Buckle) consisting of 2 parts to make 1 unit:810-1076-xxxx – QASM Body810-1058-xxxx – GTSR-1 male(The result being 1 complete buckle)These are similar in concept to the repair buckles, however lay nice and flat consistently in place for a more low profile end result. Using the splits, no sewing is required and can...

View

Out-of-Stock

HARDWARE / DIY

ITW Mash Hook 1.25inch slot

hard-00013

$3.25

The MASH (Metal All-purpose Snap Hook) gateless snap hook offers an alternative to the HK-style snap hooks in common use for sling systems. The MASH is constructed from stainless steel and comes in sizes for 1" and 1.25" wide webbing. (NOTE this page is selling the 1.25" slot version) Pressing on the thumb tabs in the middle separates the two rings,...

View

Out-of-Stock

HARDWARE / DIY

ITW Mash Hook 1inch slot

hard-00012

$3.00

The MASH (Metal All-purpose Snap Hook) gateless snap hook offers an alternative to the HK-style snap hooks in common use for sling systems. The MASH is constructed from stainless steel and comes in sizes for 1" and 1.25" wide webbing. (NOTE this page is selling the 1" slot version) Pressing on the thumb tabs in the middle separates the two rings,...

View

HARDWARE / DIY

ITW GTSP Cordlock

hard-00011

$0.65

These cordlocks are designed with adventure use in mind. Top has raised bars for extra grip, side slots allow sew-down capability, and the bottom has a hole for drainage. The inside even has a raised wedge to enhance cord grip. The overall size is very compact allowing locking of 2 pieces of cord that are similar size to 550 paracord. These are great for...

View

Product available with different options

HARDWARE / DIY

ITW Web Dominator

hard-00010

$1.25

These lil guys are great for any gear with 1" straps that need slack management. Traditionally duct tape is used as semi-permanent solution, but with Web Dominators you can get the holding power with dramatically better on/off speed and no sticky mess to boot. This way the slack can still exist to give sizing options, yet isn't dangling everywhere as a...

View

HARDWARE / DIY

ITW 1" Repair Buckle

hard-00009

$0.75

ITW 1" Repair Buckle (SRB) consisting of 2 parts to make 1 unit:810-1064-xxxx – SR 1” female replacement buckle810-1058-xxxx – GTSR-1 male The main design goal for these buckles was to replace broken 1" Side Release Buckles (SRB) without any sewing required. They work great for that, however I like to use them to add straps to my gear since they easily...

View

HARDWARE / DIY

ITW Grimloc

hard-00008

$2.00

ITW Military Products Grimloc (Locking D-ring) ITW Part Number 110-4100-xxxx Originally made to allow Marines to add hydration carriers to their vests, these Grimlocs can be added to anything with PALS / MOLLE style 1" webbing. Once on, they make a great attachment point for weapon slings, lanyards, pouches, and more! The Grimloc™ is fabricated from...

View

Out-of-Stock

HARDWARE / DIY

HK Snaphooks - ITW Clash-hooks

hard-00003

$4.25

Clash Hooks, ITW Military's take on the HK style 1" slot Snap Hooks: offering cool guy colors and solid quality.ITW Part Number: 09267-23-210xx

View

Out-of-Stock

FIELD SUPPLIES

ITW Marine Whistle

field-00002

$1.50

These whistles can serve military and civilians alike offering a way to get others' attention whether it be in a rescue or threat situation. The size is slim while still offering a nice grip with an incorporated clip that fits great on webbing. Usability is easy which is important in a stressful situation. Just blow hard and you will be good to go making...

View

POUCHES / PANELS

ITW Pistol FASTMag

pouch-00008

$28.00

Based on the Original Fastmag design, this pistol variant offers the same great features to another caliber class. The open top design reduces reloading time for the operator and can be mounted in the up or down position. The enhanced urethane tension strap is adjustable to meet the users preference for removal tension. The FMP is also designed to...

View

Showing 1-35 of 35 item(s)