Out-of-Stock HARDWARE / DIY ITW 3DSR Buckle 1inch itw-101-3333 $5.99 The 3DSR tactical buckle was made specifically for hard use applications such as Ruck Packs, Slings, and Plate carriers. Core features include: Easy release even while under load 300 pound load capacity Shaped to fit in palm for a consistent squeeze release If overloaded will release before breaking Fragmentation resistant / solid chance of still... View
HARDWARE / DIY ITW Looploc 1inch itw-111-0100 $0.25 A simple hardware loop for various webbing interfacing such as adding connections or slack management. 1 unit = 1 LooplocITW Part Number: 111-0100-xxxx View
HARDWARE / DIY ITW TriGlide 1.5inch itw-105-0150 $0.90 The Triglide Strap Adjuster is perfect in any strap or webbing application where variable length is required. It also works well in combination with other buckles as a means of securing loose webbing needs. 1.5inch in particular is common for webbing adjustment on waist belts for packs. 1 unit = 1 Tri-GlideITW Part Number: 105-0150-xxxx View
HARDWARE / DIY ITW GT Ruck 1inch Ladderloc itw-154-2100 $1.00 Hence the ruck part of the name, this is a beefed up version of a ladderlock to give the same functionality while holding up better to harder use. Hole on the pull tab allows for knotting cord for further pull options. 1 unit = 1 GT RuckITW Part Number: 154-2100-xxxx View
Out-of-Stock HARDWARE / DIY ITW GTSR Waveloc Split-Bar 1inch Female itw-810-1082 $1.00 NOTE: Only the female-body piece is sold on this page. For those tired of their straps slipping through normal buckles on actions such as rucking with speed, the Wavelocs offer a nice strong hold on 1" webbing. These will interface with other ITW and Duraflex 1" male pieces. Being different from the original Waveloc this split-bar version allows for a... View
Out-of-Stock HARDWARE / DIY ITW GTSR Waveloc Split-Bar 1inch Male itw-810-1083 $1.00 NOTE: Only the male-latch piece is sold on this page. For those tired of their straps slipping through normal buckles on actions such as rucking with speed, the Wavelocs offer a nice strong hold on 1" webbing. These will interface with other ITW and Duraflex 1" female pieces such as repair buckles, surface mounts, and the QASM. Being different from the... View
Out-of-Stock HARDWARE / DIY ITW GT Waveloc XL 1inch Male itw-810-1081 $0.75 NOTE: Only the male piece is sold on this page. For those tired of their straps slipping through normal buckles on actions such as rucking with speed, the Wavelocs offer a nice strong hold on 1" webbing. These will interface with other ITW and Duraflex 1" female pieces such as repair buckles, surface mounts, and the QASM. Being different from the original... View
HARDWARE / DIY ITW GTSR SPLIT-BAR LATCH Male 1inch itw-810-1072 $1.00 A handy split-bar buckle part to allow more repair style buckle options. Great for replacing pack hardware and adding buckles to PALS webbing. These parts can interface with other 1" Duraflex Military buckle parts too. Note: This product is just for the male side and fixed slot / non adjustable style.ITW part number: 810-1072-xxxx View
POUCHES / PANELS ITW FastMag 5.56 Gen4 itw-fast556g4 $29.99 The latest generation of these proven polymer mag pouches: The combination of interior friction pad and outer tension bands keep magazines inside secure yet can be pulled out with a good yank and twist when desired. Placement of tension band or adding an additional one provides further tension options. 2 versions are offered, one with Stabilizer fins for... View
Out-of-Stock HARDWARE / DIY ITW GTLL 100 Split-Bar 1inch LadderLoc hard-00094 $0.65 Based on the original GTLL 100, but with a repair style slot for no-sew repairs. These are solid ladder-locks made with 1" webbing tactical product use in mind. Great for all kinds of quick adjustment applications; slings and backpack straps being a couple of examples. Typically attached on back slot, the front slot then offers one way webbing movement... View
Out-of-Stock HARDWARE / DIY ITW Bar Button hard-00081 $0.60 Also known as Canadian style buttons, good for all kinds of projects including paracord, gear, and clothing. This product was developed to meet specific requirements for MILSPEC Govt programs and provides superior physical properties versus conventional melamine 4-hole sewn buttons. The GhillieTEX material not only provides the user with the highest... View
Out-of-Stock HARDWARE / DIY ITW GTSR 1inch Waveloc Body hard-00078 $0.75 NOTE: Only the female / body piece is sold on this page. For those tired of their straps slipping through normal buckles on actions such as rucking with speed, the Wavelocs offer a nice strong hold on 1" webbing. These will interface with other ITW 1" male pieces. Due to the tight fit, only a single strip of webbing will fit through the slots so in some... View
HARDWARE / DIY ITW GTLL 1inch Ladderloc hard-00077 $0.45 These are solid ladder-locks made with 1" webbing tactical product use in mind. Great for all kinds of quick adjustment applications; slings and backpack straps being a couple of examples. Typically attached on back slot, the front slot then offers one way webbing movement until tilted to offer two way webbing movement. With the lanyard hole one can add a... View
HARDWARE / DIY ITW GT Cobra® Buckle hard-00066 $5.05 ITW Nexus North America is proud to partner with AustriAlpin, the GT Cobra high strength polymer buckle system. Designed to be more robust than any other type of plastic hardware on the market, with a targeted tensile load of 500lbf, the GT Cobra buckle is a 100% Polymer system with no metal components. A few of the many GT Cobra advantages include its... View
Out-of-Stock HARDWARE / DIY ITW G-Hook Flat hard-00065 $2.25 NOTE: These are the standard / flat version 09241-22-2188xG-hooks offer compact webbing mods connecting with a simple hook to 1" webbing and offering 1" slots to connect additional webbing. Example attachment points include the sides of tac-vests or up on shoulder straps (packs or vests). Since metal, the G-hooks are very flat compared to a typical SRB... View
HARDWARE / DIY ITW D-Ring hard-00054 $0.35 ITW Nexus D-Ring are perfect wherever a rigid attachment point is required. Unlike metal D-Rings, they won't rust or corrode. 1 unit = 1 D-ringITW Part Number: 110-0100-xxxx View
HARDWARE / DIY ITW Tri-Glide 1inch hard-00053 $4.00 The Triglide Strap Adjuster is perfect in any strap or webbing application where variable length is required. It also works well in combination with other buckles as a means of securing loose webbing needs. 1 unit = 1 Tri-GlideITW Part Number: 105-0100-xxxx View
Out-of-Stock HARDWARE / DIY ITW Picatinny QASM Ramp hard-00050 $5.00 The Picatinny QASM-RAMP is designed to mount, hold and/or organize any/all of your M1913 Picatinny mountable accessories. Introduce this ultra-modular capability to your kit for unlimited mounting options in any location containing 1” sewn webbing. The new Picatinny QASM-RAMP can be used in numerous scenarios, whether it is mounting your incident camera,... View
HARDWARE / DIY ITW ZipLine Alpha hard-00039 $0.75 These zipper pulls offer some nice benefits over traditional plastic end tabs. Since a fancy visco-elastic molded rubber-like material it will not absorb fluids. Tensile strength is around 40lbs so plenty enough to stand up to normal use, but will break away if snagged during heavy movement rather than resulting in a bad day. Different sliders will offer... View
Out-of-Stock HARDWARE / DIY ITW 1" Oval Slide hard-00024 $0.75 A simple, yet handy slide. Can be used as a tri-glide or get creative such as making it interface with other hardware to create modular attachment points. Since flat and has more length than width it can be inserted into hardware loops creating a secure snag. View
Out-of-Stock HARDWARE / DIY ITW Tac-Link hard-00023 $4.00 These are great for non climbing carabiners. Rated at about 300lbs breaking strength, this is more than enough to secure a weapon, yet is a good spec to break away if heavily snagged to prevent injury. The latch hook has also been removed for general easier usability. The TAC-LINK is a high strength polymer attachment device with GhillieTEX™ IR signature... View
Out-of-Stock HARDWARE / DIY ITW G-Hook Wave hard-00022 $2.50 NOTE: These are the middle bar with wave variant 19241-22-2188xG-hooks offer compact webbing mods connecting with a simple hook to 1" webbing and offering 1" slots to connect additional webbing. Example attachment points include the sides of tac-vests or up on shoulder straps (packs or vests). Since metal, the G-hooks are very flat compared to a typical... View
HARDWARE / DIY ITW SurfaceMount 1inch hard-00021 $1.00 ITW 1" Surface Mount Buckle consisting of 3 parts to make 1 unit:810-1059-xxxx – Surface Mount Buckle810-1060-xxxx – Surface Mount Base810-1058-xxxx – GTSR-1 maleAnother great SRB option, these Surface Mounts allow the female portion to be attached to fabrics. An example use is on magazine pouches as they enhance ease of use due to the female portion... View
Out-of-Stock HARDWARE / DIY ITW Waveloc Male hard-00020 $0.50 NOTE: Only the male piece is sold on this page. For those tired of their straps slipping through normal buckles on actions such as rucking with speed, the Wavelocs offer a nice strong hold on 1" webbing. These will interface with other ITW 1" female pieces such as repair buckles, surface mounts, and the QASM. Due to the tight fit, only a single strip of... View