TACTICAL GEAR

HARDWARE / DIY

Duraflex 1.25inch Sliplok Triglide

The Sliplok Triglide Adjuster is perfect in any strap or webbing application where variable length is required. It also works well in combination with other buckles as a means of securing loose webbing needs. This version is slotted for 1.25inch webbing. 1 unit = 1 Tri-GlidePart #4789

View

HARDWARE / DIY

Duraflex 1inch Single Gate Keeper

duraflex-w830

$1.15

A fairly unique design where like a loop, but accessible when desired by using a spring gate. This version is setup with 1inch webbing in mind.Note: Just one raw Single Gate Keeper is included per unit, no other parts come with it. Part #W830

View

HARDWARE / DIY

Loop Fastener - Sew On

hard-00110

$0.60

Good MIL-Spec stuff and we are selling it by the foot. In reference to Hook and Loop Fastener: Hook is the male side with little hooks while loop is the the soft female side. This is the sew on version of just the LOOP side. If multiple units of one color are ordered, we do not add additional cuts. 1 unit = 1 foot.

View

Out-of-Stock

HARDWARE / DIY

Duraflex 1.5inch Double Gate Keeper

duraflex-w819

$1.55

A fairly unique design where one side is a standard lash point while the other is accessible when desired by using a spring gate. This version is setup with 1.5inch webbing in mind for both slots.Note: Just one raw Double Gate Keeper is included per unit, no other parts come with it. Part #W819

View

HARDWARE / DIY

Duraflex 1inch Double Gate Keeper

duraflex-w836

$1.25

A fairly unique design where one side is a standard lash point while the other is accessible when desired by using a spring gate. This version is setup with 1inch webbing in mind for both slots.Note: Just one raw Double Gate Keeper is included per unit, no other parts come with it. Part #W836

View

HARDWARE / DIY

Duraflex 1.5inch Heavy Duty D-ring

duraflex-4775

$0.50

An acetal based D-ring design, this heavy duty series is made to handle a smidge more weight than the standard D-ring series. This one in particular is slotted for 1.5inch webbing. Just one raw D-ring is included per unit, no other parts come with it. Part #4775

View

On sale!

BLADES

KA-BAR MSM Knife 002 RAW

blade-00005

$45.00

It has been a lot longer than we all wanted, but our collaboration knife with KA-BAR is now available in the 002 variant. Being very similar to the original 001, this 002 variant sports a drop point blade to give more options. There were some production complications so to not take any longer, this is the RAW version with NO sheath. The general idea is...

View

POUCHES / PANELS

MSM Medium Patch Panel Laminate

pouch-00026

$34.00

Based on our classic small patch panel design, now made with laminate construction. Wide enough to fit name tapes and tall enough to fit most patches. As a new feature PALS webbing slots are cut on the front for more usage options. To make good use of the platform space, a zipper pocket is incorporated for additional storage. This medium size is just a...

View

POUCHES / PANELS

MSM Large Patch Panel Laminate

pouch-00027

$40.00

Based on our classic large patch panel design, now made with laminate construction. As a new feature PALS webbing slots are cut on the front for more usage options. Although the main design goal is simple to allow hook backed patch mounting on a PALS / MOLLE area of a vest or pack; to make good use of the material a zipper pocket is integrated. The...

View

POUCHES / PANELS

MSM Small Patch Panel Laminate

pouch-00025

$25.00

View

HARDWARE / DIY

Woodland M81 Loop Sew-On MMI

hard-00109-woodland

$4.50

Woodland M61 Loop Fastener. Loop being the fuzzy/loopy side of hook and loop. Sold by the yard, 1 unit = 1 yard, this is the sew on version.Made by MMI textiles / Berry compliant.

View

HARDWARE / DIY

Multicam Loop Sew-On MMI

hard-00108-multic

$5.00

Multicam Loop Fastener. Loop being the fuzzy/loopy side of hook and loop. Sold by the yard, 1 unit = 1 yard, this is the sew on version.Made by MMI textiles / Berry compliant.

View

Out-of-Stock

HARDWARE / DIY

Multi Mount - Sling Mount

di-qd-multi-mount

$24.95

Hence the name, this is a very adaptive sling mount that attaches by 1913 Picatinny Rail. Connection points include: QD on top, Another QD on one side, Small hole on the other side, and the mount itself is slotted for 1inch webbing. Although a down side it must be slid into place on a rail, the more simplistic design also makes it more durable. As most...

View

Out-of-Stock

HARDWARE / DIY

QD Sling Connector

di-qd-sling-con

$18.00

This slide on connector is made to add a QD connection point to a sling, a great option to give a two point sling the option to switch to a single point setup. Currently offered in 1inch slot version. QD swivel is NOT included.-6061 Aluminum, Hardcoat Anodized-Made in the USA

View

Out-of-Stock

HARDWARE / DIY

QD Sling Swivel D Loop

di-qd-swivel-d

$12.95

These are a nice modern take on QD (Quick Detach) Swivels commonly used for weapon slings. Release is performed by pressing the top "button"; this particular swivel button is recessed to be accidental release resistant, however is still easy to release when purposefully pressed. Rather than a classic loop this variant sports a D-ring style loop promoting...

View

HARDWARE / DIY

QD Sling Swivel Oval Loop

di-qd-swivel-oval

$12.95

These are a nice modern take on QD (Quick Detach) Swivels commonly used for weapon slings. Release is performed by pressing the top "button"; this particular swivel button is recessed to be accidental release resistant, however is still easy to release when purposefully pressed. A classic oval loop and currently offered in 1inch and 1.25inch webbing slot...

View

HARDWARE / DIY

70E Elastic Webbing

web-70e

$1.80

A Polyester woven elastic that has a good amount of thickness which can offer more padding compared to lower profile elastics. Similar to nylon products, after cutting it is fairly easy to seal ends with heat like from a flame. Currently sold by the YARD, so 1unit = 1yard. If multiple yards (of 1 color) are purchased it will be one chunk / uncut.

View

HARDWARE / DIY

AB Slinghook 1inch

hard-00107

$3.70

AB brand's offering of Mashhook style hardware for sling attachment. The original intent is to be an alternative hardware option to HK style snap-hooks as sometimes accidental releases can be created with normal sling usage rotation. Rather than a specific spring, the Slinghooks use default material tension to keep closure, practically eliminating...

View

HARDWARE / DIY

AB Metal Loop Rectangle Welded 1inch

hard-00106

$0.55

Simple metal rectangle, slotted for 1inch webbing and welded for strength. Spaced for more thickness with interior space being approx 1-1/8inch (28mm) x 5/16inch (9mm) Berry compliant / made in the USA. 1unit = 1 loop and no other items are included

View

HARDWARE / DIY

AB Metal Loop Oval Welded 1inch

hard-00105

$0.55

Simple metal oval, slotted for 1inch webbing and welded for strength. Spaced for some wiggle room with interior space being approx 1-1/8inch+ (29mm) x .25inch (6mm) Berry compliant / made in the USA. 1unit = 1 loop and no other items are included

View

HARDWARE / DIY

AB Metal D-ring Welded 1inch

hard-00104

$0.55

Simple metal D-rings, slotted for 1inch webbing and welded for strength. Berry compliant / made in the USA. 1unit = 1 d-ring and no other items are included

View

HARDWARE / DIY

MIL-W-5664 Elastic Webbing

web-5664

$1.60

MIL-SPEC MIL-W-5664 Elastic Nylon Woven Webbing, Type II Class ISlim and durable, a good option when need to add a little stretch. Like most nylon webbing, after cutting it is fairly easy to seal ends with heat like from a flame. Currently sold by the YARD, so 1unit = 1yard. If multiple yards (of 1 color) are purchased it will be one chunk / uncut.

View

Out-of-Stock

FIELD SUPPLIES

Tacmed Tramedic Trauma Bandage

tacmed-TR011

$4.50

The Tramedic® Trauma Bandage is a simple, effective pressure dressing designed to treat non-life threatening hemorrhaging. It utilizes an elastic wrap material that can be used to generate pressure and a sterile wound pad that can be placed directly over the injury to aid the control of bleeding. The bandage is flat folded and vacuum-sealed to create a...

View

Out-of-Stock

FIELD SUPPLIES

Tacmed OLAES Modular Bandage

tacmed-OALFP-4

$7.50

The OLAES® Modular Bandage is the newest generation of trauma bandages and is advantageous for all levels of care providers. Packed with features such as 3 meters of gauze, a removable occlusive plastic sheet behind the OLAES® trauma dressing pad, and a pressure cup that can also act as a rigid eye shield, the advanced capabilities of the medical...

View

FIELD SUPPLIES

Tacmed OLAES Hemostatic Bandage

tacmed-85-0024

$48.00

The OLAES® Hemostatic Bandage combines the globally recognized OLAES® Modular Bandage with battle tested HemCon® ChitoGauze® PRO to create the most comprehensive trauma bandage for multiple injury profiles. Both proven life-saving devices are now together in a single, easily accessible package to increase any level of pre-hospital care provider’s...

View

POUCHES / PANELS

First Tactical Trauma Kit

firsttac-180045

$34.99

The First Tactical Trauma Kit is a larger sized pouch with a good dose of interior organization to hold various medical supplies. A double zipper clam-shell style opening makes it easy to full open, and the exterior sports a hi-viz orange with loop area for patch labeling. A pull handle is integrated up top to assist in pulling out of larger bags and...

POUCHES / PANELS

First Tactical 9x10 Hook Backed Pouch

firsttac-180030

$19.99

The 9x10inch version of First Tactical's Hook backed Pouch line, great for organizing packs with loop zones for attachment.These pouches sport standard features of-Clear front panel to see contents-Dual slider zippers-Quick Pull Tab, to assist in quick opening-Loop area on front for patch labeling-Additional color pull cords included for color coding...

POUCHES / PANELS

First Tactical 6x10 Hook Backed Pouch

firsttac-180033

$19.99

The 6x10inch version of First Tactical's Hook backed Pouch line, great for organizing packs with loop zones for attachment.These pouches sport standard features of-Clear front panel to see contents-Dual slider zippers-Quick Pull Tab, to assist in quick opening-Loop area on front for patch labeling-Additional color pull cords included for color coding...

Out-of-Stock

POUCHES / PANELS

First Tactical 9x6 Hook Backed Pouch

firsttac-180034

$16.99

The 9x6inch version of First Tactical's Hook backed Pouch line, great for organizing packs with loop zones for attachment.These pouches sport standard features of-Clear front panel to see contents-Dual slider zippers-Quick Pull Tab, to assist in quick opening-Loop area on front for patch labeling-Additional color pull cords included for color coding...

View

Out-of-Stock

POUCHES / PANELS

First Tactical 6x6 Hook Backed Pouch

firsttac-180032

$16.99

The 6x6inch version of First Tactical's Hook backed Pouch line, great for organizing packs with loop zones for attachment.These pouches sport standard features of-Clear front panel to see contents-Dual slider zippers-Quick Pull Tab, to assist in quick opening-Loop area on front for patch labeling-Additional color pull cords included for color coding...

View

Out-of-Stock

POUCHES / PANELS

First Tactical 6x3 Hook Backed Pouch

firsttac-180031

$14.99

The 6x3inch version of First Tactical's Hook backed Pouch line, great for organizing packs with loop zones for attachment.These pouches sport standard features of-Clear front panel to see contents-Dual slider zippers-Quick Pull Tab, to assist in quick opening-Loop area on front for patch labeling-Additional color pull cords included for color coding...

View

POUCHES / PANELS

BFG Dapper Insert Panel

DAP-INSERT-04

$17.00

Simple stiffened inserts with loop on both sides to accommodate hook-backed pouches and accessories. Great for packs that don't already have loop zones or if want to make pull-out panels for any pack. Offered in 3 sizes: 6"x8"10"x16"13"x19" As with all Blue Force Gear products, this product is made with excellence in the USA and carries a limited...

View

POUCHES / PANELS

MSM Shear Pouch Plus Laminate

pouch-00024

$14.00

NEW Laminate / Laser cut version:Based on our simple shear pouch, we decided why not go ahead and add on elastic loops to allow holding of a tourniquet as well. The loops are a nice snug fit good for holding popular tourniquets such as the CAT and SOF-T. Due to the layout change, the security strap is now VELCRO® Brand ONE-WRAP® based which releases easy...

View

POUCHES / PANELS

Thyrm Cell Vault 5m

thyrm-cv5m

$54.99

The CellVault-5M Modular Battery Storage provides a safe haven for the batteries you rely on the most; high-drain cells that power your critical flashlights & gear. Whether you need CR123’s for a helmet light or NVGs, 18350’s for your pistol, or 18650’s for your rifle, the CellVault-5M can be configured to carry exactly what you need and keep cells...

View

ACCESSORIES

Rhino Hanger

toughhook-0003

$12.99

From the makers of the Tough Hook and Hanger, this Rhino variant is similar to the Tough Hanger, but replaces the lower grip with lower tension clips for more accessory holding options.Tired of finding creative ways to hang your heavy kit to get it off the floor? The Rhino Hanger is the easy fix with additional room for creative functionality. Made to...

View

POUCHES / PANELS

Thyrm Cell Vault 18

thyrm-cv18

$24.99

Premium batteries require protection from physical and environmental damage but need to remain accessible to keep advanced tactical lights running at full power. The CellVault-18 takes attachable 18650 and 18350 battery storage to the next level with new features like side windows that help you verify gear status, a metal locking latch, and waterproof...

View

BLADES

KA-BAR MSM Knife 002 + TapRack Sheath

blade-00004

$95.00

It has been a lot longer than we all wanted, but our collaboration knife with KA-BAR is now available in the 002 variant. Being very similar to the original 001, this 002 variant sports a drop point blade to give more options. The general idea is to have a wide blade with an enhanced thumb ramp and thick enough for plenty of abuse. All kinds of grips are...

View

TACTICAL GEAR

Thyrm VariArc Helmet Mount

thyrm-va001

$29.99

The VariArc™ Helmet Mount: Delivering the direction capability your helmet rail mount should have had Positively locks in the forward index position Directs light through 360 degrees, with 8 additional lower-force index positions Works in vertical positions for umbrella lighting rooms, canopy illumination, and IR strobe signaling Can be used in...

View

On sale!

Out-of-Stock

PACKS / BAGS

MSM Adapt Pack Laser Cut GGG

pack-00005

$100.00

A resupply of our Adapt Pack design in a new laminate laser cut variant! The general design concept to be a lightweight pack that is ready for military use, while being just as handy for hard use civilians. This time a collaboration with Grey Ghost Gear.-Pack is able to be quickly setup ambidextrous for either 2 strap or 1strap modes, extra modular SRB...

View

Out-of-Stock

PACKS / BAGS

MSM Adapt Pack Laser Cut

pack-00004

$155.00

A limited run batch of our Adapt Pack design in a new laminate laser cut variant! The general design concept to be a lightweight pack that is ready for military use, while being just as handy for hard use civilians. Check out the video below for a quick breakdown, made in the USA by Tactical tailor.-Pack is able to be quickly setup ambidextrous for either...

View

HARDWARE / DIY

Kong 751NNN6CNKK Mini D Screw-lock

kong-751nnn6cnkk

$8.00

This carabiner design is for those looking for a smaller EDC size, but is quite the durability upgrade over novelty carabiners. Coming in a shiny black it sports a screw gate for security options and key-nose to prevent snagging.NOT FOR HUMAN LOAD-BEARING however is rated for 600kg made of aluminum. Approx 3.125" x 1.875" with 13mm gate opening Weight:...

Out-of-Stock

HARDWARE / DIY

Kong 751NN0400KK Mini D Carabiner

kong-751nn0400kk

$6.00

This carabiner design is for those looking for a smaller EDC size, but is quite the durability upgrade over novelty carabiners. Coming in a matte black it sports a simple straight gate for easy access and key-nose to prevent snagging.NOT FOR HUMAN LOAD-BEARING however is rated for 600kg made of aluminum. Approx 3.125" x 1.875" with 16mm gate opening...

View

Out-of-Stock

HARDWARE / DIY

Keyring 1.125nch ID 1.375inch OD

keyring-1-125in

$0.75

Some simple EDC kit, these are beefy dark grey keyrings. Approx 1.125" inside diameter, 1.375" outside diameter.1unit = 1 keyring and no other items are included

View

Out-of-Stock

HARDWARE / DIY

MSM QASM Vertical Attachment Kit

hard-00103

$7.00

This hardware adapter kit is for those that wish there was a way to mount ITW QASM buckles vertically. A kit comes as a pair including:-2 ITW 810-1076-xxxx – QASM Body/Female, and 2 laser cut laminate pieces.The fit is loose on 1" PALS webbing and snug on laser cut PALS 2" spacing, either setup is secure and requires no sewing. Additionally the QASM parts...

View

HARDWARE / DIY

Austri Alpin Pro Style Cobra Buckle

aa-cobra-ps

$23.50

NEW latest generation PRO STYLE Cobra buckles include changes to prevent only securing one clip instead of both and slots to minimize debris getting in the way of securing the buckle. A new HPC coating is also utilized to offer improved coating durability.AustriAlpin COBRA® quick releases buckles are, without equal, the world's safest, most finely...

View

FIELD SUPPLIES

XShear Trauma Shears 7.5inch

xshear-16T7T-bk

$35.00

If use your trauma shears near everyday or want to step up your shears game these XShear trauma shears were designed from the ground up to greatly enhance the quality level on the classic trauma shears concept. Features include: Hardened stainless steel blades that are twice as thick as most trauma shears, sharpened to a razor edge. BLACK TITANIUM...

View

HARDWARE / DIY

Duraflex Molle Tee Mount

duraflex-9703

$0.50

This is a unique piece made to cause a stop point when connections are dropped into PALS webbing slots. Useful especially if the connected hardware is too large to fit through a PALS slot, the MOLLE Tee can be turned to a side to pass through and then back to the normal position once exposed to secure the mount. Note: Just one raw Molle Tee is included...

View

POUCHES / PANELS

Thyrm DarkVault Critical Gear Case

thyrm-dv001

$59.99

Protect your critical communication & navigation gear from a full spectrum of threats. This case is available in two versions: DarkVault (blocking) and DarkVault-Comms (non-blocking). DarkVault and DarkVault-Comms Cases feature:-Solid, battlefield-grade construction-Gasket seal that keeps out water, dust, and dirt-Quick MOLLE attachment system for...

View

HARDWARE / DIY

AB HK Style SnapHook 1inch slot

hard-00102

$3.75

AB brand USA made take on the HK style 1" slot Snap Hooks: offering cool guy colors and solid quality.

View

Out-of-Stock

HARDWARE / DIY

ITW 3DSR Buckle 1inch

itw-101-3333

$5.99

The 3DSR tactical buckle was made specifically for hard use applications such as Ruck Packs, Slings, and Plate carriers. Core features include: Easy release even while under load 300 pound load capacity Shaped to fit in palm for a consistent squeeze release If overloaded will release before breaking Fragmentation resistant / solid chance of still...

View

Out-of-Stock

POUCHES / PANELS

MSM Practical Results Wallet LaserCut

pouch-00023

$23.00

Based on our original wallet, now done with laminate / laser cut construction to make it even more low profile!As the name implies this wallet is meant to be straight forward and get the job done with all the common wallet tasks that may come your way. Unlike super minimal wallets out there that look cool, but don't hold jack and are cumbersome to...

View

HARDWARE / DIY

A-A-55301 Jacquard Multicam Webbing

web-55301-jac

$2.50

A-A-55301 style Nylon Webbing is similar to MIL-W-17337, commonly used for straps, PALS webbing, and more. It is fairly thin (approx 0.039-0.053 inches), yet offers a great breaking strength being 1000 lbs at 1" wide. Like most nylon webbing, after cutting it is fairly easy to seal ends with heat like from a flame. This particular one is multicam in...

View

HARDWARE / DIY

A-A-55301 Nylon Webbing

web-55301

$1.60

A-A-55301 style Nylon Webbing is similar to MIL-W-17337, commonly used for straps, PALS webbing, and more. It is fairly thin and flexible (approx 0.039-0.053 inches), yet offers a great breaking strength being 1000 lbs at 1" wide. Like most nylon webbing, after cutting it is fairly easy to seal ends with heat like from a flame. Currently sold by the...

View

HARDWARE / DIY

ITW Looploc 1inch

itw-111-0100

$0.25

A simple hardware loop for various webbing interfacing such as adding connections or slack management. 1 unit = 1 LooplocITW Part Number: 111-0100-xxxx

View

HARDWARE / DIY

ITW TriGlide 1.5inch

itw-105-0150

$0.90

The Triglide Strap Adjuster is perfect in any strap or webbing application where variable length is required. It also works well in combination with other buckles as a means of securing loose webbing needs. 1.5inch in particular is common for webbing adjustment on waist belts for packs. 1 unit = 1 Tri-GlideITW Part Number: 105-0150-xxxx

View

HARDWARE / DIY

ITW GT Ruck 1inch Ladderloc

itw-154-2100

$1.00

Hence the ruck part of the name, this is a beefed up version of a ladderlock to give the same functionality while holding up better to harder use. Hole on the pull tab allows for knotting cord for further pull options. 1 unit = 1 GT RuckITW Part Number: 154-2100-xxxx

View

Out-of-Stock

HARDWARE / DIY

ITW GTSR Waveloc Split-Bar 1inch Female

itw-810-1082

$1.00

NOTE: Only the female-body piece is sold on this page. For those tired of their straps slipping through normal buckles on actions such as rucking with speed, the Wavelocs offer a nice strong hold on 1" webbing. These will interface with other ITW and Duraflex 1" male pieces. Being different from the original Waveloc this split-bar version allows for a...

View

Out-of-Stock

HARDWARE / DIY

ITW GTSR Waveloc Split-Bar 1inch Male

itw-810-1083

$1.00

NOTE: Only the male-latch piece is sold on this page. For those tired of their straps slipping through normal buckles on actions such as rucking with speed, the Wavelocs offer a nice strong hold on 1" webbing. These will interface with other ITW and Duraflex 1" female pieces such as repair buckles, surface mounts, and the QASM. Being different from the...

View

HARDWARE / DIY

MIL-W-17337 Nylon Webbing

web-17337

$1.50

MIL-W-17337 style Nylon Webbing has been used in tactical goods for quite some time now, commonly used for straps, PALS webbing, and more. It is fairly thin and flexible (approx 0.038-0.050 inches), yet offers a great breaking strength being 1,200 lbs at 1" wide. Like most nylon webbing, after cutting it is fairly easy to seal ends with heat like from a...

View

POUCHES / PANELS

Agilite Bridge Tactical Helmet Accessory Platform

agilite-8260

$66.95

The Agilite Bridge is a great way to make a tactical helmet go from plain to night ops ready with a solid one-size fits most platform.Features Include:• One Size System-fits all common tactical helmets • Universal rear pod that fits all common Battery Packs/Counterweights • Proprietary rear pod provides impact protection for battery packs. • Exit holes...

View

Maxpedition Entity Hook & Loop Mesh Storage Panel

Out-of-Stock

POUCHES / PANELS

Maxpedition Entity Hook & Loop Mesh Storage Panel

max-NTTPNMGRY

$17.99

A simple Mesh Storage Panel using Maxpedition's very durable, but see-through Gossamer material. Opens with a single zipper, Hook is on the back to mount inside any gear with loop zones.Overall approx: 5"(W) x 7"(H) x 2"(D) 1.3oz

View

Maxpedition Entity Hook & Loop Admin Panel

Out-of-Stock

POUCHES / PANELS

Maxpedition Entity Hook & Loop Admin Panel

max-NTTPNAGRY

$18.99

Another Admin Panel from the Entity series, this one has a layout good for one multitool/medium flashlight sized item and several writing tools. Hook on the back to go inside any gear with loop zones.Overall approx: 5"(W) x 7"(H) 1.3oz

View

Out-of-Stock

FIELD SUPPLIES

MSM EMT Shears TiCN

field-00022

$8.00

Handy EMT / Medical Shears good for cutting about anything, but primarily used for removal of clothing on wounded patients to allow access to injuries. Overall solid in quality, they can do all the classics like cut pennies, this TiCN coated version makes for a very durable coat with smooth action.About 7.5" in total length when measured from furthest...

View

Out-of-Stock

HARDWARE / DIY

ITW GT Waveloc XL 1inch Male

itw-810-1081

$0.75

NOTE: Only the male piece is sold on this page. For those tired of their straps slipping through normal buckles on actions such as rucking with speed, the Wavelocs offer a nice strong hold on 1" webbing. These will interface with other ITW and Duraflex 1" female pieces such as repair buckles, surface mounts, and the QASM. Being different from the original...

View

HARDWARE / DIY

AB G-Hook Wave

hard-00101

$2.25

AB Brand NOTE: These are the middle bar with wave variant to be more slip resistantG-hooks offer compact webbing mods connecting with a simple hook to 1" webbing and offering 1" slots to connect additional webbing. Example attachment points include the sides of tac-vests or up on shoulder straps (packs or vests). Since metal, the G-hooks are very flat...

View

HARDWARE / DIY

AB G-Hook Flat

hard-00100

$2.00

AB Brand NOTE: These are the standard / flat versionG-hooks offer compact webbing mods connecting with a simple hook to 1" webbing and offering 1" slots to connect additional webbing. Example attachment points include the sides of tac-vests or up on shoulder straps (packs or vests). Since metal, the G-hooks are very flat compared to a typical SRB...

View

HARDWARE / DIY

Kong Tango

kong-tango

$27.99

The Kong Tango: A longtime favorite for tactical safety connection. A lot like a caribiner with a great balance of speed and security. Gate will not open until the rear safety is engaged which occurs naturally when gripped. Slot will fit many applications, but flat side works nice with 1" webbing. Approx 5.5" long x 2.75" wide.

View

Product available with different options

HARDWARE / DIY

AB Rounded Oval Slide Dual Slot 1inch

hard-00099

$0.60

A simple, yet handy slide. Can be used as a tri-glide or get creative such as making it interface with other hardware to create modular attachment points. Since flat and has more length than width it can be inserted into hardware loops creating a secure snag.

View

Out-of-Stock

ACCESSORIES

Tough Hanger

toughhook-0002

$14.99

Tired of finding creative ways to hang your heavy kit to get it off the floor? The Tough Hanger by Tough Hook is the easy fix with additional room for creative functionality. Made to hold heavy setups such as battle vests, scuba rigs, or whatever cool guy stuff you want to hang without having to worry about the hook exploding. While the original Tough...

View

Out-of-Stock

FIELD SUPPLIES

Zippo Windproof Lighter

zippo-218

$16.00

Ol' reliable Zippo Lighters, made popular in WWII with soldiers and still popular today for good reason. Comes packaged in a gift box. Currently stocking Matte Black and Matte Green (OD) Genuine Zippo windproof lighter with distinctive Zippo "click" All metal construction; windproof design works virtually anywhere Refillable for a lifetime of use;...

View

Out-of-Stock

FIELD SUPPLIES

Zippo Emergency Fire Kit

zippo-40478-efk

$11.95

Designed to save the day, the Emergency Fire Kit comes through when others turn back. Its compact and high-caliber construction packs enough punch to overpower bleak conditions and fire up your campsite at a moment's notice. FEATURES: Zippo flint spark wheel Includes 5 easy lightweight paraffin wax-coated spark tinder Ignites with spark or flame...

View

Out-of-Stock

FIELD SUPPLIES

Zippo Mag Strike

zippo-40477-ms

$14.95

The Zippo Mag Strike is simple and effective with a robust size to make it easy to grip. The ferrocerium rod and striker deliver a shower of sparks to light your fire wherever and whenever. Its textured grip, solid triangular body and the ultra-sharp blade allow you to strike with more precision and firepower to ignite every adventure. FEATURES:...

View

Out-of-Stock

FIELD SUPPLIES

Zippo Typhoon Match Kit

zippo-40483-tmk

$11.95

This match kit is ready for any adventure. Its heavy-duty construction and sealed strike pad keep the 15 (included) Typhoon Matches protected and in one place, so you can light your fire in even the most severe conditions. Tube itself is a great survival container if not holding just matches.Item includes 1 Match Kit, 15 Typhoon Matches & 3 Strike Pads...

View

HARDWARE / DIY

Multicam Black Loop Sew-On

mmi-loop-sew-4in-mblack

$8.00

Harder to find Multicam Black Loop Fastener. Loop being the fuzzy/loopy side of hook and loop. Sold by the yard, 1 unit = 1 yard, this is the sew on version.Made by MMI textiles / Berry compliant.

View

On sale!
-50%

Out-of-Stock

FIELD SUPPLIES

Thyrm PyroVault

thyrm-pv001

$15.00 $29.99

Up-armor your classic lighter with a sealed enclosure, webbing clip, and sure-grip surfaces. Finally, your favorite lighter can keep up with you wherever you go. PyroVault™ Features: Housing accepts standard Zippo-style lighter inserts including both fluid and butane torch models O-ring seal keeps the elements out and minimizes evaporation...

View

Out-of-Stock

POUCHES / PANELS

Maxpedition Entity Hook & Loop Low Profile Panel

max-NTTPNFGRY

$18.99

The Entity Hook & Loop Low Profile Panel is a flat organizer panel that can be securely attached to any loop surface. Assorted pockets, sleeves, and elastic bands keep objects organized.Overall approx: 5"(W) x 7"(H) 1.3oz

View

Maxpedition Entity Hook & Loop Utility Panel

Out-of-Stock

POUCHES / PANELS

Maxpedition Entity Hook & Loop Utility Panel

max-NTTPNUGRY

$19.99

The Entity Hook & Loop Utility Panel is a low profile organizer panel that can be securely attached to any loop surface. Dual pouches with hook & loop flaps are perfect for securing contents such as handgun magazines and/or flashlights.Overall approx: 5"(W) x 7"(H) x 1.25"(D) 1.8oz

View

HARDWARE / DIY

Halco Luxmed L20 60in Loop

halco-lux-l20-60in-black

$18.60

Need to make a morale patch banner? This Knit Loop Fabric is great for those who need a large area to mount hook-backed patches or accessories. The holding strength is a good balance where will secure hook items, yet isn't overly difficult to remove items either; appropriate for a merchant setup. The width is 60", Sold by the yard, 1 unit = 1 yard, this...

View

POUCHES / PANELS

TT RRPS Modular Zipper Utility Medium

tt-10315

$38.50

Tactical Tailor’s Rapid Repositionable Pouch System (RRPS) serves a variety of needs and will attach to any hook and loop system. Designed to help organize packs, bags, or anything else lined with loop, these pouches can also be fixed onto the seat backs of vehicles to help organize mission essentials no matter where you are going. The RRPS Medium...

View

TT Low Vis Double Stack Pistol Double Mag Pouch

Product available with different options

POUCHES / PANELS

TT Low Vis Double Stack Pistol Double Mag Pouch

tt-22058

$13.75

The Low Vis Double Stack Pistol Double Magazine Pouch will hold two standard double stack pistol magazines with a tough elastic body. The entire back of the pouch is covered with hook fastener to attach directly to gear with loop fields. Made in the USA by Tactical Tailor.Approx: 3" tall x 5" wide

View

Out-of-Stock

PACKS / BAGS

MSM CYOA Loop Pack

pack-00003

$175.00

The CYOA Loop pack name is based on the "Choose Your Own Adventure" books from back in the day and although the design starts with tactical use in mind, the hope is that all kinds of adventurers will find it useful. Starting with our Adapt pack for core design features we wanted to make a larger pack for those who found the Adapt pack to be too small....

View

POUCHES / PANELS

TT Low Vis Double Stack Pistol Single Mag Pouch

tt-22057

$8.25

The Low Vis Double Stack Pistol Single Magazine Pouch will hold one standard double stack pistol magazine with a tough elastic body. The entire back of the pouch is covered with hook fastener to attach directly to gear with loop fields. Made in the USA by Tactical Tailor.Approx: 3" tall x 2.75" wide

View

POUCHES / PANELS

TT Low Vis Double 5.56 Magazine Pouch

tt-22054

$26.55

The Low Vis Double 5.56 Magazine Pouch will hold two 30 round AR style magazines with a tough elastic body and an adjustable bungee retention system that can be easily removed if desired. The entire back of the pouch is covered with hook fastener to attach directly to gear with loop fields. Made in the USA by Tactical Tailor.Approx: 5.5" tall x 7" wide

View

TT RRPS Low Vis Single 5.56 Magazine Pouch

POUCHES / PANELS

TT Low Vis Single 5.56 Magazine Pouch

tt-22053

$16.45

The Low Vis Single 5.56 Magazine Pouch will hold one 30 round AR style magazine with a tough elastic body and an adjustable bungee retention system that can be easily removed if desired. The entire back of the pouch is covered with hook fastener to attach directly to gear with loop fields. Made in the USA by Tactical Tailor.Approx: 5.5" tall x 4" wide

View

POUCHES / PANELS

TT RRPS Slim Line Admin Pouch

tt-10302

$37.50

View

Out-of-Stock

POUCHES / PANELS

TT RRPS Modular Zipper Utility Small

tt-10314

$35.95

View

POUCHES / PANELS

TT RRPS 4-Row Channel Tear Away Panel

tt-10356

$28.75

View

POUCHES / PANELS

TT RRPS 3-Row Channel Tear Away Panel

tt-10355

$28.75

View

Out-of-Stock

POUCHES / PANELS

TT RRPS Accessory Pouch 1V

tt-10351

$20.47

The RRPS Accessory Pouch 1H is a horizontal utility pouch designed to hold your smaller miscellaneous items, such as first aid supplies, small tools, or anything else that you can think of. Features dual zipper pulls and loop on the front for attachment of label or name tapes, or other patches. The back of the pouch is lined with hook for attachment to...

View

POUCHES / PANELS

TT RRPS Accessory Pouch 1H

tt-10350

$20.47

View

Out-of-Stock

POUCHES / PANELS

TT RRPS Large Mesh Pocket

tt-10310

$20.47

View

POUCHES / PANELS

TT RRPS Medium Mesh Pocket

tt-10311

$18.95

View

Out-of-Stock

POUCHES / PANELS

TT RRPS Small Mesh Pocket

tt-10312

$17.43

View

Out-of-Stock

POUCHES / PANELS

Maxpedition Cuboid Medium

max-1803

$20.99

Cuboid organizers are soft containers excellent for travel and ideal for items that don't wrinkle when folded or rolled. Their mesh areas allow viewing of contents. They are spec'd to fit within each other. Two Medium CUBOID will fit into one Large CUBOID. Two small CUBOID will fit into one Medium CUBOID. When not in use, they can be stored within each...

View

Product available with different options

HARDWARE / DIY

Duraflex Every Which Way Buckle Female

duraflex-9395

$1.50

A unique buckle part to allow mounting to PALS / MOLLE webbing both vertically and horizontally. Duraflex offers solid Berry Compliant hardware and these parts can interface with other 1" ITW Military buckle parts too. Note: This product is just for the female part, 1 unit = 1 buckle. Part #9395

View

HARDWARE / DIY

Duraflex Siamese Slik Clip

duraflex-6712

$0.75

Unique snap-on hardware to offer options to attach pouches or straps to gear. Slotted for 1inch webbing it also works well with PALS / MOLLE webbing. Check out the Regular version if you'd like only one side to have a snap opening. 1 unit is 1 clip. Part #6712

View

HARDWARE / DIY

Duraflex Slik Clip

duraflex-6548

$0.55

Unique snap-on hardware to offer options to attach pouches or straps to gear. Slotted for 1inch webbing it also works well with PALS / MOLLE webbing. Check out the Siamese version if you'd like both sides to have a snap opening. 1 unit is 1 clip. Part #6548

View

Product available with different options

ACCESSORIES

Tough Hook Hanger

toughhook-0001

$16.99

Tired of finding creative ways to hang your heavy kit to get it off the floor? The Tough Hook Hanger is the easy fix with additional room for creative functionality. Made to hold heavy setups such as battle vests, scuba rigs, or whatever cool guy stuff you want to hang without having to worry about the hook exploding. These things are so tough one can...

View

Product available with different options

HARDWARE / DIY

ITW GTSR SPLIT-BAR LATCH Male 1inch

itw-810-1072

$1.00

A handy split-bar buckle part to allow more repair style buckle options. Great for replacing pack hardware and adding buckles to PALS webbing. These parts can interface with other 1" Duraflex Military buckle parts too. Note: This product is just for the male side and fixed slot / non adjustable style.ITW part number: 810-1072-xxxx

View

HARDWARE / DIY

Kong Buckle 928F.44

kong-928f44

$10.00

A lesser known buckle, but made by Kong so you know it is good stuff. Functions similar to a cobra buckle so you get the stab style functionality, but made of carbon steel so feels a bit more heavy while providing plenty of strength all while being economical. Approx 4.5oz slotted for 1.75"ish webbing. Basic spec sheet: <KONG BUCKLE 928F.44>

View

HARDWARE / DIY

Adapt Pack Attachment Kit

hard-00098

$9.95

For those who would like additional attachment hardware for their adapt pack. Example uses: if one wanted to pre-setup the hardware on an additional vest or large pack to allow quick attachment of an adapt pack.Parts include the webbing platforms with malice clips / male SRB parts and female parts of QASM buckles.Although made for the adapt pack, these...

View

POUCHES / PANELS

ITW FastMag 5.56 Gen4

itw-fast556g4

$29.99

The latest generation of these proven polymer mag pouches: The combination of interior friction pad and outer tension bands keep magazines inside secure yet can be pulled out with a good yank and twist when desired. Placement of tension band or adding an additional one provides further tension options. 2 versions are offered, one with Stabilizer fins for...

View

Product available with different options

POUCHES / PANELS

MSM Zippered Key Pouch

pouch-00022

$16.00

We aren't the first to make this type of pouch, but hope folks will appreciate our take on the idea. Made from high quality materials ours has a little padding to make the zipper function smooth along with helping carrying comfort. We also make our zippered key pouch a little longer so more EDC type tools/gadgets can be carried. You might be thinking like...

View

POUCHES / PANELS

MSM Large Patch Panel

pouch-00021

$28.00

Our small patch panel has been popular so we now offer this larger size to allow mounting of larger patches. Although the main design goal is simple to allow hook backed patch mounting on a PALS / MOLLE area of a vest or pack; to make good use of the material a zipper pocket is integrated. The interior space starts fairly flat, yet some items of decent...

View

HARDWARE / DIY

Duraflex Snap On Male Buckle 1inch

hard-00097

$1.00

A handy snap-on buckle part to allow more repair style buckle options. Great for replacing pack hardware and adding buckles to PALS webbing. Duraflex offers solid Berry Compliant hardware and these parts can interface with other 1" ITW Military buckle parts too. Note: This product is just for the male side and fixed slot / non adjustable style. Part #9739

View

HARDWARE / DIY

Duraflex Snap On Female Buckle 1inch

hard-00096

$1.30

A handy snap-on buckle part to allow more repair style buckle options. Great for replacing pack hardware and adding buckles to PALS webbing. Duraflex offers solid Berry Compliant hardware and these parts can interface with other 1" ITW Military buckle parts too. Note: This product is just for the female side and fixed slot / non adjustable style. Part...

View

Out-of-Stock

TACTICAL GEAR

AustriAlpin Cobra® Buckle - Anodized

hard-00095

$23.00

Some people like the older anodized coats on COBRA® buckles, so we got in a little batch for the fans. Currently just offering Standard Foliage in 1.75" slot. (Complete buckles) AustriAlpin COBRA® quick releases buckles are, without equal, the world's safest, most finely crafted, and strongest load bearing quick release fasteners available. They are also...

View

Maxpedition IMP Individual Medical Pouch

Out-of-Stock

POUCHES / PANELS

Maxpedition IMP Individual Medical Pouch

max-IMP

$34.99

The IMP Individual Medical Pouch is a scaled back version of the FRP First Response Pouch. The front zippered pocket has a clear vinyl window to easily view contents. The dual zippered main compartment has a full-length opening, and there are interior pockets for organization of first aid essentials. Although designed with a first-aid loadout in mind, the...

View

Out-of-Stock

POUCHES / PANELS

Maxpedition Cuboid Small

max-1804

$21.99

Cuboid organizers are soft containers excellent for travel and ideal for items that don't wrinkle when folded or rolled. Their mesh areas allow viewing of contents. They are spec'd to fit within each other. Two Medium CUBOID will fit into one Large CUBOID. Two Small CUBOID will fit into one Medium CUBOID. When not in use, they can be stored within each...

View

Out-of-Stock

HARDWARE / DIY

Kong Frog - OEM

kong-frog-003

$22.00

Kong doesn't offer the Frog Express version quite like they used to, but we were able to get a batch of OEM versions. This Frog variant has no markings, yet is mostly black, and uses the screw bolt in the back. The webbing slot size is more for .75", but one can still ram 1" tubular webbing in there just fine. For those concerned about the super plain...

View

Out-of-Stock

TACTICAL GEAR

TapRack Sheath for KA-BAR MSM Knife 001

blade-00003

$57.00

The default sheath for the KA-BAR MSM Knife 001 will make do, but some requested a high end kydex sheath so we made some happen thanks to TapRack Holsters. They come with the hardware to use with the supplied BladeTech Belt mount and can still use Malice Clips as well. NO KNIFE included on this version.

View

Out-of-Stock

TACTICAL GEAR

KA-BAR MSM Knife 001 + TapRack Sheath

blade-00002

$87.00

Now with version 001 supplies almost gone, we wanted to make the last ones special so offering ones with high end sheaths by TapRack Holsters. They come with the hardware to use with the supplied BladeTech Belt mount and can still use Malice Clips as well. Pack comes with all the pieces one normally gets with a knife purchase along with the sheath. Main...

View

Out-of-Stock

HARDWARE / DIY

ITW GTLL 100 Split-Bar 1inch LadderLoc

hard-00094

$0.65

Based on the original GTLL 100, but with a repair style slot for no-sew repairs. These are solid ladder-locks made with 1" webbing tactical product use in mind. Great for all kinds of quick adjustment applications; slings and backpack straps being a couple of examples. Typically attached on back slot, the front slot then offers one way webbing movement...

View

HARDWARE / DIY

MSM Snap Shackle Stout Swivel

hard-00093

$10.00

Our own mix taking stainless steel shackles and getting them locally powder coated: Sporting captive pins and welded rings for long term durability. This is a beefy yet short version of the usual snap shackle for heavier quick release applications Also featuring a swiveling slot for 1" webbing. Spring loaded, latch will not release until ring is pulled...

View

POUCHES / PANELS

Thyrm CellVault XL

thyrm-cvxl

$29.99

The CellVault XL is the large version of the CellVault. Like the original CellVault, it protects batteries and other critical gear while keeping it accessible and organized. The integrated webbing clip allows you to access the CellVault’s contents without removing it, or you can quickly detach it for more control. The CellVault XL has twice the capacity...

View

Out-of-Stock

POUCHES / PANELS

Maxpedition MPP Medium Padded Pouch

max-MPP

$35.99

The MPP Medium Padded Pouch has a dual zipper opening, plus a magnetic closure for extra security of contents. It has 3MM padded foam for added protection, and there is an interior mesh sleeve for organization. It comes with two (2) matching TacTie® PJC3™ Polymer Joining Clips for modular attachment to any MOLLE-compatible surface such as ATLAS™ or PALS....

View

Product available with different options

POUCHES / PANELS

Maxpedition HLP Hook & Loop Pouch

max-HLP

$25.99

The HLP Hook & Loop pouch has a hook backing for secure attachment to any loop surface. Nylon composite hook tabs assist in removing the pouch from the loop surface. There are exterior fabric pockets and an interior Gossamer™ mesh pocket for added organization. Makes for great pack/bag inner organization with quick access sleeve pockets on the exterior...

View

Maxpedition PZL Positive Grip Zipper Pulls - Large

Out-of-Stock

HARDWARE / DIY

Maxpedition PZL Positive Grip Zipper Pulls - Large

max-PZL

$10.99

The PZL Positive Grip Zipper Pull (Large) are easy to use and require only a one finger pull action. They are shaped and textured for enhanced retention, and easy to grab with gloves.SOLD IN PACK OF 6.

View

Product available with different options

HARDWARE / DIY

BFG ULoop

bfg-UWL-UL1

$17.95

Sling hooks and clips are on borrowed time! The world no longer has to tolerate loud, jangly sling attachments, hooks that eat up aluminum and plastic eyelets, or hardware pieces that take too long to attach and remove. With the Patent Pending ULoop finally on the scene, the hook and clip extinction event has begun. The ULoop™ brings a level of...

View

POUCHES / PANELS

BFG Accessory Loop Dapper

bfg-DAP-LOOP

$12.00

BFG Accessory Loop Dappers are hook backed organizers with simple elastic loops; currently offered in 6 different sizes to provide a great variety of holding needs. They will attach to any loop fields or materials that interface with hook fasteners, for example the interior of the Dapper Utility pouches have loop so one can double organize! The Small...

View

POUCHES / PANELS

BFG Large Utility Dapper Pouch

bfg-DAP-U-VINYL-01

$44.95

The Large Utility Dapper Pouch is a larger utility pouch to hold most everyday items and mission gear such as chargers, personal items, computer equipment, medical supplies, tools, magazines or almost any other item one would carry in a bag. The Large Utility Dapper can be quickly installed and removed on any loop field to quickly change the load out,...

View

Out-of-Stock

POUCHES / PANELS

BFG Vertical Utility Dapper Pouch

bfg-DAP-U-VINYL-02

$39.95

The Vertical Utility Dapper Pouch is one of the more versatile Dapper Pouches, as it is able to hold almost anything from down range to downtown mission sets. Able to hold chargers, personal items, computer equipment, medical supplies, tools, magazines or other mission critical items, the Vertical Utility Pouch keeps gear organized and in place so that it...

View

Out-of-Stock

POUCHES / PANELS

BFG Admin Dapper Pouch

bfg-DAP-ADP

$44.95

The Admin Dapper Pouch is one of the more versatile Dappers™, and is able to hold M4 mags, pens, chargers, personal items, computer equipment, medical supplies, tools, magazines or other mission critical items. The Dapper Admin Pouch system is the ultimate in discreet, modular carrying, allowing the user to keep gear organized and accessible while being...

View

POUCHES / PANELS

BFG Ten-Speed Triple M4 Dapper Pouch

bfg-DAP-TSP-M4-3

$26.95

The Ten-Speed Triple M4 Dapper combines the legendary Ten-Speed performance with the flexibility of the Dapper system to provide the lightest, low profile way to carry spare magazines or other mission essential equipment. Three military-grade elastic slots hold most M4 magazines, lights, multi-tools, or other similar-sized items secure and in place. The...

View

POUCHES / PANELS

BFG Ten-Speed Single M4 Dapper Pouch

bfg-DAP-TSP-M4-1

$19.95

The Ten-Speed Single M4 Dapper combines the legendary Ten-Speed performance with the flexibility of the Dapper organization system to keep magazines and other gear in place and readily accessible. The Ten-Speed® pockets lie flat when not in use for reduced bulk and greater storage flexibility. The military-grade elastic front can fit an endless range of...

View

POUCHES / PANELS

BFG Ten-Speed Triple Pistol Dapper Pouch

bfg-DAP-TSP-PISTOL-3

$24.95

The Ten-Speed Triple Pistol Dapper combines the legendary Ten-Speed performance with the flexibility of the Dapper system to provide the lightest, low profile way to carry spare magazines or other similar-sized items. Three military-grade elastic pockets hold most double or single stack pistol magazines, lights, multitools, or other similar-sized items...

View

BFG Ten-Speed Single Pistol Dapper Pouch

Out-of-Stock

POUCHES / PANELS

BFG Ten-Speed Single Pistol Dapper Pouch

bfg-DAP-TSP-PISTOL-1

$18.95

The Ten-Speed Single Pistol Dapper combines the legendary Ten-Speed performance with the flexibility of the Dapper system to provide the lightest, low profile way to carry spare magazines or other similar sized items. A military-grade elastic slot holds most double or single stack pistol magazines, lights, multitools, or other similar-sized items secure...

View

Out-of-Stock

HARDWARE / DIY

Maxpedition TacTie PJC5

max-PJC5

$11.99

The TacTie Polymer Joining Clip (PJC) is a heavy duty injection molded hardware component developed by the Maxpedition design team, and it comes in 2 sizes: PJC3 and PJC5. It is used to integrate accessory pockets and pouches onto packs, vests, ATLAS™ surfaces, PALS surfaces and MOLLE equipment in an interlocking manner. The TacTie PJC is secure when...

View

Out-of-Stock

HARDWARE / DIY

Maxpedition TacTie PJC3

max-PJC3

$10.99

View

Out-of-Stock

POUCHES / PANELS

Maxpedition XBP Expandable Bottle Pouch

max-XBP

$33.99

The XBP Expandable Bottle Pouch is designed to attach to MOLLE-compatible bags and packs. Overall sleek look when closed and unzips to expand when needed. It has TPU-840D nylon composite backing and comes with two TacTie® PJC5™ Polymer Joining Clips for modular attachment. The XBP fits a wide range of common bottles including the 32 oz. Nalgene widemouth...

View

Out-of-Stock

POUCHES / PANELS

Maxpedition PCL Packing Cube - Large

max-PCL

$25.99

The PCL Packing Cube (Large) is a soft container excellent for travel accessories you want to keep separate from the rest of your belongings. The packing cube has been designed to be used with larger AGR bags and packs, such as the IRONCLOU™ and IRONSTORM™. Its fabric is color-coordinated to match the grayscale interior lining of other AGR products. The...

View

Out-of-Stock

POUCHES / PANELS

Maxpedition PCM Packing Cube - Medium

max-PCM

$23.99

The PCM Packing Cube (Medium) is a soft container excellent for travel accessories you want to keep separate from the rest of your belongings. The packing cube has been designed to be used with larger AGR bags and packs, such as the IRONCLOUD™ and IRONSTORM™. Its fabric is color coordinated to match the grayscale interior lining of other AGR products....

View

POUCHES / PANELS

Maxpedition PCS Packing Cube - Small

max-PCS

$21.99

The PCS Packing Cube (Small) is a soft container excellent for travel accessories. The packing cube has been designed to be used with larger AGR bags and packs, such as the IRONCLOUD™ and IRONSTORM™. Its fabric is color coordinated to match the grayscale interior lining of other AGR products. The lightweight, collapsible nesting design allows for easy...

View

Out-of-Stock

POUCHES / PANELS

Maxpedition MRZ Mini Organizer

max-MRZ

$37.99

The MRZ Mini Organizer is most noted for its custom molded semi-rigid front face. This semi-rigid component allows extra protection for your personal belongings inside. It has extensive internal organization, including multiple pockets and elastic loops, a Keyper™ to clip your keys to and a grayscale interior with fray-resistant Gossamer™ mesh pockets. (A...

View

Out-of-Stock

POUCHES / PANELS

Maxpedition ERZ Everyday Organizer

max-ERZ

$39.99

NOTE: Currently stocking the 2.0 version The ERZ Everyday Organizer is most noted for its custom molded semi-rigid front face. This semi-rigid component allows extra protection for your personal belongings inside. It has extensive internal organization, including multiple pockets and elastic loops, a Keyper™ to clip your keys to and a grayscale interior...

View

Out-of-Stock

POUCHES / PANELS

Maxpedition UPW Universal Pistol Wrap

max-UPW

$12.99

The UPW Universal Pistol Wrap will fit a wide range of handguns, from sub-compacts to full size. The wrap can also be used for both right- and left-handed draw. Hook backed to fit on any gear with loop fields. When using the Universal Pistol Wrap, please follow all firearms safety procedures to prevent an accidental discharge. Maxpedition advises all...

View

Out-of-Stock

POUCHES / PANELS

Maxpedition DMW Dual Mag Wrap

max-DMW

$12.99

AGR™ Advanced Gear Research: DMW™ Dual Mag WrapThe DMW Dual Mag Wrap has a hook & loop back and can attach to any loop field. It will fit two (2) magazines from a wide range of handgun sizes. It can also be used to hold flashlights, tools, etc. How to use the DMW Dual Mag Wrap:To use the Dual Mag Wrap, open the flaps and lay flat. The Maxpedition logo...

View

Maxpedition Hook & Loop 3x5 Zipper Pocket

Out-of-Stock

POUCHES / PANELS

Maxpedition Hook & Loop 3x5 Zipper Pocket

max-3526

$12.99

A handy hook backed organizer to give holding options to gear with interior loop fields. (No extra gear included) Overall size: 5"(L) x 0.75"(W) x 3"(H) Interior contains slip pocket, elastic organizer with 2 divisions Dual zipper pulls Pocket is fully backed with hook and may be attached to loop field

View

Maxpedition Hook & Loop 5x7 Zipper Pocket

Out-of-Stock

POUCHES / PANELS

Maxpedition Hook & Loop 5x7 Zipper Pocket

max-3525

$14.99

A handy hook backed organizer to give holding options to gear with interior loop fields. (No extra gear included) Overall size: 7"(L) x 0.75"(W) x 5"(H) Interior contains slip pocket, elastic organizer with 2 divisions Dual zipper pulls Pocket is fully backed with hook and may be attached to loop field

View

Out-of-Stock

POUCHES / PANELS

Maxpedition Individual First Aid Pouch

max-0329

$29.99

A nice lightweight and flexible pouch with layout originally meant for first aid carry, but works great for all kinds of organization. (No additional items included) Main compartment: 8"(L) x 2.5"(W) x 6"(H) Lightweight individual soldier combat first aid kit pouch 420-Denier nylon for weight reduction and increased mobility Also excellent for...

View

Out-of-Stock

HARDWARE / DIY

Adhesive Hook VELCRO® Brand

hard-00091

$2.00

Sold by the foot, 1 unit = 1 foot. This is full on Military VELCRO® Brand Hook / Male side done with adhesive / sticky back - brand #72. Great for helmets, small electronics, weapon furniture, and more. The adhesive achieves full bond strength in 24 hours (after applying on the gear surface), and works well in temperature ranges from -20° F to 225° F.

View

HARDWARE / DIY

AustriAlpin Cobra® Buckle 2.25inch Slot

hard-00090

$25.00

The same great Cobra Buckle, just in a less common 2.25inch slot size. Sometimes a bit more space is needed for things like duty belt retro fit projects. AustriAlpin COBRA® quick releases buckles are, without equal, the world's safest, most finely crafted, and strongest load bearing quick release fasteners available. They are also the only stab-lock...

View

On sale!

Out-of-Stock

PACKS / BAGS

Maxpedition Gridflux Pack

max-GRF

$130.00

The GRIDFLUX is a sling pack with a reinforced padded shoulder strap. The pack has two CCW compartments. The first CCW compartment is located in the main compartment of the pack. It is a fully-loop lined zipper pocket that can also be used for other objects, like electronics. The second CCW compartment is located in the back of the pack. It can be...

View

Product available with different options

POUCHES / PANELS

Maxpedition FRP First Response Pouch

max-FRP

$41.99

The FRP First Response Pouch is an updated interpretation of the traditional blow-out medical pouch. It has an interior paracord adjuster used to set the angle of opening for the main compartment. The inside is equipped with elastic straps and pockets for organizing first aid essentials. It comes with two (2) matching TacTie? PJC5? Polymer Joining...

View

POUCHES / PANELS

Maxpedition DEP Daily Essentials Pouch

max-DEP

$39.99

The DEP Daily Essentials Pouch is a two compartment pouch designed for everyday carry. It is sized to wear on a belt or to attach to the side of a pack. A loop field is positioned on the front for patch adhesion. The DEP comes equipped with two matching TacTie PJC5 Polymer Joining Clips for modular attachment to any AGR or legacy pack....

View

Product available with different options

POUCHES / PANELS

Maxpedition CAP Compact Admin Pouch

max-CAP

$38.99

The CAP Compact Admin Pouch is a low-profile pouch when empty, yet expands to fit mission critical items. The front compartment features elastic organizers, an extra pocket, and a plastic keyfob to securely hold key rings. The interior main compartment of the Maxpedition CAP Compact Admin Pouch has a visible grayscale interior, additional elastic...

View

Product available with different options

POUCHES / PANELS

Maxpedition AUP Accordion Utility Pouch

max-AUP

$47.99

The AUP Accordion Utility Pouch is a general purpose sized pouch with accordion style dividers. It has a frontal zippered compartment with elastic organization and a top carry handle made from comfortable Shapeshift™ webbing. It comes with two TacTie™ PJC5™ Polymer Joining Clips for modular attachment to any AGR or legacy pack. Overall...

View

Out-of-Stock

POUCHES / PANELS

Maxpedition SNEAK Holster

max-3535

$12.99

Ambidextrous CCW holster fits most handguns and magazines using adjustable hook and loop closure. Combo platform is made to hold 1 pistol and a magazine. Overall size: 6"(L) x 2"(H) stiffened spine 1" elastic loop fits most handgun magazines

View

Out-of-Stock

POUCHES / PANELS

Maxpedition VOLTA Battery Pouch

max-1809

$18.99

A handy pouch with battery case combo. They work great together or one can take out the battery case to use on its own and fill the carry pouch with other items. Overall size: 5"(L) x 1"(W) x 3.5"(H) Nylon case made from 1000-Denier coated nylon fabric Integral drainage grommet on bottom Fits small camera, iPod, iPhone and most other...

View

Out-of-Stock

POUCHES / PANELS

Maxpedition Cuboid Large

max-1802

$23.99

Cuboid organizers are soft containers excellent for travel and ideal for items that don't wrinkle when folded or rolled. Their mesh areas allow viewing of contents. They are spec'd to fit within each other. Two Medium CUBOID will fit into one Large CUBOID. Two Small CUBOID will fit into one Medium CUBOID. When not in use, they can be stored within each...

View

Out-of-Stock

POUCHES / PANELS

Maxpedition MOIRE pouch 8x6

max-0809

$16.99

The MOIRE™ Pouch 8 x 6 (pronounced "maw-ray") is named after the swirly wave patterns one sees when looking through this translucent pouch. Three separate pockets offer a high degree of organization while the abrasion-resistant mesh construction provides user with a visual of bag contents as well as improved breathability and drainage. This handy...

View

Out-of-Stock

POUCHES / PANELS

Maxpedition Beefy Pocket Organizer

max-0266

$30.99

Handy every day carry organizer just a little bigger than the Fatty version. Can snugly fit in a large cargo pocket, yet works great for pack organization as well. Maxpedition beefed up the #0261 FATTY POCKET ORGANIZER for increased capacity. The Beefy Pocket Organizer is the largest of its kind with optimum interior space for standard...

View

POUCHES / PANELS

Maxpedition Micro Pocket Organizer

max-0262

$16.99

Handy every day carry organizer with slim-bodied exterior. Can fit in a cargo pocket, yet works great for small item pack organization as well. This Micro size is the smallest in the Maxpedition organizer series to allow fitting in the most pocket types. Main compartment: 3.5"(L) x 1"(W) x 5.5"(H) Exterior front: Mesh slip pocket Exterior back:...

View

POUCHES / PANELS

Maxpedition Fatty Pocket Organizer

max-0261

$29.99

A Handy organizer like the EDC version, but with more depth carry capacity. Can fit in a cargo pocket, yet works great for pack organization as well. Main compartment: 5"(L) x 2"(W) x 7"(H) Drops into or attaches onto backpack or bag Full clamshell opening main compartment with dual zippers Inside left: Slip pocket; key leash with clip;...

View

Out-of-Stock

POUCHES / PANELS

Maxpedition Mini Pocket Organizer

max-0259

$20.99

Handy every day carry organizer with slim-bodied exterior, just a little smaller than the EDC Pocket Organizer. Can easily fit in a cargo pocket and will fit into some larger hand and back pockets. Works great for small item pack organization as well. Main compartment: 4"(L) x 1"(W) x 6"(H) Drops into pants cargo pocket or backpack/bag Full...

View

POUCHES / PANELS

Maxpedition Skinny Pocket Organizer

max-PT1312

$30.99

A slenderized version of the Fatty Pocket Organizer allowing it to fit in tighter spaces. Can fit in a cargo pocket, yet works great for pack organization as well. Main compartment: 4"(L) x 2"(W) x 8"(H) Full clamshell opening main compartment with dual zips Inside left: Slip pocket; D-ring and cord lash points; elastic organizer with 6...

View

POUCHES / PANELS

Maxpedition EDC Pocket Organizer

max-0246

$24.99

Handy every day carry organizer with slim-bodied exterior. Can fit in a cargo pocket, yet works great for pack organization as well. Product Features Main compartment: 5"(L) x 1"(W) x 7"(H) Full clamshell opening main compartment with dual zips Inside left: Slip pocket; key ring; elastic organizer with 9 divisions Inside right: Slip...

View

Out-of-Stock

ILLUMINATION

Torq Tactical Light - MSM Batch

flu-torq-le-0001

$98.99

The Torq series made by First Light USA is an solid take on the tactical light concept using a L-shape setup and great core features to separate it from the rest. For those who like the idea of the Tomahawk, but want a more economical option still made in the USA, the Torq makes for a great option. We enjoyed them so much we made our own custom batch with...

View

Out-of-Stock

HARDWARE / DIY

MSM Mini Mod-D Carabiner MkII

hard-00089

$7.00

Our first batch did well and now we bring you with MKII with low snag keynose style!: Overall approx 3.5" x 2" these make for great EDC and backup carabiners. The smaller size cuts down on bulk being better for holding other objects like sets of keys while at the same time these are real deal load bearing capable carabiners if you end up having to do some...

View

POUCHES / PANELS

MSM Vehicle Visor Panel

pouch-00020

$40.00

Wanted to give our shot at a vehicle visor cover to make holding all kinds of small gear easy and quick access. The core of the panel has a lot of horizontal elastic slots, however we also include 3 elastic ties to create vertical elastic zones. One can weave them in many different ways to control the loop size. The loop/pile zones also are sewn down...

View

POUCHES / PANELS

Thyrm Cell Vault Battery Storage

pouch-00019

$19.99

The Cell Vault protects batteries and other critical gear while keeping it accessible and organized. The integrated webbing clip allows you to access the Cell Vault’s contents without removing it, or you can quickly detach it for more control. The Cell Vault easily attaches to M.O.L.L.E., webbing, and straps, and features lanyard loops at both ends,...

View

Out-of-Stock

HARDWARE / DIY

PUP Platforms

hard-00040

$28.95

Finally got around to adding the new variants!The PUP (Pals Universal Platform) from Bawidamann Blades is a rugged, adjustable MOLLE/PALS platform solution for kydex knife sheaths, small magazines, lights and other items that is compatible with many retention systems and all MOLLE/PALS webbing. ST801 Super Tough Nylon - Made and assembled in the...

View

Out-of-Stock

HARDWARE / DIY

MSM Snap Shackle Mini

hard-00085

$5.00

Cool hardware for quick release applications, smaller than usual size. Spring loaded, latch will not release until ring is pulled sideways away from the shackle. Latch can be resecured without pulling ring. Colors are powder coated to offer some tac-colors. Main shackle piece is approx 0.875" x 1.25"

View

HARDWARE / DIY

TT Malice Clip Fight-Light

hard-00084

$2.00

Tactical Tailor's latest gen Malice clips, the new Fight-Light series: Same heavy duty construction and they won’t come unwoven even if accidentally unlocked. They’re not affected by extreme temperature changes, they will never corrode, and on this latest version now they’re easier to weave due to the non-square edges, significantly lighter, 15% stronger,...

View

Out-of-Stock

ILLUMINATION

Tomahawk Tactical Light - MSM Batch

flu-toma

$252.00

The Tomahawk series made by First Light USA is an solid take on the tactical light concept using a L-shape setup and great core features to separate it from the rest. We enjoyed them so much we made our own custom batch with limited markings and subdued MSM logo tail cap. The main thumb switch delivers a 425+ lumens light while the other buttons offer...

View

Out-of-Stock

HARDWARE / DIY

AustriAlpin Cobra® Sport - FM Buckle

hard-00083

$14.00

Taking the success of the Cobra® Buckle, Austri Alpin now has released a Sport - FM(Fashion Model) where you get the same great stab insert design features and quality in a much smaller size. Giving up the human load bearing rating, it sill is rated 800lb working capacity for all kinds of belt and pack gear type projects.NOTE: Just got in a resupply batch...

View

HARDWARE / DIY

550 Cord - Paracord

hard-00082

$4.00

7-strand 550 cord, also known as Paracord, 550 refers to the breaking strength. The outter sheath gives the color then smaller white cords are in the interior. Very useful for all kinds of lashing needs, creating pull cords, bracelets, and much more. Ends can be eaily sealed with flame heat. Currently sold by the YARD. Thus a 10 unit pack = 10 yards /...

View

Out-of-Stock

POUCHES / PANELS

MSM Practical Results Wallet

pouch-00018

$20.00

As the name implies this wallet is meant to be straight forward and get the job done with all the common wallet tasks that may come your way. Unlike super minimal wallets out there that look cool, but don't hold jack and are cumbersome to actually use, the Practical Results Wallet is a good balance of size while offering a variety of holding and quick...

View

Out-of-Stock

HARDWARE / DIY

ITW Bar Button

hard-00081

$0.60

Also known as Canadian style buttons, good for all kinds of projects including paracord, gear, and clothing. This product was developed to meet specific requirements for MILSPEC Govt programs and provides superior physical properties versus conventional melamine 4-hole sewn buttons. The GhillieTEX material not only provides the user with the highest...

View

On sale!

Out-of-Stock

PACKS / BAGS

MSM Boss Beaver

pack-00002

$120.00

After the success of the Adapt Pack we had some requests for a larger pack with more organization features. With that in mind, I’ve always liked the expandable idea of a beavertail, but on those packs I never appreciated how typically one had to release the beavertail to get to other compartments or when not in use the beavertail could be fairly floppy.So...

View

Out-of-Stock

POUCHES / PANELS

MSM GP Insert

pouch-00017

$12.00

A super simple hook backed insert for any gear with loop. This ones sports 2 billowed pockets up front, good for holding small electronics or medical gear, and then has a flat sleeve pocket in the back for flatter items.Approx 6.5" x 6" , made in the USA by Tactical Tailor

View

Out-of-Stock

POUCHES / PANELS

MSM Multitool Insert

pouch-00016

$15.00

A super simple hook backed insert for any gear with loop. This one sports 3 billowed pockets good for holding pistol mags, multitools, medium sized flashlights, and similar sized items.Approx 6.5" x 4.75" , made in the USA by Tactical Tailor

View

Out-of-Stock

FIELD SUPPLIES

MSM Reflector Straps

field-00019

$8.00

We made a test batch of these with bikers and PT folks in mind; a simple solution to easily be able to add reflective capabilities to a pack or belt. Made of 3M Scotchlite Reflective High-gloss vinyl you can be sure you get great durability and reflective power. Length wise we size them so there is enough to flow down a big messenger bag, yet can be sized...

View

HARDWARE / DIY

Cobra® Buckle D-Ring

hard-00080

$29.95

Austri-Alpin took the proven Cobra® Buckle and integrated a big boy D-ring so riggers belts no longer need a totally separate metal ring connection point. Strength rated as follows:~ Buckle: 18kN / 4000lb MBS (straight pull). 36kN Loop configuration.~ Dring: 22kN / 5000 lb MBS (straight pull).Far exceeds ANSI Z359.1, CSA, EN, UIAA, and NFPA standards for...

View

Product available with different options

FIELD SUPPLIES

MSM Notebook Cover Plus

field-00018

$4.50

Like our original cover, with a bonus elastic strap for page retention options: A minimalist approach to be a cover for classic 3" x 5" notebooks like our RITR ones. Instead of some elaborate pouch you have to unzip to access, our MSM notebook cover allows one to do what all you really need; keep a pen or pencil nearby handy. Made of hypalon for the main...

View

Out-of-Stock

FIELD SUPPLIES

MSM Zippo Lighters

zippo-0001

$28.00

Genunie Zippo Lighters with laser engraved MSM designs, even come in a Zippo Box. Starting the party off with black matte and black crackle color options with art laser'd off to show the brass. Genuine Zippo Lighter with Distinctive Zippo Click All metal construction; windproof design works virtually anywhere Refillable for a lifetime of...

View

FIELD SUPPLIES

Camelbak Chute 1L Bottle

field-00017

$15.00

NEW Designs added! MSM Logo, Pirateskull, and Don't Tread on Charcoal bottles.The new Camelbak Chute design is great for those who like to chug their liquids yet not make a mess. To further separate it from the Eddy Bottle we are offering this one in big boy 1Liter size. Some product highlights include: Angled spout provides an ergonomic drink...

View

FIELD SUPPLIES

Live Fire Gear - 550 Fire Cord

lfgear-00002

$9.99

View

FIELD SUPPLIES

Live Fire Gear - Fire Starter

lfgear-00001

$6.99

Live Fire is meant for ALL weather conditions and takes a spark easily from Ferrocerium rod, lighter or match. The entire contents are 100% waterproof and will even light after being submerged in water for long periods of time.Each unit is approximately .90 oz in weight. Burn times average 30 minutes with the lid completely removed. Because the lid slides...

View

Product available with different options

TACTICAL GEAR

Thyrm SwitchBack Flashlight Ring

thyrm-0001

$19.99

NOTE: New Duel Fuel Size available in Black for SureFire Dual Fuel tactical flashlights!The SwitchBack Flashlight Ring enhances your tactical flashlight, adding a pocket clip, and optimizing ergonomics for searching and shooting. The SwitchBack Flashlight Ring mounts between the tailcap and body of your flashlight, making it secure regardless of impact,...

View

Out-of-Stock

HARDWARE / DIY

ITW GTSR 1inch Waveloc Body

hard-00078

$0.75

NOTE: Only the female / body piece is sold on this page. For those tired of their straps slipping through normal buckles on actions such as rucking with speed, the Wavelocs offer a nice strong hold on 1" webbing. These will interface with other ITW 1" male pieces. Due to the tight fit, only a single strip of webbing will fit through the slots so in some...

View

HARDWARE / DIY

ITW GTLL 1inch Ladderloc

hard-00077

$0.45

These are solid ladder-locks made with 1" webbing tactical product use in mind. Great for all kinds of quick adjustment applications; slings and backpack straps being a couple of examples. Typically attached on back slot, the front slot then offers one way webbing movement until tilted to offer two way webbing movement. With the lanyard hole one can add a...

View

Out-of-Stock

HARDWARE / DIY

MSM Snap Shackle Large

hard-00076

$10.00

Our own mix taking stainless steel shackles and getting them locally powder coated. Sport captive pins and welded rings for long term durability. Ranger Green hopefully coming in the near future.This is a larger version of the usual snap shackle for heavier quick release applications. Spring loaded, latch will not release until ring is pulled sideways...

View

HARDWARE / DIY

MSM Snap Shackle Medium

hard-00075

$6.00

Our own mix taking stainless steel shackles and getting them locally powder coated. Sport captive pins and welded rings for long term durability. Ranger Green hopefully coming in the near future. A quick release snap shackle in a common 2" overall length size. Classic hole slot , spring loaded, latch will not release until ring is pulled sideways away...

View

Out-of-Stock

HARDWARE / DIY

MSM Snap Shackle 1" slot

hard-00074

$6.00

Our own mix taking stainless steel shackles and getting them locally powder coated. Sport captive pins and welded rings for long term durability. Ranger Green hopefully coming in the near future.This version sports a 1" wide webbing slot, cool hardware for quick release applications. Spring loaded, latch will not release until ring is pulled sideways away...

View

HARDWARE / DIY

Spring Loaded Cam Buckle

hard-00073

$5.50

Sometimes referred to as a quick release cam buckles, these have been in use since the ALICE gear era and are still used on cool guy slings today. General idea is they restrict webbing movement to one direction until the spring release is pulled to allow webbing movement in both directions. Made of metal they are quite durable and the design offers a...

View

HARDWARE / DIY

BFG Molded Burnsed Socket

hard-00071

$19.95

A great piece of hardware to create a QR hole that can be attached by webbing offering great sling multipoint options and more. Although currently slotted more for 1.25" webbing, can work fine on 1" webbing as well. Constructed with a metal QR hole and polymer base offering a great balance of durability and affordability.

View

On sale!

Out-of-Stock

HARDWARE / DIY

BFG RED Swivel

hard-00069

$25.00

Rapid Emergency Detachment Swivel (RED Swivel): A great piece of hardware that takes the concept of a QR swivel, but works with the gross motor movement of a grab and pull instead of the push of a small button. Fits anywhere a normal QR swivel could go. The patent pending RED™ Swivel releases with a straight pull on the sphereo-conical knob instead of...

View

POUCHES / PANELS

MSM Wrap Holster

pouch-00015

$14.00

Made for bags with loop / pile interior zones, this pouch was originally sized to fit combat pistols, but also fits rifle magazines, "flat" electronics like smartphones, and more. After using many hook backed holsters that always seemed to snag on the front sight during a draw, we came up with this one to offer clean draws even on full sized pistols with...

View

POUCHES / PANELS

MSM Wrap Multi Pouch

pouch-00014

$11.00

Made for bags with loop / pile interior zones, this pouch was originally sized to fit pistol magazines, but also fits multi-tools, medium sized flashlights, and more. Since the whole pouch is made of VELCRO® Brand ONE-WRAP® you can get creative with the shape such as making a slight cone shape resulting in a reasonable opening, but a tight fit when the...

View

POUCHES / PANELS

MSM Shear Pouch Plus

pouch-00013

$12.00

Based on our simple shear pouch, we decided why not go ahead and add on elastic loops to allow holding of a tourniquet as well. The loops are a nice snug fit good for holding popular tourniquets such as the CAT and SOF-T. Due to the layout change, the security strap is now VELCRO® Brand ONE-WRAP® based which releases easy while still providing a good...

View

Out-of-Stock

FIELD SUPPLIES

MSM Tactical Notes Set

field-00014

$19.95

Combining everything you need for a minimalist tactical notes taking package; starting with our slim notebook cover, you also get the appropriately sized and great functioning all weather pen. So you can get immediately started, a MSM logo RITR notebook is included free with every set! Currently all the pens are black, but we have Tan and Black notebook...

View

POUCHES / PANELS

MSM Tac-Organizer Pouch

pouch-00012

$35.00

Based on the Stealth Admin pouch, we wanted to go with a slightly slimmed down and simplified version. The zippers go down further for wider access to the main compartment, yet stop soon enough so goods do not spill out. Interior has 3 billowed pockets on the frontal side and 2 billowed pockets on top of a sleeve pocket on the back interior side. The 3...

View

Out-of-Stock

BLADES

KA-BAR MSM Knife 001

blade-00001

$55.00

It took a while, but we are happy to release our collab knife with KA-BAR. The general idea is to have a big ass tanto with an enhanced thumb ramp and thick enough for plenty of abuse. All kinds of grips are possible with the thumb ramp particularly forming great to one's hand in a reverse blade forward grip. Everything is included to get to business...

View

HARDWARE / DIY

ITW GT Cobra® Buckle

hard-00066

$4.75

ITW Nexus North America is proud to partner with AustriAlpin, the GT Cobra high strength polymer buckle system. Designed to be more robust than any other type of plastic hardware on the market, with a targeted tensile load of 500lbf, the GT Cobra buckle is a 100% Polymer system with no metal components. A few of the many GT Cobra advantages include its...

View

Out-of-Stock

HARDWARE / DIY

ITW G-Hook Flat

hard-00065

$2.25

NOTE: These are the standard / flat version 09241-22-2188xG-hooks offer compact webbing mods connecting with a simple hook to 1" webbing and offering 1" slots to connect additional webbing. Example attachment points include the sides of tac-vests or up on shoulder straps (packs or vests). Since metal, the G-hooks are very flat compared to a typical SRB...

View

Out-of-Stock

HARDWARE / DIY

AUSTRIALPIN Cobra® Frame

hard-00064

$13.00

Based on the AustriAlpin COBRA® buckle styling, these special tri-glides feature extremely high strength (18kN) and low profile design. Made of 7075 grade aluminum alloy with stainless steel adjuster bar. NOTE: AA has been transitioning from annodizing colors to powder coat colors so the coyote color can vary quite a bit, check in with us if you require...

View

POUCHES / PANELS

MSM Stealth Compact Pouch

pouch-00011

$39.00

This is our Compact variant based on the original Stealth admin pouch. Coming in at about 2/3rds the width it allows for some more mounting options while still being a great organizer for multitool sized items such as: medium sized flashlights, folding knives, pistol magazines, and similar tools. For the interior we settled down on the elastic and...

View

FIELD SUPPLIES

MSM Notebook Cover

field-00013

$4.00

A minimalist approach to be a cover for classic 3" x 5" notebooks like our RITR ones. Instead of some elaborate pouch you have to unzip to access, our MSM notebook cover allows one to do what all you really need; keep a pen or pencil nearby handy. Made of hypalon for the main material it is super durable and slip resistant. We even added a stash pocket on...

View

Out-of-Stock

HARDWARE / DIY

MSM QR Keychain Econo

hard-00063

$8.00

The core strap is made of VELCRO® Brand ONE-WRAP® which allows placement of mini patches 2"x1" now using our powder coated snap shackles. Most folks will connect the QR shackle to something like a belt loop, but feel free to get creative connecting to other gear such as vests and packs. Currently made in house at MSM in the USA.-No Patches Included. NOTE:...

View

Out-of-Stock

HARDWARE / DIY

MSM QR Belt Rig Econo

hard-00062

$8.00

Based on our original QR belt rig, this variant uses less expensive parts to give good bang for the buck. We use one of our 2nds snap shackles which doesn't have a super durable coat, but functions great and instead of a g-hook a simple tri-glide is used. Although made with belts in mind, feel free to get creative connecting to other gear such as vests...

View

Out-of-Stock

HARDWARE / DIY

54inch Multicam Loop VELCRO® Brand

hard-00061

$65.00

Have a special large project like a morale patch banner where only the finest MIL velcro will do? This is full on VELCRO® Brand Loop fuzzy side done in Multicam camouflage with excellent color matching. The width is 54", Sold by the yard, 1 unit = 1 yard, this is the sew on version. If multiple yards are purchased we will assume to pack without...

View

Out-of-Stock

FIELD SUPPLIES

TK-4L Tourniquet

field-00012

$12.00

The TK-4L Tourniquet is based on the TK-4 with a hardware upgrade of replacing one end with a tension hook to help allow maximum pressure. Still economical and compact, It can be applied with one hand and can be multipurpose such as used to apply pressure to bandages. Due to the size and overall low cost, these make for great backup and everyday carry...

View

Out-of-Stock

FIELD SUPPLIES

TK-4 Tourniquet

field-00011

$7.00

The TK-4 Tourniquet is an economical and compact tourniquet composed of simple elastic and steel hooks. It can be applied with one hand and can be multipurpose such as used to apply pressure to bandages. Based on my own experience I highly recommend bending the hooks a little more closed for more reliable rapid application. Due to the size and low cost...

View

HARDWARE / DIY

Positive Locking Cord

hard-00060

$3.00

This Berry Compliant Cord is a similar width to 550 cord, however the rough texture makes it very grippy and hence the name, positive locking. Great for all kinds of lashing and tactical crafts, Just like 550 cord, the ends can be easily burned to seal / finish. Currently sold by the YARD. Thus a 10 unit pack = 10 yards / approx 30 feet.

View

HARDWARE / DIY

Shock Cord

hard-00059

$4.00

Berry Compliant Shock Cord Made with Invista IR Compliant nylon yarn. Shock cord works great as an elastic cord, popular on packs and other gear, a very handy DIY resource. Currently sold by the YARD. Thus a 10 unit pack = 10 yards / approx 30 feet.

View

PACKS / BAGS

MSM Adapt Pack

pack-00001

$130.00

NOTE! Latest 2022 batch includes updates of double slider zippers on front compartment and loop on front side main compartment interior.The MSM Adapt Pack is our first pack design in collaboration with Tactical Tailor. The general design concept to be a lightweight pack that is ready for military use, while being just as handy for hard use civilians....

View

POUCHES / PANELS

MSM Bottle Corset

pouch-00010

$35.00

Since we sell different bottle types we thought a versatile pouch would be appropriate. The MSM Bottle Corset design concept is to be a bottle holder that is very size flexible and built military tough. It can hold 32oz bottles such as the Nalgene while being adjustable down to small 12oz bottles. Being highly customizable, how the cords are routed allows...

View

On sale!
-40%

Out-of-Stock

HARDWARE / DIY

AustriAlpin Cobra® Buckle

hard-00058

$5.94 $9.90

Now sold as half buckles / parts to allow better customization! However one will need to buy both a male AND a female piece to make a complete buckle. (The classic standard is a male adjust and female fixed) AustriAlpin COBRA® quick releases buckles are, without equal, the world's safest, most finely crafted, and strongest load bearing quick release...

View

HARDWARE / DIY

ITW D-Ring

hard-00054

$0.35

ITW Nexus D-Ring are perfect wherever a rigid attachment point is required. Unlike metal D-Rings, they won't rust or corrode. 1 unit = 1 D-ringITW Part Number: 110-0100-xxxx

View

Product available with different options

HARDWARE / DIY

ITW Tri-Glide 1inch

hard-00053

$0.45

View

HARDWARE / DIY

Adhesive Loop VELCRO® Brand

hard-00052

$4.00

Sold by the foot, 1 unit = 1 foot. This is full on Military VELCRO® Brand Loop fuzzy side done with adhesive / sticky back - brand #72. Great for helmets, small electronics, weapon furniture, and more. The adhesive achieves full bond strength in 24 hours (after applying on the gear surface), and works well in temperature ranges from -20° F to 225° F.

View

HARDWARE / DIY

VELCRO® ONE-WRAP® Brand 1inch

hard-00051

$2.90

Sold by the YARD:VELCRO® Brand ONE-WRAP® has many uses, but for gear it really shines offering strap and wire management. A great replacement to where duct-tape was the common choice in the past, with one-wrap being much easier to release and reuse. One side is hook and one is loop, however the hook style is done lower profile so it doesn't accidentally...

View

Out-of-Stock

HARDWARE / DIY

ITW Picatinny QASM Ramp

hard-00050

$5.00

The Picatinny QASM-RAMP is designed to mount, hold and/or organize any/all of your M1913 Picatinny mountable accessories. Introduce this ultra-modular capability to your kit for unlimited mounting options in any location containing 1” sewn webbing. The new Picatinny QASM-RAMP can be used in numerous scenarios, whether it is mounting your incident camera,...

View

Out-of-Stock

CLIMBING

Fusion Terminal 8

hard-00048

$25.00

This aluminum descender has a large inside diameter with ears and belay slots. Large design makes it ideal for fast use in adverse conditions and easier to handle heavy loads. Ears allow user the ability to tie off the rope to use both hands freely. Overall approx 6.8" x 6.7" Width Height Major Weight Weight 6.8" 6.7" 45kn...

View

CLIMBING

MSM Pear-S Carabiner

hard-00041

$12.00

With no luck getting a hold of carabiners in good colors we had to take matters into our own hands. These are great Pear / HMS shape S-Screwlock carabiners; Light weight aluminum sporting a classic pin nose for the most strength. The Pear shape offers a large gate opening and can be a belay device using a HMS knot. The screw lock is well knurled for a...

View

HARDWARE / DIY

ITW ZipLine Alpha

hard-00039

$0.75

These zipper pulls offer some nice benefits over traditional plastic end tabs. Since a fancy visco-elastic molded rubber-like material it will not absorb fluids. Tensile strength is around 40lbs so plenty enough to stand up to normal use, but will break away if snagged during heavy movement rather than resulting in a bad day. Different sliders will offer...

View

Out-of-Stock

HARDWARE / DIY

MSM Retracto-Plugs

hard-00038

$9.00

Based on the tech used on our DLUX CG hats we are now bringing the same great functionality for helmets. Each pack contains 2 retractors each with a plug, with hook and loop sticky-back fastener circles. The plugs themselves are triple-flange style, 25 db rated, and are also replaceable using a screw mount. Although most users will use hook and loop for...

View

CLIMBING

Safety Snap DA

hard-00037

$20.00

View

Out-of-Stock

HARDWARE / DIY

MSM QR Belt Rig

hard-00036

$14.00

A seemingly simple rig made to allow a quick release setup on belts. The G-hook supplies many features including tri-glide functionality, alternate PALS connection, and enhanced grip when threading through both the hook and slots. Which side the pull cord faces can be easily changed by disassembling and flipping over the G-hook. Elastic is included to...

View

Out-of-Stock

HARDWARE / DIY

Para V-ring

hard-00035

$8.00

Commonly used on rigger's belts, this V-ring fits 1.75" webbing, or 1-23/32" if you want to get para-technical. Forged steel and rated as Strength: 4000 lb

View

Product available with different options

HARDWARE / DIY

Para Adjuster Bar

hard-00034

$8.75

Commonly used on rigger's belts, this adjuster bar fits 1.75" webbing, or 1-23/32" if you want to get para-technical. Forged steel and rated as Strength: 5000 lb

View

HARDWARE / DIY

1.25inch QD Sling Swivel

hard-00033

$14.00

These are great for weapon rail packages, stocks, and accessory mounts that support QD Sling Swivels. Loop itself rotates freely on one axis, however when installing into a mount, user can choose horizontal or vertical mounting rotation (90 degree flexibility). Release is performed by pressing the top "button". Gunmetal Grey color, sized to interface best...

View

Out-of-Stock

HARDWARE / DIY

1inch QD Sling Swivel

hard-00032

$12.00

View

HARDWARE / DIY

Grenade Rings

hard-00027

$0.75

Genuine grenade rings, only used once (ha!), make for great heavy duty keyrings as the thick wire used makes them much more bend resistant compared to typical keyrings. Approx 1" inner diameter and 1.25" outer diameter.For cart clarification 1 unit = 1 ring.

View

Out-of-Stock

HARDWARE / DIY

Keyring 1inch ID 1.25inch OD

hard-00026

$0.50

Some simple EDC kit, these are sturdy black keyrings. Approx 1.25" outside diameter, 1" inside diameter. A slightly beefy version of the size most expect a common keyring to be.

View

Out-of-Stock

HARDWARE / DIY

Keyring 1.25inch ID 1.5inch OD

hard-00025

$0.80

Some simple EDC kit, these are beefy dark grey keyrings. Approx 1.5" outside diameter, 1.25" inside diameter.

View

Out-of-Stock

HARDWARE / DIY

ITW 1" Oval Slide

hard-00024

$0.75

View

Out-of-Stock

HARDWARE / DIY

ITW Tac-Link

hard-00023

$4.00

These are great for non climbing carabiners. Rated at about 300lbs breaking strength, this is more than enough to secure a weapon, yet is a good spec to break away if heavily snagged to prevent injury. The latch hook has also been removed for general easier usability. The TAC-LINK is a high strength polymer attachment device with GhillieTEX™ IR signature...

View

Out-of-Stock

HARDWARE / DIY

ITW G-Hook Wave

hard-00022

$2.50

NOTE: These are the middle bar with wave variant 19241-22-2188xG-hooks offer compact webbing mods connecting with a simple hook to 1" webbing and offering 1" slots to connect additional webbing. Example attachment points include the sides of tac-vests or up on shoulder straps (packs or vests). Since metal, the G-hooks are very flat compared to a typical...

View

HARDWARE / DIY

ITW SurfaceMount 1inch

hard-00021

$1.00

ITW 1" Surface Mount Buckle consisting of 3 parts to make 1 unit:810-1059-xxxx – Surface Mount Buckle810-1060-xxxx – Surface Mount Base810-1058-xxxx – GTSR-1 maleAnother great SRB option, these Surface Mounts allow the female portion to be attached to fabrics. An example use is on magazine pouches as they enhance ease of use due to the female portion...

View

Out-of-Stock

HARDWARE / DIY

ITW Waveloc Male

hard-00020

$0.50

NOTE: Only the male piece is sold on this page. For those tired of their straps slipping through normal buckles on actions such as rucking with speed, the Wavelocs offer a nice strong hold on 1" webbing. These will interface with other ITW 1" female pieces such as repair buckles, surface mounts, and the QASM. Due to the tight fit, only a single strip of...

View

HARDWARE / DIY

ITW Tac-Toggle

hard-00019

$0.65

A simple piece of hardware that can enhance the pull capability of cordage. 2 holes in the center allow 550 cord size cord to be wrapped or tied as desired. Can be grabbed in numerous ways, but excels when gripped between fingers in a fist. Size is a good balance of grip-ability while not being a large snag hazard.ITW Part Number 743-0200-XXXX

View

HARDWARE / DIY

ITW QASM

hard-00018

$1.00

ITW 1" QASM (Quick Attach Surface Mount Buckle) consisting of 2 parts to make 1 unit:810-1076-xxxx – QASM Body810-1058-xxxx – GTSR-1 male(The result being 1 complete buckle)These are similar in concept to the repair buckles, however lay nice and flat consistently in place for a more low profile end result. Using the splits, no sewing is required and can...

View

HARDWARE / DIY

Multicam Loop VELCRO® Brand

hard-00015

$2.00

This is full on VELCRO® Brand Loop fuzzy side done in Multicam camouflage with excellent color matching. Sold by the foot, 1 unit = 1 foot, this is the sew on version.

View

HARDWARE / DIY

Hook and Loop

hard-00014

$1.50

Good MIL-Spec stuff and we are selling it by the foot. Hook is the male side with little hooks while loop is the the soft female side. This is the sew on version. Both sides, hook and loop are supplied with each foot unit purchased.

View

Out-of-Stock

HARDWARE / DIY

ITW Mash Hook 1.25inch slot

hard-00013

$3.25

The MASH (Metal All-purpose Snap Hook) gateless snap hook offers an alternative to the HK-style snap hooks in common use for sling systems. The MASH is constructed from stainless steel and comes in sizes for 1" and 1.25" wide webbing. (NOTE this page is selling the 1.25" slot version) Pressing on the thumb tabs in the middle separates the two rings,...

View

Out-of-Stock

HARDWARE / DIY

ITW Mash Hook 1inch slot

hard-00012

$3.00

The MASH (Metal All-purpose Snap Hook) gateless snap hook offers an alternative to the HK-style snap hooks in common use for sling systems. The MASH is constructed from stainless steel and comes in sizes for 1" and 1.25" wide webbing. (NOTE this page is selling the 1" slot version) Pressing on the thumb tabs in the middle separates the two rings,...

View

HARDWARE / DIY

ITW GTSP Cordlock

hard-00011

$0.65

These cordlocks are designed with adventure use in mind. Top has raised bars for extra grip, side slots allow sew-down capability, and the bottom has a hole for drainage. The inside even has a raised wedge to enhance cord grip. The overall size is very compact allowing locking of 2 pieces of cord that are similar size to 550 paracord. These are great for...

View

Product available with different options

HARDWARE / DIY

ITW Web Dominator

hard-00010

$1.25

These lil guys are great for any gear with 1" straps that need slack management. Traditionally duct tape is used as semi-permanent solution, but with Web Dominators you can get the holding power with dramatically better on/off speed and no sticky mess to boot. This way the slack can still exist to give sizing options, yet isn't dangling everywhere as a...

View

HARDWARE / DIY

ITW 1" Repair Buckle

hard-00009

$0.75

ITW 1" Repair Buckle (SRB) consisting of 2 parts to make 1 unit:810-1064-xxxx – SR 1” female replacement buckle810-1058-xxxx – GTSR-1 male The main design goal for these buckles was to replace broken 1" Side Release Buckles (SRB) without any sewing required. They work great for that, however I like to use them to add straps to my gear since they easily...

View

HARDWARE / DIY

ITW Grimloc

hard-00008

$2.00

ITW Military Products Grimloc (Locking D-ring) ITW Part Number 110-4100-xxxx Originally made to allow Marines to add hydration carriers to their vests, these Grimlocs can be added to anything with PALS / MOLLE style 1" webbing. Once on, they make a great attachment point for weapon slings, lanyards, pouches, and more! The Grimloc™ is fabricated from...

View

Out-of-Stock

HARDWARE / DIY

Snap Shackle Mini

hard-00007

$7.50

Cool hardware for quick release applications, smaller than usual size. Spring loaded, latch will not release until ring is pulled sideways away from the shackle. Latch can be resecured without pulling ring. Come a little stiff, but break in well. Main shackle piece is approx 0.875" x 1.25"

View

Out-of-Stock

HARDWARE / DIY

Snap Shackle Large

hard-00006

$12.00

Some customers wanted a load bearing snap shackle, so here you go in cool guy black to boot. A little bit pricey, but cool hardware for quick release applications. Spring loaded, latch will not release until ring is pulled sideways away from the shackle. Latch can be resecured without pulling ring. 2.625" total length when closed x 1.5" width not counting...

View

HARDWARE / DIY

Snap Shackle Medium

hard-00005

$7.50

A quick release snap shackle in a common 2" overall length size. Classic hole slot is easier to come by so a cheaper option than the 1" webbing slot version. Spring loaded, latch will not release until ring is pulled sideways away from the shackle. Latch can be resecured without pulling ring. Approx 1.25" x 1.875" closed and not counting the pull ring.

View

Out-of-Stock

HARDWARE / DIY

Snap Shackle 1" slot

hard-00004

$8.50

Black color with 1" slot. A little bit pricey, but cool hardware for quick release applications. Spring loaded, latch will not release until ring is pulled sideways away from the shackle. Latch can be resecured without pulling ring. Although not for human load bearing, it can still hold a lot of weight. Approx 1.25" x 1.625" closed and not counting the...

View

Out-of-Stock

HARDWARE / DIY

HK Snaphooks - ITW Clash-hooks

hard-00003

$4.25

Clash Hooks, ITW Military's take on the HK style 1" slot Snap Hooks: offering cool guy colors and solid quality.ITW Part Number: 09267-23-210xx

View

FIELD SUPPLIES

Nalgene 32oz Wide

field-00010

$12.00

If you need a simple water bottle it is hard to beat the bang for the buck on good ol' Nalgene. Made of Eastman Tritan they are very durable, BPA free, top-rack dishwasher safe, and made in the USA. They won't retain odors and resistant to staining as well. The wide mouth makes for easy pouring and access for cleaning later. The popular mouth size also...

View

FIELD SUPPLIES

Rip Shears

field-00009

$27.00

Rip-Shears: high speed trauma shears offering both cut and rip capability. Starting with the shears they are CE-approved fully assembled shears with black anodized surgical stainless steel blades offered in many tactical handle colors. The same attention for quality has been put into the ripper where the blades are made from 440A surgical grade stainless...

View

FIELD SUPPLIES

Tac-Clicker All Weather Pen

Rite In The Rain

field-00008

$20.95

Pencils will work great on Rite in the Rain but sometimes you just need a pen. This 5.25" long metal All-Weather Pen writes on wet paper and upside down in temperatures from -30F to 250F. The ink won't leak, evaporate or blow up in your pocket! The whole end works as a clicker to offer speedy pen tip deployment and storage. Comes in a nice matte black and...

View

FIELD SUPPLIES

Rite In The Rain Notebooks

field-00007

$4.95

Black, Grey, and Brown now available! Protect yourself and your notes by using Rite in the Rain Tactical Pocket Notebooks. These 3" x 5" and 4" x 6" spiral bound notebooks have 100 Universal pages (50 sheets) in Green or Tan. With pages using the Universal Pattern, it is useful for notes and scaled drawings. Bonus scale reference material is also printed...

View

FIELD SUPPLIES

Camelbak .75L Bottle

field-00006

$16.00

We've been a personal fan and users of the Camelbak Better Bottle series so finally got around to making a custom batch with MSM artwork. The eddy .75L version is easy to fit in one's hand and uses the quick and effective spill proof flip up bite valve. No more having to unscrew off a top every time you want a drink! BPA-Free yet very durable materials...

View

FIELD SUPPLIES

SOF Tac Tourniquet Wide

field-00005

$30.00

NOTE: Latest Gen5 version with TRAC clip and polymer buckleOne of our favorite tactical tourniquets currently available, they are full featured fixing the known issues of the popular CAT tourniquet. Important design features include: Easy to tighten, Able to apply one handed, Heavy duty materials to allow very tight compression, Strap disconnect point for...

View

Product available with different options

FIELD SUPPLIES

MSM EMT Shears Mini

field-00004

$4.00

Handy EMT / Medical Shears good for cutting about anything, but primarily used for removal of clothing on wounded patients to allow access to injuries. Overall solid in quality, they can do all the classics like cut pennies, however are affordable enough to be disposable just in case you use them on some messy situations. This is a specialty mini size to...

View

FIELD SUPPLIES

MSM EMT Shears

field-00003

$5.00

Handy EMT / Medical Shears good for cutting about anything, but primarily used for removal of clothing on wounded patients to allow access to injuries. Overall solid in quality, they can do all the classics like cut pennies, however are affordable enough to be disposable just in case you use them on some messy situations.About 7.5" in total length when...

View

Out-of-Stock

FIELD SUPPLIES

ITW Marine Whistle

field-00002

$1.50

These whistles can serve military and civilians alike offering a way to get others' attention whether it be in a rescue or threat situation. The size is slim while still offering a nice grip with an incorporated clip that fits great on webbing. Usability is easy which is important in a stressful situation. Just blow hard and you will be good to go making...

View

POUCHES / PANELS

ITW Pistol FASTMag

pouch-00008

$28.00

Based on the Original Fastmag design, this pistol variant offers the same great features to another caliber class. The open top design reduces reloading time for the operator and can be mounted in the up or down position. The enhanced urethane tension strap is adjustable to meet the users preference for removal tension. The FMP is also designed to...

View

POUCHES / PANELS

MSM Loop Panels

pouch-00006

$19.00

NOTE: These are sold in pairsI created these due to noticing more and more gear incorporating loop / pile areas for modular attachments, but then there are slim pickings of actual attachments on the market. In my initial prototyping phase I started with long elastic strips and soon found out they curl up big time once items were placed inside. After...

View

POUCHES / PANELS

MSM Shear Pouch

pouch-00005

$10.00

Since we started slanging 7.5" shears, we thought we might as well offer a pouch to hold them. A simple design with hook and loop flap closure. Flap is long enough to give the user options on how to secure the shears as desired. They mount using a short Malice clip on the back which is included! Bonus cord loop is located at the bottom as a lanyard lash...

View

POUCHES / PANELS

MSM Mega Patch Book

pouch-00004

$71.00

NEW: Limited color batch Black with MulticamBlack webbing now available I noticed some of my customers out there purchasing multiple patch books, so I thought it was time to offer some kit for the serious patch collectors. I got together with my buddies at Tactical Tailor and they manufactured my design rugged and milspec as always. Originally designed...

View

POUCHES / PANELS

MSM Stealth Util / Admin Pouch

pouch-00003

$42.00

The original MCAP was a success, however some users wanted a more quiet variant. So I took the main ideas and applied a zipper based design. The end result is not as speedy to access, but has full security closure with the zippers and can be opened with minimal noise. The Stealth can't hold two 30 round NATO mags vertically like the MCAP can, but a user...

View

POUCHES / PANELS

MSM Small Patch Panel

pouch-00002

$13.00

*UPDATE: ACU color has been changed to solid Folaige, Multicam is now availableSince I slang so many patches, people have requested platforms so I came up with this lil guy. It is a collaboration effort being designed by Mil-Spec Monkey and manufactured by Tactical Tailor in the USA. This small panel is wide enough to fit name tapes, and tall enough to...

View

HARDWARE / DIY

Kong Frog

hard-00016

$22.00

These are a pretty cool unique high speed connector hardware piece. The size works great for climbing type rope or connecting to hardware such as D-rings on Rigger's Belts. To operate, just push the side tabs in and the front will be ready for insertion. Connecting will cause the system to auto close. To release, gently pull away while pushing in the side...

View

Out-of-Stock

POUCHES / PANELS

Monkey Combat Admin

pouch-00001

$36.00

I've had this design cooking for probably over a year and I'm happy to announce it is finally here. In collaboration with Maxpedition, this will be my first public release design. I knew I could count on Maxpedition to make these with exceptional quality using their hard-use gear standards. The main Idea behind the pouch is to find a balance of size for...

View

Showing 1-264 of 264 item(s)